|
|
airboat
posted by
220 gpu 12ft deckover motor topend rebuilt 6 blade
warp drive prop new cage
|
1513
|
Great
|
$6.00
|
Fri June 6, 2008 21:37
|
|
|
14'6" Diamondback
posted by REDRIVERAIRBOATS
This Is a 14'6" Diamondback with 2'6" grass rake
it has Anodized Aluminium Rigging very good
looking boat runs well. The boat has less than
100hrs, it has a 502/502, belt red ...
|
1410
|
Excellent
|
$25,685.00
|
Tue April 8, 2008 13:45
|
|
|
11' ALUMINUM FULLY DECKED W/ 180 LYCOMING
posted by
11' ALUMINUM FULL DECK WITH 180 LYCOMING, 5
BLADE,8"TRANSOM.18 GALLON FUEL TANK, CUSTOM HOUSE
OF COLORS PAINT. IS A 85 MPH BOAT. WITH TRAILER.
$14.500.00.OBO
|
1348
|
Excellent
|
$14,500.00
|
Sun June 1, 2008 15:09
|
|
|
2007 14' laser hand laid around 300 hp io470-13
posted by ptr34
30 hour on fresh top end and 45 hours on fresh
bottom end. powder coat condit metal works, 2
single carbon fiber seats, 2 blade Q fuel
injected,possibly trade for a flats boat
|
1347
|
Excellent
|
$13,000.00
|
Sat May 24, 2008 19:57
|
|
|
8 CYLINDER GITSU 425 HP -4 sale / trade
posted by CRACKERSTYLE
This is a 12' step hull (hand laid)- on top is
sittin a 425 HP BIG BLOCK gpu 8 cylinder Gitsu.
ALL the cylinders were sent back to Continental to
be chromed- Has Aircraft Rods ...
|
1236
|
Great
|
$14,999.00
|
Thu May 22, 2008 00:18
|
|
|
Alumitech / Water Thunder 2007
posted by RLSMITH
2007 Alumitech 13.6'x7.9' with Water Thunder LS2
500HP, Hull has 2ft rake with step, upgraded
polymier to 3/8, recently polished hull and gas
tank which holds 38 gallons, Rota ...
|
1214
|
Excellent
|
$31,500.00
|
Mon June 2, 2008 03:07
|
|
|
mini
posted by jwoodl01
2007 9'6"x 6'6" custom built mini . The boat is
hand laid glass with honeycomb structure and
aluminum runners. 31 hp briggs and straton with
belt reduction that turns a 3 blad ...
|
1172
|
Excellent
|
$5,500.00
|
Thu May 29, 2008 18:06
|
|
|
Bad to the bone
posted by
2006 12'8 Gilleo with slick bottom, pollished
stainless steel rigging side by side rear driver
with a removable double front seat. 350 hp. chevy
sb 350, demon carb,2.37 rotat ...
|
1099
|
Excellent
|
$13,500.00
|
Sun June 8, 2008 02:24
|
|
|
2008 Turn Key 14ft Gilleo O-540 Lycoming
posted by lordy,lordy 0-540
Turn Key Boat 2008 14ft gilleo hull, O-540
Lycoming fuel injected straight valve, 6 blade
warp drive, little John stainless riggin,
detachable single front seat. Front seat dr ...
|
1094
|
Excellent
|
$15,500.00
|
Sat May 31, 2008 02:17
|
|
|
13ft. laser ,gpu,powdercoated metal works,poly
posted by
motor has less than 40 hrs,poly is new,3 blade
sensnich carbon prop,run dry with 3 people, no
leaks ,no problems , low steel trailer
|
1092
|
Great
|
$6,500.00
|
Mon May 19, 2008 15:47
|
|
|
laser with 220 h.p. gpu
posted by
13 ft laser 6 cyl gpu ,poly bolted with
stainless,powder coated metals,3 blade sensenich
prop, built in 05
|
990
|
Great
|
$5,500.00
|
Sat May 24, 2008 17:33
|
|
|
Airboat
posted by
125 Lycoming (0235), 6'8"x11' deep glass hull,
Polymer bottom, grass rake, marine battery, Warp
drive 3 blade glass prop, stainless mufflers,
cable steering, two seats, great ...
|
984
|
Excellent
|
$6,000.00
|
Wed June 18, 2008 20:50
|
|
|
|
| Users |
2,517 |
| Active Ads |
437 |
| Comments |
185 |
| Views |
194,686 |
| Items Sold |
560 |
| Value of items sold |
$2,458,973 |
|
|
