• If you see ads here, log in and they will disappear. If you need help logging in or getting registered, send request to: webmaster@southernairboat.com

Intake connection hose source???

goldhunter_2

goldhunter_2

Well-known member
been all over in the last two days looking for some hose big enough :twisted: who the heck sells the new rubber 2 1/4" hose that will fit over the intake tubes :?:

Also building some new intake sections if anyone has a source on a 9-10 stick of 6063 aluminum 2 " pipe (measures outside 2 3/8") in a thin wall like schedule 20 or something :?:
 
This is for a Continental intake system right. You can buy 3' lengths of coolant hose at some hardware/auto stores, and most hose shops. They sell for about $15.00- $20.00 per length. Factory hoses can always be ordered and are nice but they get quite expensive when you have to buy so many of them.
 
I GET MINE FROM MAKO HOSE AND RUBBER IN WEST PALM , THELL CUT THEM ALL FOR YOU IF YOU HAVE YOUR OLD ONES , THEY GOT CLAMPS TO IF YOU NEED THEM..
 
Panther has a quite of selection but not the size I needed I ended up going to a part store in melbourne. I am pretty sure Panther has that size though.
 
yep for a continental , I tried Marnie stores, hardware and industrial supplies today but not the right size most where to small


Thanks everyone for the suggestions I'll try some of those places :D
 
I have bought the 3' lengths of the coolant hose I mentioned at Amazon Hose in Miami. There is also an Ace Hardware Store called McDonald Hardware here in Ft. Lauderdale that carries it. I have used them for the smaller Lycoming intakes. It is avaliable in 2 1/4". The factory red silicon hoses can be ordered through Superior Air Parts, but they cost $7.50 to $8.00 our cost. I think the 0-470 takes 10 of them.
 
You must log in or register to reply here.
Back
Top