• If you log in, the ads disappear in the forum and gallery. If you need help logging in or getting registered, send request to: webmaster@southernairboat.com
carbon hybrid step hull
HAMMERHEAD

carbon hybrid step hull

106 lb. Carbon hybrid infused phillips step hull I built not bought! I may by one if I thought anyone could build one anywhere near the quality!
I DONT THINK ANYONE WAS HATEN ON ME I ASKED A QUESTION AND THEY THINK IM HATEN ON THEM. THANKS FOR THE COMPLIMENT KR23
 
Take a page from the PREDATOR haters make motivators I worked there along time and only remember weighting his race boat out if mold no trim deck lid or primer on bottom at around 190 lbs so you are way ahead of him I always thought they could be lighter good work man
 
Thanks woods and water! I can build a 125 lb. S glass boat that is strong enough for a race hull. Your boats are looking good as well
 
There is more material over the stringers than most ride boats. This particular boat has 3 layers over them and one is tied into the bottom layer of the boat and 2 over the stringers and core under the final layer on the inside of the boat. As well the stringer system is all one single unit so when your motor tourqes it will not lift one one outside stringer. As well I take extra time to be sure the stringers are cut to fit the bottom of the boat perfectly as well as abutting the step and trnsom and the deck around the stringers, so there is no void between the two. I think the stringers are the least concern of this boat. It is very rigid. My biggest concern is running into something and breaking it or puncturing it.
 

Media information

Category
Member Galleries
Added by
HAMMERHEAD
Date added
View count
1,978
Comment count
9
Rating
5.00 star(s) 5 ratings

Share this media

Back
Top