• If you log in, the ads disappear in the forum and gallery. If you need help logging in or getting registered, send request to: webmaster@southernairboat.com

New fuel injected WaterThunder motors!

Waterthunder

Waterthunder

Well-known member
I'm proud to announce our new fuel injected motor will be available in two weeks. We are completing some more dyno testing this week but everything is performing very well right now. I can't make as much power with the DFI as I have with the carbureted motors so the fuel injected motors will be in the 450HP range. I will be selling these motors 100% turn key and they will be tuned on the dyno! I will supply a fuel pump and all relay's so every single nickel and dime component will be included with these motors! Because of this I will supply a one year warranty! You will not need to purchase any parts to run this motor! And everything will be completed and tuned before you pick it up you just need to install it I will not have to show up later with a lap top to tune it and charge you more money. Many people do this and charge you $500 just to tune it!
 
Sounds very cool, Thunder. I'll bet the gas mileage will be amazing with one of these new motors.
 
A fuel injected airboat, You are the man.

Send me a PM with the price for a mildly built small block. I will need one within the year to make a 16' x 7'8" boat for myself.

JIM
 
To be honest I could make 600HP or more with electronic fuel injection but I will only run OEM fuel injection parts. I will only run OEM, injectors, air doors, regulators and fuel pumps. Aftermarket fuel injection parts are not reliable or at least not reliable enough where I would ever offer a warranty. The control unit I'm using is awesome thus I can tune some more HP out of the stock throttle body, injectors and other parts. I can make 600 with a electronic fuel injection but I would only trust the OEM parts in the marsh! The 450HP electronic fuel injection will perform with a 500HP motor when below 4,500RPM!
 
I think the guys up North will really like an injected motor because they'll start and run cleaner in the cold, and OEM components will make life a lot simpler for everybody after the engines are out of warranty.

IMO, they'll be perfect for the boats Faron builds for the Coast Guard. They'll start and run anywhere they take em.
 
Well were almost there. Just made 475 HP @5,900RPM's with my new fuel injected LS2 motor! I could turn the RPM's up a tiny bit and make 500HP but I'm gonna do it with out the RPM's. Anyway one more week of dyno testing and I will offer this fuel injected motor with a one year warranty! If I make 500HP with it I will sell it as a 475HP motor! This is a mid grade octane fuel AKA not even premium pump gas with OEM injectors, fuel rail and sensors with a full programmable engine control box. PS you want to talk about a fuel efficient motor that idles dead smooth this bullet is it. Man I can't wait to try two more things. If I can switch the file to a PDF and post the dyno sheet I will.
 
You must log in or register to reply here.
Back
Top