Search found 3062 matches

by Deano
Mon Mar 27, 2017 10:27 am
Forum: Airboat Talk
Topic: WHY
Replies: 8
Views: 403

Re: WHY

Good for them, I'd say . . . and
Very nice backyard, by the way ! :thumbleft:
by Deano
Mon Mar 27, 2017 10:21 am
Forum: Airboat Talk
Topic: WHY
Replies: 8
Views: 403

Re: WHY

Yikes !! :shock: Sure glad he wasn't seriously hurt, that could have been waaaay tragic. Not to make excuses for them, but my guess is that the power company subcontracted that work be done and a sub-contractor did that. Generally, the power company would know better. Don't know where that's at, but...
by Deano
Mon Mar 27, 2017 9:58 am
Forum: Airboat Tech
Topic: Ideal hull shape to not hop or plow?
Replies: 22
Views: 733

Re: Ideal hull shape to not hop or plow?

If you have that option and preference, there is certainly nothing wrong with that. I hope my effort to help save you some grief, I didn't make things seem like it isn't something you could do for yourself. I was only meaning to convey that there were more variables involved than what adding jacks w...
by Deano
Mon Mar 27, 2017 9:08 am
Forum: Airboat Talk
Topic: Airboat reduction
Replies: 7
Views: 718

Re: Airboat reduction

It never ceases to amaze me how simple TROLLS can be. :roll:

Why would anybody pay your dumb asses to write an essay when it is exceedingly
obvious you're not familiar enough with our language to even complete a troll's post ?

Image
by Deano
Sat Mar 25, 2017 9:39 am
Forum: Airboat Tech
Topic: Ideal hull shape to not hop or plow?
Replies: 22
Views: 733

Re: Ideal hull shape to not hop or plow?

You can believe it now or believe it later, but with the number of variables involved, your chances of randomly changes things hoping to find the right combo to correct a porpoising problem are akin to winning the lottery. To start in the beginning, just answer the question "Why does it porpois...
by Deano
Fri Mar 24, 2017 8:47 am
Forum: Automotive Power Only
Topic: Carburetor Expert
Replies: 2
Views: 170

Re: Carburetor Expert

He sounds like south Florida's version of Allen Bills who is the Texas carb whisperer. :thumbleft:
by Deano
Fri Mar 24, 2017 8:38 am
Forum: Hunting & Fishing
Topic: Is it suicide??
Replies: 5
Views: 406

Re: Is it suicide??

mojoe wrote: . . . He had one of those turkey fans on a stick and was crawling
behind it down a fire break trying to sneak up on my buddies decoys. . .
Never heard of Turkey Lust before . . . his case must be as bad as it gets ! .. :lol:
by Deano
Mon Mar 20, 2017 8:15 pm
Forum: Airboat Talk
Topic: Injured Florida State Trooper
Replies: 6
Views: 656

Re: Injured Florida State Trooper

Will do. Thanks for the update.

Keep 'em coming when you have the chance.
by Deano
Mon Mar 20, 2017 4:30 pm
Forum: Airboat Tech
Topic: Plan design foar airboat France
Replies: 12
Views: 475

Re: Plan design foar airboat France

My 300 hp minimum guess was in reference to your initial 16' projection and its load. If you cut back to 12' and minimize your load, then your 150 hp could work if you keep it light. Be aware that the Glen-L you linked above, is not built or braced enough for such an engine. I've not seen those plan...
by Deano
Mon Mar 20, 2017 4:10 pm
Forum: Aircraft Power Only
Topic: 220 bogs and loses power at wide open throttle.
Replies: 26
Views: 692

Re: 220 bogs and loses power at wide open throttle.

Have you run it, bogged it out and shut it down in one motion, and then read the plugs? Doing so should confirm or deny your flooding theory. It sounds like, and odds would seem better it isn't getting enough gas. Are you sure the float level is set correctly? Sure your gauge is accurate? Holleys ar...
by Deano
Sun Mar 19, 2017 9:49 pm
Forum: Airboat Talk
Topic: Injured Florida State Trooper
Replies: 6
Views: 656

Re: Injured Florida State Trooper

Prayers sent that all those involved may arrive at the best possible outcome.
by Deano
Sun Mar 19, 2017 8:21 pm
Forum: Automotive Power Only
Topic: MTS VT59 Shaft Rocker System with ARP Studs Clearance Issue
Replies: 21
Views: 720

Re: MTS VT59 Shaft Rocker System with ARP Studs Clearance Issue

The ARP black oxide (8740 Chromoly) is what you want. I didn't go dig any out to measure them, but note that you're after three different lengths. Ten medium ones for the inside rows, and Two shorter for the ends and Eight long ones for the remainder of the outside rows. In other words, be aware the...
by Deano
Sun Mar 19, 2017 12:21 pm
Forum: Aircraft Power Only
Topic: 220 bogs and loses power at wide open throttle.
Replies: 26
Views: 692

Re: 220 bogs and loses power at wide open throttle.

Sounds like the prudent thing to do, and a safe bet to me.

I always like adding to the "Well, I know it's not that" list. :)
by Deano
Sun Mar 19, 2017 11:56 am
Forum: Automotive Power Only
Topic: MTS VT59 Shaft Rocker System with ARP Studs Clearance Issue
Replies: 21
Views: 720

Re: MTS VT59 Shaft Rocker System with ARP Studs Clearance Issue

I believe all that he was saying is that given that your rebuild is using the lower compression ratio, that head bolts will be sufficient. And that while studs may have been preferable, they are not mandatorily necessary for that level build. I kind of suspected that was grease on that stud . . . I ...
by Deano
Sun Mar 19, 2017 11:17 am
Forum: Aircraft Power Only
Topic: 220 bogs and loses power at wide open throttle.
Replies: 26
Views: 692

Re: 220 bogs and loses power at wide open throttle.

check your points gap......and coil may be weak x2 Beyond that, the general consensus seems to be #74 jets . . . http://southernairboat.com/phpBB3/search.php?keywords=%2B220+%2BHolley+%2B500+%2Bjets&terms=all&author=&sc=1&sf=all&sk=t&sd=d&sr=posts&st=0&ch=300&...
by Deano
Sun Mar 19, 2017 10:09 am
Forum: Aircraft Power Only
Topic: Need Help Alternator an Pulley 0435
Replies: 3
Views: 169

Re: Need Help Alternator an Pulley 0435

Good deal. :thumbleft:

You're in good hands . . .

. . . and without an Allstate Premium. :lol: :lol:
by Deano
Sun Mar 19, 2017 9:59 am
Forum: Automotive Power Only
Topic: MTS VT59 Shaft Rocker System with ARP Studs Clearance Issue
Replies: 21
Views: 720

Re: MTS VT59 Shaft Rocker System with ARP Studs Clearance Issue

Well, a couple of random thoughts/comments will not change what you've already determined, but if you wanted another mildly informed opinion that may be of little more than no value, I can help you out. :lol: First, you are to be commended for your photography skills, as all three pictures tell the ...
by Deano
Sat Mar 18, 2017 10:36 am
Forum: Aircraft Power Only
Topic: capacitor
Replies: 3
Views: 218

Re: capacitor

That middle one looks just like what OMC used on the old outboards.
by Deano
Sat Mar 18, 2017 10:32 am
Forum: Airboat Talk
Topic: OlfArt- Ken Johnson
Replies: 39
Views: 1862

Re: OlfArt- Ken Johnson

This is very sad news indeed. Ken was a great guy both on the board and otherwise.
He will definitely be missed. Prayers sent.
by Deano
Sat Mar 18, 2017 10:29 am
Forum: Aircraft Power Only
Topic: Need Help Alternator an Pulley 0435
Replies: 3
Views: 169

Re: Need Help Alternator an Pulley 0435

First couple to try that come to mind . . .

Norman Clay @Innovative Accessories
https://www.southernairboat.com/phpBB3/viewtopic.php?f=47&t=69530&p=674422
or
Dick Waters @ Air-Tec
http://www.airtecinc.us/airboat.html
by Deano
Tue Mar 14, 2017 5:56 pm
Forum: Airboat Tech
Topic: Plan design foar airboat France
Replies: 12
Views: 475

Re: Plan design foar airboat France

Glades Cat is correct on both counts.

There are no such plans available in the public domain, and 16' is a good sized airboat.

Probablement, au moins doubler votre estimation d’origine.
by Deano
Tue Mar 14, 2017 5:39 pm
Forum: Automotive Power Only
Topic: MTS VT59 Shaft Rocker System with ARP Studs Clearance Issue
Replies: 21
Views: 720

Re: MTS VT59 Shaft Rocker System with ARP Studs Clearance Issue

No questioning that makes sense, it wasn't something that occurred to me. I've used Harland Sharp, RAS, and some early MTS shaft systems and not had that issue. It wasn't something that I ever thought about before, but guess I never put studs in, AND shaft rockers on, an early block. :scratch: I hav...
by Deano
Sun Mar 12, 2017 6:27 pm
Forum: Automotive Power Only
Topic: MTS VT59 Shaft Rocker System with ARP Studs Clearance Issue
Replies: 21
Views: 720

Re: MTS VT59 Shaft Rocker System with ARP Studs Clearance Issue

That sounds like something is abnormal. I wouldn't want to shim them that far. Not only is that probably not preferable, but could be an issue if you already have pushrods and will only complicate VC clearance. Almost sounds like the wrong studs, but that seems more than unlikely from MTS. Did the m...
by Deano
Sun Mar 12, 2017 9:50 am
Forum: Automotive Power Only
Topic: 10.0:1 compression adding a blower optional?
Replies: 17
Views: 699

Re: 10.0:1 compression adding a blower optional?

My blower experience is limited, but from what I've seen and done, I would be inclined to purpose build another engine for the blower if that is an option. My assessment would be very similar to Swamphunter's friend in Tampa, in that lower compression will allow for more bang for the buck so to spea...
by Deano
Sun Mar 12, 2017 9:27 am
Forum: Airboat Talk
Topic: AAOF caretaker in fatal car accident.
Replies: 31
Views: 4644

Re: AAOF caretaker in fatal car accident.

It is a great man that leaves such a legacy, to be thought of so often even long after his passing.

Slide easy, my unmet friend . . . There is no questioning the example

you set for making the world a better place. God Bless you and yours.

Go to advanced search