Ron's EcoCruse 127

How to soup'em up...a little less moderated...medium skin thickness required!
chuckitt@earthlink.net
Site Supporter - IV
Site Supporter - IV
Posts: 1670
Joined: Mon Apr 03, 2006 8:43 pm
Contact:

Ron's EcoCruse 127

Postby chuckitt@earthlink.net » Tue Jan 29, 2013 7:48 am

The EcoCruze 127 Airboat
Hull: New Style Rivermaster hand laid by Marty Bray, 12 ft X 7 ft 6 inch.
Metalworks: Stainless Steel, rear steer single, front double, Pancake Cage by Ron Paxson.
Engine: 2011 Chevy Cruze LUJ 1.4L Turbo ( 1364cc ) GM ECM controlled
Emissions: Catilitic Converter and EVAP System
Reduction: Century Drives Eco 2 to 1 Belt
Prop: Water Walker 3 Blade Cypress 68 inch
Steering: Teleflex Cable with Airboat Inc 40 X 20 Foam Filled Rudders
Seat Covers: Lynn's Stitch Shop
Performance: 179 HP at 5000 rpm and 20 psi boost.
Speed: 68 mph in 400 ft.

At Little Nichols, i raced against Donny Lovetts 0-540 SV and we were dead even at the finish line. This small engine turned out to be a lot more than we expected.
We expect this boat to exceed 12 miles per gal when cruzing 28 mph.
http://www.youtube.com/watch?v=Wqsg33TgttQ
Image

User avatar
Tony480
Site Supporter - I
Site Supporter - I
Posts: 5275
Joined: Sun Sep 10, 2006 5:52 pm
Location: lake county

Re: Ron's EcoCruse 127

Postby Tony480 » Tue Jan 29, 2013 8:06 am

68 MPH IN 400'??? Who had the radar? That seems far fetched....about like a carb making your rudders fall off.

chuckitt@earthlink.net
Site Supporter - IV
Site Supporter - IV
Posts: 1670
Joined: Mon Apr 03, 2006 8:43 pm
Contact:

Re: Ron's EcoCruse 127

Postby chuckitt@earthlink.net » Tue Jan 29, 2013 8:23 am

Hey Tony, That is what the GPS read.
The carb is only part of the problem. I haven't had much time to answer his post as it will take a few pages to lay out everything that has happened to that boat. Many things will come to light.
Chuck

BlowInIt
Site Supporter - II
Site Supporter - II
Posts: 1627
Joined: Tue Jun 23, 2009 7:07 pm
Location: Melbourne

Re: Ron's EcoCruse 127

Postby BlowInIt » Tue Jan 29, 2013 8:29 am

68mph in 400' that thing is ready to race!

cntry141iq
Site Supporter - VI
Site Supporter - VI
Posts: 10136
Joined: Fri Sep 03, 2004 9:31 pm
Location: bradenton florida
Contact:

Re: Ron's EcoCruse 127

Postby cntry141iq » Tue Jan 29, 2013 8:38 am

:violent3: :happy1: :coffee2:
Don't waste your time ... it is the only thing you can't get more of
.. if it accidentally looks like I gave advice please ignore it .. and notify me immediately


chuckitt@earthlink.net
Site Supporter - IV
Site Supporter - IV
Posts: 1670
Joined: Mon Apr 03, 2006 8:43 pm
Contact:

Re: Ron's EcoCruse 127

Postby chuckitt@earthlink.net » Tue Jan 29, 2013 8:56 am

I wish i had the funds to put one on my Scorpy Hull. Maybe when the new race track gets built in Sumter County.
Chuck

User avatar
skinny99
Site Supporter - II
Site Supporter - II
Posts: 1182
Joined: Sun Jun 13, 2010 8:20 pm
Location: Deltona, FL

Re: Ron's EcoCruse 127

Postby skinny99 » Tue Jan 29, 2013 9:01 am

Good looking little boat, prob fun as he!! to drive. One question is there a reason you chose the 2:1 box over a higher ratio?
Successful people do what others won't or can't!

User avatar
Tony480
Site Supporter - I
Site Supporter - I
Posts: 5275
Joined: Sun Sep 10, 2006 5:52 pm
Location: lake county

Re: Ron's EcoCruse 127

Postby Tony480 » Tue Jan 29, 2013 9:08 am

68 mph.Lmao!! :lol: Be lucky if it would do that being pulled behind your truck. That's faster than a lot of boats at the races. Must be a carbon fiber rivermaster with chrome moly polished rigging and a 300 shot on it.

chuckitt@earthlink.net
Site Supporter - IV
Site Supporter - IV
Posts: 1670
Joined: Mon Apr 03, 2006 8:43 pm
Contact:

Re: Ron's EcoCruse 127

Postby chuckitt@earthlink.net » Tue Jan 29, 2013 9:15 am

Hey Skinny, This belt drive by Centry Drives is the only drive that will bolt to the engine. It these engines start selling, Centry may do us a 2.4 to 1 or something close to that.
We will do an emission test to see if we can pass EPA standards and then we will get them certified. Just looking to the future and clean up the air some.
Chuck

User avatar
skinny99
Site Supporter - II
Site Supporter - II
Posts: 1182
Joined: Sun Jun 13, 2010 8:20 pm
Location: Deltona, FL

Re: Ron's EcoCruse 127

Postby skinny99 » Tue Jan 29, 2013 9:19 am

chuckitt@earthlink.net wrote:Hey Skinny, This belt drive by Centry Drives is the only drive that will bolt to the engine. It these engines start selling, Centry may do us a 2.4 to 1 or something close to that.
We will do an emission test to see if we can pass EPA standards and then we will get them certified. Just looking to the future and clean up the air some.
Chuck

Gotcha. Is it making boost at 3200-3300 RPM's? How much?
Successful people do what others won't or can't!

chuckitt@earthlink.net
Site Supporter - IV
Site Supporter - IV
Posts: 1670
Joined: Mon Apr 03, 2006 8:43 pm
Contact:

Re: Ron's EcoCruse 127

Postby chuckitt@earthlink.net » Tue Jan 29, 2013 9:23 am

Hey Tony, in the video, Ron would not hold the throttle down over 300 ft. Get Donny Lovett's phone # and call him. He could not beleave it ran down his 0-540.
Chuck

chuckitt@earthlink.net
Site Supporter - IV
Site Supporter - IV
Posts: 1670
Joined: Mon Apr 03, 2006 8:43 pm
Contact:

Re: Ron's EcoCruse 127

Postby chuckitt@earthlink.net » Tue Jan 29, 2013 9:29 am

On the datalog it showed the positive boost just starting at 3200 rpm. At 5000 it was making 20 psi boost. We will work on the tune to get at least 22 psi boost. The boat launches with the help of VVT getting Max Torque at 2000 rpm.
Chuck

User avatar
ptr34
Site Supporter - II
Site Supporter - II
Posts: 2836
Joined: Wed Oct 04, 2006 5:29 pm
Location: plant city

Re: Ron's EcoCruse 127

Postby ptr34 » Tue Jan 29, 2013 9:41 am

in the video it dont look that fast was that a full throttle pass till u let out ???
if u don't run dry .then should have gotten a bassboat
tons videos on YouTube ptr34

chuckitt@earthlink.net
Site Supporter - IV
Site Supporter - IV
Posts: 1670
Joined: Mon Apr 03, 2006 8:43 pm
Contact:

Re: Ron's EcoCruse 127

Postby chuckitt@earthlink.net » Tue Jan 29, 2013 9:49 am

In the video, Ron was driving and it was not a full throttle pass. He want hold it open.

BlowInIt
Site Supporter - II
Site Supporter - II
Posts: 1627
Joined: Tue Jun 23, 2009 7:07 pm
Location: Melbourne

Re: Ron's EcoCruse 127

Postby BlowInIt » Tue Jan 29, 2013 10:21 am

12mpg seems very far fetched too. Mikes little black fiberglass ecotech is only getting 5.5mpg running sround kissimme how in the hell is this boat gona get over 12mpg?

BlowInIt
Site Supporter - II
Site Supporter - II
Posts: 1627
Joined: Tue Jun 23, 2009 7:07 pm
Location: Melbourne

Re: Ron's EcoCruse 127

Postby BlowInIt » Tue Jan 29, 2013 10:25 am

Boat does look good, but those #s ant even close to realistic. Sorry

Quick Draw
Site Supporter - II
Site Supporter - II
Posts: 605
Joined: Mon Jul 09, 2012 4:31 pm
Location: Plam Beach County

Re: Ron's EcoCruse 127

Postby Quick Draw » Tue Jan 29, 2013 10:38 am

I'm not sure if my DD sc 480 will run 68 in 400ft???? :lol: man that's fast for a big boat like that.

User avatar
John C
Site Supporter - V
Site Supporter - V
Posts: 2883
Joined: Thu Jan 26, 2006 9:43 pm
Location: Palm City

Re: Ron's EcoCruse 127

Postby John C » Tue Jan 29, 2013 11:19 am

Hey Chuck, you need to let someone drive that boat that will keep their foot in it. You can hear him let off in the video. I'm sure a lot of folks want to see what these little boats can really do.

User avatar
plumcrazy
Site Supporter - V
Site Supporter - V
Posts: 8695
Joined: Thu Apr 06, 2006 10:10 am
Location: avon park

Re: Ron's EcoCruse 127

Postby plumcrazy » Tue Jan 29, 2013 11:51 am

BlowInIt wrote:Boat does look good, but those #s ant even close to realistic. Sorry

/i have driven one of these boats and lets just say that reality is a case of perception ... dont under estamate this technology is pretty amazing to me , i really see myself having one of these fun little boats soon

BlowInIt
Site Supporter - II
Site Supporter - II
Posts: 1627
Joined: Tue Jun 23, 2009 7:07 pm
Location: Melbourne

Re: Ron's EcoCruse 127

Postby BlowInIt » Tue Jan 29, 2013 11:58 am

Hey I agree, and honestly 5.5mpg is awsome for a airboat, but to say this one will get 12mpg and does 68mph in 400' is just bs in my book. Just calling it like I see it.

C1gator
Site Supporter - II
Site Supporter - II
Posts: 2245
Joined: Mon Jan 07, 2008 8:01 pm
Location: Williston, Florida

Re: Ron's EcoCruse 127

Postby C1gator » Tue Jan 29, 2013 12:59 pm

I have seen this boat in person, Never seen it run on the river, just seen the boat at the shop....I have to say that the work and the attention to detail that went into this build is very clean and very impressive...Congratulations to Ron and all the folks at AIRBOAT PRO'S on this build....I am with you plum, I want one of these little rascals.....

chuckitt@earthlink.net
Site Supporter - IV
Site Supporter - IV
Posts: 1670
Joined: Mon Apr 03, 2006 8:43 pm
Contact:

Re: Ron's EcoCruse 127

Postby chuckitt@earthlink.net » Tue Jan 29, 2013 1:08 pm

Hey John C, good to here from you. I drove the boat at WOT with the GPS and got out of the throttle at the measured 400 ft. Ron didn't do a video of that run.
I said " over 12 miles per gal at 28 miles per hr" . Mikes was average including running hills and marsh.
Chuck

Davie GSO480
Site Supporter - IV
Site Supporter - IV
Posts: 822
Joined: Wed Jul 20, 2005 8:48 pm
Location: Davie Florida

Re: Ron's EcoCruse 127

Postby Davie GSO480 » Tue Jan 29, 2013 1:18 pm

Ill tell ya.........there's something to this turbo gas engine stuff..
Just got my wiffy a 2013 Ford Escape, it powered by a ECOBOOST 1.6-L
Its over 188 hp, with a 6 speed trane....and at 60mph.... it gets 31 MPG..........33 at 55mph, at 80 on cruise it got 27

They make a 2-L, its like 238hp.......same milage, and can tow 3500 pounds....
Crazy
Proud member of the Airboat Association of Florida.
A Miami Landmark sense 1951
http://www.aaof.com

User avatar
ptr34
Site Supporter - II
Site Supporter - II
Posts: 2836
Joined: Wed Oct 04, 2006 5:29 pm
Location: plant city

Re: Ron's EcoCruse 127

Postby ptr34 » Tue Jan 29, 2013 1:52 pm

it should do over 80 topend.
if u don't run dry .then should have gotten a bassboat
tons videos on YouTube ptr34

User avatar
Tony480
Site Supporter - I
Site Supporter - I
Posts: 5275
Joined: Sun Sep 10, 2006 5:52 pm
Location: lake county

Re: Ron's EcoCruse 127

Postby Tony480 » Tue Jan 29, 2013 1:56 pm

Hell probally 100 with whatever gps there using. And I don't care if you cruised at 5 mph or 28 that boat will never get 28 mpg. You must have been smoking that good shiat.


Return to “High Performance Talk”

Who is online

Users browsing this forum: No registered users and 2 guests