I need warp drive blades

[FloridaQuaker1027]

My buddy blew a blade on his warp drive and is having trouble locating a new on.....He has a 72" 5 blade....We know one deffinately needs to be replaced and possibly 2 others so we are looking at a total of 3....Drop a line if u have any info

 

[mwood7800]

I tried to locate some with no luck, had to send the serial # to warp drive and have a couple made, I think they were 250 a pop and took 2 months

 

[spooledup50]

i am selling a four blade prop how long is your blade leanth mine is 30 1/4 inches from tip to bottom of the shank makes 68 1/2 inch on small hub if you have the hub they will make 84 '' i have never cut my blades down but i know its cheaper to buy a used set then new blades it takes two weeks to get them and they cost about $278 a blade to your door trust me i have rolled mine over and smacked the cage alot when i was younger and i paid for it every time you dont have to buy mine but trust me buy some buddies

 

[grant]

After you get a set to keep you going, send the old set back to warp drive and have them repaired/reconditioned. They come back good as new.

 

[FloridaQuaker1027]

me and my buddy are looking for just one used blade at this piont.....the other two are not bad but for piece of mind after hunting season is over and the water goes down we want to either get them replaced or reconditioned....if any one know anyone that has a few blades they want to off load let me know.....We put a blade of a 70" prop just to get us home witched worked alright but we had a vibration

 

[c chardt]

If you want new blades just call classic and they will ship out what you want. if your looking for used it might take a while but they will show up

 

[gpu rick]

i have some serviceable 72 inch blades in stock 200.00 each in great shape.
PM if your interested. in broward county.