Search results

I would like to add an oil filter kit to my 0-360 (narrow deck) to replace the screen between the mags. I looked on aircraftspruce but they want an arm and a leg for them. Does anyone know where I can get one at a reasonable price? Thanks, Brian

Does anyone know if the water level on Orange lake has come up any? What ramps are open? Are you able to get through cross creek? Any info would be appreciated. Thanks --Brian

is the airboat ban in aluchua county being enforced? any updates would be great, i was wanting to go frog gigging in orange lake. thanks, brian

are airboats allowed in paynes prairie? if so, where do people launch? is there any good running? any help would be appreciated. thanks--brian

i was thinking of meeting my father for an airboat ride on the st. johns (put in at hwy 50). can anyone tell me the conditions on the river...is the water up? thanks--brian

snake hunting in the glades http://www.miamiherald.com/2010/02/22/1493349_florida-to-hold-special-season.html

i have a 0-360 that is a great running engine but refuses to start in cold weather. when the temp falls below freezing i can crank and crank and have absolutely no fire....not even a putt. once the temp warms up a bit (upper 30's) it will fire right away. does anyone else have this problem...

i was cleaning the oil screen on my 0-360 and when i put everything back together it started leaking oil. the leak is where the temp probe seats inside the oil screen. i think i must have over tighten the nut holding the temp probe in place and now it does not seat correctly(guessing). how do...

i was thinking of running the lake hell-n-blazes area in a week or two but i am unfamiliar with it. is there any water in that area? if not, how about the hwy 50 area? any help would be appriciated. thanks

my rear main seal is leaking a little bit now. is this something that is going to get slowly worse or is it going to give out completely one day? how much would i expect to pay to get it fixed? thanks--brian

i have a bad spark plug wire and would like to replace the set. is there somewhere i can buy the harness with the wires already made up? i'm running a 0-360-A1A with a bendix mag S4LN-1219. I'm trying to get the plate that attaches to the mag and the wires to the plugs (i already have a...

i heard the camp was burned in the fire. personally, i'm glad it's gone. when it was first built, it was pretty nice. soon after, it became a big pile of trash with a camp house in the middle. tons of people brought stuff out there but no one took out the trash. i used to take people there...

i started my boat in the yard yesterday and noticed a puff of smoke coming from the exhaust (one side) every 15 seconds or so. i don't think this motor (0360) has done this before. i was running at a low rpm (<1000) and was woundering what would cause this? any ideas? THANKS!! --brian

i was looking to replace the plugs in my 0360 and was wondering what the gap is suppose to be. currently, i'm running champion D14 plugs and i'm planning on replacing with the same plugs. anyone know the proper gap? (i searched the old posts and got a little confused) side question...with the...

https://my.sfwmd.gov/pls/portal/docs/PAGE/PG_GRP_SFWMD_KOE/PORTLET_NORTHERNEVERGLADES/TAB2302093/LAKEO_WATERSHED_CONSTRUCTION_PROJ_PHASE_II_TECH_PLAN_EXEC_SUMMARY.PDF i haven't read all of this but if you scroll down to the picture on page 5, you'll understand the magnatude of the problem...

i've heard alot of talk about a/c engines living in florida having some pitting problems. i assume the more you run the engine the less likely this would happen. my question is: how long can you let an a/c engine sit before worrying about corrosion or other problems? thanks!! --brian

does anyone know if the m. rawings ramp at cross creek can be used? the last time i was there it was partially dry. is there any water left there? if it's dry, how dry...patches or fully dry? thanks!

i noticed a mild popping or misfiring of my 0-360 this morning. it sounds fine until i'm at full power and then pops a little. does anyone know what causes this? thanks! --brian

i was going to check out the microwave tower, but i don't really know where it is. somewhere in area 3A, right? anyone have the coordinates?

i've heard there is a regular shell gas station somewhere in the weston area that sells avgas. does anyone know anything about this? if so, please give me details. thanks --brian