• If you log in, the ads disappear in the forum and gallery. If you need help logging in or getting registered, send request to: webmaster@southernairboat.com

cam for dd 350 chevy

gotbait

Well-known member
I m do for a rebuild need to know what cam to use? been readin things on heredut havent seen a specific one.I turn a stump puller 2800 at 12 degrees at the tip with a marine cam now can I get more?OR is that about it. :?
 
I have a low end cam that I used in my DD 350, that I need to get rid of it because I am rebuilding. It's a 3000 rpm cam and it's like brand new. It worked awesome in my boat. I went from turning a 72x30 wide blade to a 72x36 wide blade, just from changing the cam. I also have the hydraulic lifters for it too. Shoot me a PM if you are interested.
 
Robby Bondurant":9jih4ys4 said:
I have a low end cam that I used in my DD 350, that I need to get rid of it because I am rebuilding. It's a 3000 rpm cam and it's like brand new. It worked awesome in my boat. I went from turning a 72x30 wide blade to a 72x36 wide blade, just from changing the cam. I also have the hydraulic lifters for it too. Shoot me a PM if you are interested.

That is bad ass for a 350 DD. That more like a cadi 500 motor!
 
Back
Top