Search results

Any recommendations on someone specializing in Rotax motors?

Anything going on a boat ride in Brevard County Thursday or Friday? looking to go for a ride

Ive recently seen a lot of different options for portable jump boxes. Just wondering which ones are worth a shit? I tried one from one of the local parts stores and I was not impressed to say the least.

Anyone have a dd prop. Pipedog had a problem and needs prop in gardeners marsh.

Looking for somebody who has glow whips

Looks like there done. Anybody else get a letter?

Anything better out there? I remember vagley something about atf and acetone or was it antifreeze? What ratio do you mix the two? Thanks

Can anyone educate me on the easiest way to cut .035 stainless sheet? Need to cut 2x2 ft squares for a side job and was wondering what the best method would be. Thanks Birddog247

Somebody here a while back claim they were a generator mechanic just want to know who that person was if anybody can throw me some info I'm in South Florida thanks

A while back There was someone on hear advertising custom built fuel cells. Anybody know anyone? Thanks

I have a very similar setup to yours and asked the same questions when I built it. I was referred to Alan @ s&s performance carburater which provided good results. I went from not being able to break free on dry with and eldabrock to running wherever I wanted with a 670 cfm holly. Not sure what...

Is anybody gonna be riding this Friday the 3rd? Me and a buddy heading up to ride the marsh. Will be at the bus around 10 or so if anybody wants to join us.

WHEN I GROW UP I WANNA BE JUST LIKE YOU! HAVE A GOOD DAY MY FRIEND.

What are the dates for the lake cleanup in April?

Long Day

Thinking about trying something different. Anybody have any experience in this area or is anybody riding there this weekend. Like to check it out because I own some property nearby.

https://m.youtube.com/watch?v=hKWmFWRVLlU It all makes sense now!

http://www.flyingmag.com/aircraft/continental-introduces-310-hp-diesel-v6?cmpid=enews073014&spPodID=030&spMailingID=21204144&spUserID=MzU4MjcwNDE4NTQS1&spJobID=361756951&spReportId=MzYxNzU2OTUxS0

I think i may have already answered my own question but thought i might run it by the experts. My current set-up on a 12 ft hull is a stock 350 crate with a 2:1 box turning 4500 with an 80 inch ngr. Hasent skipped a beet since i built it 2 years ago. Ive run 93 octane since new and not until 2-3...

If anyone is looking for work this could be an oppurtunity for someone with experince in Aquatic Weed Control. Job Location is in Tampa Fl. Gulf Coast Lakes and Wetlands is a Florida based lake and environmental management services company. As an applicator you will primarily be responsible for...