• If you log in, the ads disappear in the forum and gallery. If you need help logging in or getting registered, send request to: webmaster@southernairboat.com

Need new prop!

R

ricmey1

Well-known member
I have a 13' fiberglass hull with a 220 gpu, it has been rebuilt and is a strong motor.
I am currently running a 4 blade warp drive at 7 1/2 degree pitch and runs good. 2 pf the blades need reconditioned so I thought what the heck, lets try something new! I run dry on occasion and would like something less noisy. Any suggestions????
 
Over Budget that is one heck of a offer :thumbright: :thumbleft: Ricmey if you say that 220 runs stong you should be running a 5 blade and you would see a big diffence than that 4 blade,I had the same prop and it worked very well but like you i could not stand the noise any more.I run a 72"power shift right now and it does what i want it to do with out the noise.I would take Over buget up on his offer,It's not that much work, plus you might get a airboating friend for LIFE :lol:
 
Ricmey its alot quieter than the paddle I had.The big difference was the fuel increase.If you want to try it you can it will take about 20 minutes to set it up.
 
Hey Fatboy let me know next time you go frogging at kissemme.I need to exercise my boat.That offer goes to anyone here that wants to try a Water Walker on a ground power that's close to me.
 
You must log in or register to reply here.
Back
Top