First Airboat Help!!

Best airboat discussion on the internet.
OJMonty2
Southern Airboat Member
Posts: 2
Joined: Thu May 18, 2017 10:21 am

First Airboat Help!!

Postby OJMonty2 » Thu May 18, 2017 10:47 am

What's up guys!!! I'm completely new to this forum but let me say you guys are awesome!! I've been reading these forums for weeks and have learned a lot!! Anyhow I'm looking for advice from some of the more experienced boaters.

I'm trying to get into my first boat and want to know what you all recommend. I'm looking at smaller hulls with 4 cyl aircraft engine. I only need it to hold 2 to 3 people but would like a boat that can run dry. I've seen a lot of boats for sale with Lycoming's and want to know if you believe a 4 cyl aircraft engine has enough power for what I'm looking for. My grandfather is an old timer in the everglades. He's been out of the glades for quite a while, but believes the only way to go is an 0540. While I'd love to get an 0540 that's a bit more than I'm looking to spend (got a wedding coming up and the fiancé isn't thrilled about the airboat, but i'm 10 minutes from the glades lol).

Any how any advice you guys can give would be much appreciated!! I'm hoping to be purchasing a boat within a month and looking forward to being able to ride with some of you.

BTW if anyone knows somebody looking to sell a boat I'm looking!

User avatar
Junker
Site Supporter - IV
Site Supporter - IV
Posts: 352
Joined: Mon Apr 25, 2011 10:11 pm
Location: Lake Co,FL

Re: First Airboat Help!!

Postby Junker » Thu May 18, 2017 3:04 pm

Buy the 0540 and pass on the wedding.............
14 x 8 Hamant
383 - 2.38 Stinger
80" 3 Blade
Stainless rigged

Scarecrow
Site Supporter - II
Site Supporter - II
Posts: 1245
Joined: Sun Feb 05, 2012 12:01 pm
Location: west palm beach to sebring

Re: First Airboat Help!!

Postby Scarecrow » Thu May 18, 2017 4:22 pm

Compared to a wife an airboat is cheap.

Krahammer
Southern Airboat Member
Posts: 61
Joined: Fri May 06, 2016 11:18 am
Location: Jupiter, FL

Re: First Airboat Help!!

Postby Krahammer » Thu May 18, 2017 4:39 pm

I agree. I bought a boat the same day that my divorce became final. My boat has an occasional problem but she never argues with me and does not contain when I am out late gigging, and has never threatened to leave me because I rode another boat.

User avatar
Scotty1
Site Supporter - I
Site Supporter - I
Posts: 256
Joined: Mon Sep 05, 2011 1:02 pm
Location: ft white fla and former Naples fla cracker for 48 years

Re: First Airboat Help!!

Postby Scotty1 » Thu May 18, 2017 5:22 pm

:rebel: DEPENDS ON WHAT SHE LOOKS LIKE :rebel: BOATS AINT CHEAP


OJMonty2
Southern Airboat Member
Posts: 2
Joined: Thu May 18, 2017 10:21 am

Re: First Airboat Help!!

Postby OJMonty2 » Thu May 18, 2017 5:30 pm

LOL....Thanks for the replies guys!

Any advice on if a 4cyl a/c engine has enough power for a small 11-12ft hull?

Swamp Thang
Southern Airboat Member
Posts: 26
Joined: Mon Jul 25, 2016 9:32 pm
Location: Hudson and Inverness Fl.

Re: First Airboat Help!!

Postby Swamp Thang » Thu May 18, 2017 7:19 pm

Just don't tell her how much it really cost and you'll be fine, what she don't know won't hurt her lol
A 4 cylinder on a small light hull will run dry but 3 people is pushing it. Seems the general consensus around here is it takes about a 1 hp to 4 pound ratio to run dry with confidence assuming the bottom of the hull is good/straight so basically a 200 hp engine will push an 800 pound rig, 400 hp will push a 1600 pound rig and so on no matter how many cylinders. The best advise I can give you is to buy as much boat and motor as you can reasonably afford, don't be in a rush and settle for less than you really want or need... save up a little more while doing research on here and talking to as many airboaters as you can will save you a lot of time and money in the long run. The classified's on here are your best source to find a nice boat what ever type you decide on.

User avatar
Rick McC.
Southern Airboat Member
Posts: 81
Joined: Wed Jan 11, 2017 10:14 pm
Location: Weeki Wachee, Fl

Re: First Airboat Help!!

Postby Rick McC. » Fri May 19, 2017 10:52 pm

Swamp Thang wrote:Just don't tell her how much it really cost and you'll be fine, what she don't know won't hurt her lol
A 4 cylinder on a small light hull will run dry but 3 people is pushing it. Seems the general consensus around here is it takes about a 1 hp to 4 pound ratio to run dry with confidence assuming the bottom of the hull is good/straight so basically a 200 hp engine will push an 800 pound rig, 400 hp will push a 1600 pound rig and so on no matter how many cylinders. The best advise I can give you is to buy as much boat and motor as you can reasonably afford, don't be in a rush and settle for less than you really want or need... save up a little more while doing research on here and talking to as many airboaters as you can will save you a lot of time and money in the long run. The classified's on here are your best source to find a nice boat what ever type you decide on.


Excellent advice!
"Sights are for the unenlightened."
Rick
http://guntipsandtalk.com

User avatar
THE NIGHT RIDER
Site Supporter - III
Site Supporter - III
Posts: 2308
Joined: Sun Mar 15, 2009 1:13 am
Location: COCOA / CANAVERAL GROVES

Re: First Airboat Help!!

Postby THE NIGHT RIDER » Sat May 20, 2017 10:13 am

Ur fist airboat is for learning ,learning to drive ,learning where u can and cannot go ,learning u have no brakes ,so id say a 4banger is a great start ,u can always upgrade to that 540 once you have alot of stick time

Sent from my SM-G935P using Southern Airboat mobile app powered by Tapatalk
!!! IM THE REAL NIGHT RIDER B!TCH !!! !!! AND A PROUD TO BE IN THE DIAMONDBACK FAMILY !!!!

Warden
Southern Airboat Member
Posts: 19
Joined: Sun Apr 02, 2017 9:20 pm

Re: First Airboat Help!!

Postby Warden » Sat May 20, 2017 10:23 pm

Well , im in the same boat as u ! Lol. , just bought my first airboat , its a gfx 11' with a 0320 150hp ,,,with a 6 blade warp , i need it to run dry , and up a hill to get outta my creek , wanted more power , but. $$$ and i have like only 20 min stick time in a v8 car motor diamondback. The engine i built for the owner , it was mid 600s hp. Small block chev , i loved the thing , But it did not feel over powered by any means ! I have not driven my 0320 powerd boat as of yet , im sure it wont have enough power , but i am hoping for the best , if anyone here has an opinion as to the o320 on a gfx glass boat and the 6 blade , i would love to hear the bad news ? Please chime in , i will ansewr your question in detail bout this time next week ! i figuer if i like the boat and if where i intend to use it works out , then this winter i will head south and get a newer boat and lots off hp ! Got to start somewhere ! Im stressin more over the prop ! The seller tells me it dont whine ,, i thik hes lying from what i see of warp drive 6 blades on video ,,, i really hope someone can give me feed bach on here bout it ?? Your post was the exact thing i was going to ask on here lol. ! Good luck , w

Gary S
Site Supporter - I
Site Supporter - I
Posts: 1326
Joined: Wed Mar 03, 2010 3:30 pm
Location: Redlands

Re: First Airboat Help!!

Postby Gary S » Sun May 21, 2017 6:13 am

Your buying a boat and you haven't heard it run? Keep it light and it might surprise you.

Warden
Southern Airboat Member
Posts: 19
Joined: Sun Apr 02, 2017 9:20 pm

Re: First Airboat Help!!

Postby Warden » Sun May 21, 2017 7:50 am

Thats correct , site unseen except for pics & the sellers word , he has serious health issues and is not able to do much , and its too far for me to get there with work scedule , its also "freshley majored and 15% more hp then stock " so he says ,, im not sure if that gain is even possible with these engines , i know absolutely nota bout these or any other aircraft engines , , I do build race engines for a living tho , car motors i know well ! Boat apears to be in great shape from pics ( exceptional ) And it was dirt cheap , i need to begin somwhere , i wanted an airboat for 30 years , my engine shop is rite on a creek that is 300 feet wide and over 30 miles long of great fishing and hunting ! Been using a 6x6 amphib , talk about a slow ride up stream ! Thank u fo answering w.

User avatar
Deano
Site Supporter - V
Site Supporter - V
Posts: 4115
Joined: Thu Jan 06, 2005 11:16 am
Location: Inverness, FL

Re: First Airboat Help!!

Postby Deano » Sun May 21, 2017 8:49 am

I'm hoping that you didn't find it on Craigslist. That just sounds generically suspect.

There is always the possibility of getting someone close enough to check it out for you, if not with you.
Somebody close(r) my be able to at least go check it out and offer an educated opinion.

Might cost ya a twelve pack and/or a couple bucks, but it's hard to imagine that not being money well spent.
"The suppression of uncomfortable ideas may be common in religion and politics,
but it is not the path to knowledge; it has no place in the endeavor of science."
- Carl Sagan

Warden
Southern Airboat Member
Posts: 19
Joined: Sun Apr 02, 2017 9:20 pm

Re: First Airboat Help!!

Postby Warden » Sun May 21, 2017 10:09 am

Ehh ,,, real cheap ... not craigs , the guy is real as is the
Boat ... hes just really sick ... i dont want to bug him
I have a shop full of 3.8 supercharged V6s that make 340ftlbs at 2800rpm ... if its that bad
One of those can find its way into the boat pretty quickly ... they are fairly light weight also
But i would love the 0320 to work out ... that will be my first goal ! W

Uhairball
Southern Airboat Member
Posts: 274
Joined: Mon Aug 15, 2011 6:31 am
Location: Inverness, FL

Re: First Airboat Help!!

Postby Uhairball » Sun May 21, 2017 7:33 pm

This sounds VERY suspicious.
Not wanting to see ya get ripped off, tell us this, and maybe somebody here can verify boat is
actually there and in the condition stated.
What city and state are you located?
What city and state is the boat located?
Maybe a pic or two of the boat will make it identifiable..
Did you at least get a copy of the title with the SELLER's name on it?
If you browse through this website, you will find MANY people that have reported being ripped off by
individual sellers and dealers alike. Been there done that..

Warden
Southern Airboat Member
Posts: 19
Joined: Sun Apr 02, 2017 9:20 pm

Re: First Airboat Help!!

Postby Warden » Sun May 21, 2017 9:14 pm

How do u send pics on here ? , i appreciate your concern , I verified there actually being a boat at the
Location,, im from New york state (NOT City ) , its cash on pic up , so not sure what the point would be
Toying with me , i guess its possible tho , i wouldnt be my first pic of people to do that 2 ..
lol ...Nope ! I hope a 0320 150 is at least able to teach and show me a fair attempt at airboat fun ,
That and every video ( not many out there ) i can find with a Warp 6 sounds like my X wifes hi piched voice going rite thru me .... ! Reading posts on this site has been helpful , i have allot to learn ...
I did find today that several of my engines have ended up on airboats .. although built for circletrack
And i will probably end up with something like that if i like this stuff ! I ran the reg , its a 2002
GFX , BTW , im thinkin it would be more likely to have a sour engine if anything , and that
Would suck , but nothing earth shattering if thats the case ! Maybe i can pm u pics ... im kinda retarded on the commputer stuff ! Thx Warden

boatair
Site Supporter - VII
Site Supporter - VII
Posts: 174
Joined: Tue Jan 11, 2011 5:34 pm
Location: Vero Beach, FL.

Re: First Airboat Help!!

Postby boatair » Sun May 21, 2017 10:27 pm

Warden wrote:How do u send pics on here ? , i appreciate your concern , I verified there actually being a boat at the
Location,, im from New york state (NOT City ) , its cash on pic up , so not sure what the point would be
Toying with me , i guess its possible tho , i wouldnt be my first pic of people to do that 2 ..
lol ...Nope ! I hope a 0320 150 is at least able to teach and show me a fair attempt at airboat fun ,
That and every video ( not many out there ) i can find with a Warp 6 sounds like my X wifes hi piched voice going rite thru me .... ! Reading posts on this site has been helpful , i have allot to learn ...
I did find today that several of my engines have ended up on airboats .. although built for circletrack
And i will probably end up with something like that if i like this stuff ! I ran the reg , its a 2002
GFX , BTW , im thinkin it would be more likely to have a sour engine if anything , and that
Would suck , but nothing earth shattering if thats the case ! Maybe i can pm u pics ... im kinda retarded on the commputer stuff ! Thx Warden

BTW GFX is Gilileo & Sons or Gilileo Fiberglass Products

Gary S
Site Supporter - I
Site Supporter - I
Posts: 1326
Joined: Wed Mar 03, 2010 3:30 pm
Location: Redlands

Re: First Airboat Help!!

Postby Gary S » Mon May 22, 2017 7:56 am

Did he say it was a 150? Could be 160. 15% sounds a little high. The warp drive is going to sound like a weed eater no getting around that. But if you get it cheap enough and it is what he says it is, you can change the prop. Sounds like your knowledgeable around engines to know if something is running correct.

Warden
Southern Airboat Member
Posts: 19
Joined: Sun Apr 02, 2017 9:20 pm

Re: First Airboat Help!!

Postby Warden » Tue May 23, 2017 12:29 am

The tag on the engine says 150 , im pretty sure the owner knows less then me about airboats ,, and that is pretty much nothing ! I was going to blow $30k on a used diamondback that was on ebay, but i figured i will just get this little galileo and see how me and the dog get along with it , its not enough $$ to worry bout it , maybe its junk , maybe i will get lucky ? I have to begin somewhere ! In my area , there are NO airboats , ZERO , not sure of the reason , perhaps i will find out ! Im sure the kyakers will be proud of me ! W

User avatar
kwanjangnihm
Site Supporter - IV
Site Supporter - IV
Posts: 1218
Joined: Sat Mar 30, 2013 8:23 pm
Location: Bartow FL

Re: First Airboat Help!!

Postby kwanjangnihm » Tue May 23, 2017 5:13 am

Posting photos of airboat for warden! :thumbleft:

Image
Image
Image
" I don't care who you are back in the world, you give away our position one more time, I'll bleed ya, real quiet. Leave ya here. Got that? "

User avatar
Deano
Site Supporter - V
Site Supporter - V
Posts: 4115
Joined: Thu Jan 06, 2005 11:16 am
Location: Inverness, FL

Re: First Airboat Help!!

Postby Deano » Tue May 23, 2017 8:18 am

Great Find !! .. Image
Looks like the Good Lord figured it was time you had an airboat. :thumbleft:

You are a guy who would be able to use these: ( right click on the link, then select "Save Target As... " )

http://www.southernairboat.com/pdf/aircraftengines/lycoming/320/H2AD/Lycoming_76_Overhaul.pdf
http://www.southernairboat.com/pdf/aircraftengines/lycoming/320/H2AD/Lycoming_O-320-H_IPC_PC-122.pdf
"The suppression of uncomfortable ideas may be common in religion and politics,
but it is not the path to knowledge; it has no place in the endeavor of science."
- Carl Sagan


Return to “Airboat Talk”

Who is online

Users browsing this forum: Bing [Bot], Google Adsense [Bot], kwanjangnihm, Yahoo [Bot] and 14 guests