Page 8 of 8

Re: Caddell's Build!

Posted: Mon Jul 04, 2016 9:47 am
by Deano
Hope you didn't have to go to far to get where the bank was a little closer to the water level. :shock:
Caddellwelding wrote:Yes sir got her out a couple of hours after I sunk her. Had her back on the river yesterday!
:thumbleft: I reckon you have more in common with a
bunch of us now, than you did last week ! :D :lol:

Re: Caddell's Build!

Posted: Mon Jul 04, 2016 11:10 am
by Caddellwelding
Thankfully my midget doesn't weigh much. Took us about 1 hour to get it on sandbar. Then bailed out water. But the 5 miles of pushing the boat back to the ramp really sucked!


Sent from my iPhone using Tapatalk

Re: Caddell's Build!

Posted: Mon Jul 04, 2016 5:24 pm
by Rollbar1
Caddellwelding wrote:Image Who wants to go airboatin! Lmao [FACE WITH TEARS OF JOY][FACE WITH TEARS OF JOY]
Sent from my iPhone using Tapatalk



What caused it?

Re: Caddell's Build!

Posted: Tue Jul 05, 2016 6:33 am
by dick2256
What kind of a gauge are you using that shows your speed?
I want to buy one of those

Re: Caddell's Build!

Posted: Tue Jul 05, 2016 8:55 am
by Rollbar1
dick2256 wrote:What kind of a gauge are you using that shows your speed?
I want to buy one of those


It is a app on the cell phone/app store. Works great, I have one I use for my Jeep since the speedo is off when a cop is behind me. :toothy7:

Re: Caddell's Build!

Posted: Tue Jul 05, 2016 4:03 pm
by Caddellwelding
Speedometer. Works great. Shows time of trip, how far, avg speed and top speed for that trip. It's free and works good!


Sent from my iPhone using Tapatalk

Re: Caddell's Build!

Posted: Mon Jul 11, 2016 11:33 pm
by Caddellwelding
ImageCaptain for the day!


Sent from my iPhone using Tapatalk

Re: Caddell's Build!

Posted: Fri Jul 15, 2016 11:00 pm
by Caddellwelding
Got my transom cut and bent. Ready to cut out old one. Then I'll have to chop rudders, add micro anchor then off to the water!


Sent from my iPhone using Tapatalk

Re: Caddell's Build!

Posted: Tue Jul 26, 2016 10:05 pm
by Caddellwelding
O-320 will be ready in 3 weeks! Let the rebuilding begin!


Sent from my iPhone using Tapatalk

Re: Caddell's Build!

Posted: Sun Aug 07, 2016 4:26 pm
by Caddellwelding
Where can I buy the hull railing from?

Re: Caddell's Build!

Posted: Sun Aug 07, 2016 5:16 pm
by Caddellwelding
Where can I buy the gunnel rail?


Sent from my iPhone using Tapatalk

Re: Caddell's Build!

Posted: Sun Aug 07, 2016 5:26 pm
by Ungashick
Caddellwelding wrote:Where can I buy the gunnel rail?


Sent from my iPhone using Tapatalk


Pierce Aluminum

Re: Caddell's Build!

Posted: Sun Aug 07, 2016 5:27 pm
by Caddellwelding
Where they out of? Any info on them.


Sent from my iPhone using Tapatalk

Re: Caddell's Build!

Posted: Sun Aug 07, 2016 7:51 pm
by Caddellwelding
Found them. Thank you!


Sent from my iPhone using Tapatalk

Re: Caddell's Build!

Posted: Sun Aug 07, 2016 11:54 pm
by Ungashick
Will this thing run dry with a 50hp on it?

Re: Caddell's Build!

Posted: Sun Aug 07, 2016 11:58 pm
by Caddellwelding
Ungashick wrote:Will this thing run dry with a 50hp on it?
Mine or did you try to upload a pic? Mine will move on dry ground when I have a fresh coat of quickslick.


Sent from my iPhone using Tapatalk

Re: Caddell's Build!

Posted: Thu Mar 16, 2017 11:12 pm
by Caddellwelding
Image Starting over!


Sent from my iPhone using Tapatalk

Re: Caddell's Build!

Posted: Sat Mar 18, 2017 9:47 pm
by Caddellwelding
ImageImageImage


Sent from my iPhone using Tapatalk