powder coating

A general, non-powerplant specific, discussion on airboat technology, ie., hulls, rigging, polymer, etc..
User avatar
john1edwards
Site Supporter - I
Site Supporter - I
Posts: 714
Joined: Wed Jul 29, 2009 11:46 am
Location: Polk City

powder coating

Postby john1edwards » Thu Nov 17, 2016 6:55 pm

Does anyone recomend a place in or close to Lakeland fl to powder coat a grass rake.

Thanks
Just an Orange Engine, Nothing Fancy . Proud to be an American

SWAMPHUNTER45
Site Supporter - III
Site Supporter - III
Posts: 2026
Joined: Thu Nov 21, 2013 11:38 am
Location: Naturecoast, Florida

Re: powder coating

Postby SWAMPHUNTER45 » Fri Nov 18, 2016 7:07 am

Just an FYI

I used Brothers Powder Coating in New Port Richey and they did an awesome job for me and the coating held up. They were a little finicky to deal with but in hind sight they know their process and products and were trying to explain which color and materials are best. I respect that and the quality of their work speaks for itself. They also have a large oven so that's something to remember if your doing large items.

On another occasion I used All American Powder Coating in Lutz and it was a freaking nightmare! The cost was thru the roof and it did not hold up. Their coating was super thin and it wasn't 3 months and every piece they did for me looked like crap.

http://www.brotherspowdercoating.com/

Brothers has the SWAMPHUNTER45 seal of approval!

User avatar
scottyroll
Site Supporter - I
Site Supporter - I
Posts: 879
Joined: Tue Mar 10, 2009 8:19 pm
Location: JAX/Ocala
Contact:

Re: powder coating

Postby scottyroll » Fri Nov 18, 2016 8:02 am

Here you go:

http://advancedcustompowdercoating.com/

They did my whole rigging and did a fine job.

They are about 15 miles from Lakeland located over in Winter Haven.
:Scotty-Roll:
FLAwless

14ft Laser/6.0 LQ4/2.37 Rotator/3 Blade "K"

E.C.Butler Welding
Southern Airboat Member
Posts: 5
Joined: Sat Jul 20, 2013 2:05 pm

Re: powder coating

Postby E.C.Butler Welding » Sun Nov 27, 2016 8:55 am

Pops Painting on Drain Field Road in Lakeland Can Do it, he has a huge powder coating booth, he can do all the metal work and a trailer at the same time, if you need all of it done ,and he does great work.


Return to “Airboat Tech”

Who is online

Users browsing this forum: Yahoo [Bot] and 5 guests