Pilot bushing for kway gearbox to fit lq9 6.0 ls

[fanboat_mike]

Can anyone lead me in the right direction of where I can get a pilot bushing for a 2004 lq9 6.0 LS motor to fit a kway gearbox. Motor is out of a cadilac Escalade

 

[One Eyed Gator]

You need an adapter bushing to make up the .400" different in Crank length and use the regular brass pilot bushing to center the drive plate.

Depends of the transmission 4L80 has a spacer and flexplate but you will still have to drill 3 of the torque converter hole out or get a LS to TH400 swap flexplate,

 

[Grizzily2]

Call Stinger Drives at 727 483-3838. They usually have the bushings and flywheel in stock for LS's.

 

[fanboat_mike]

Call Stinger Drives at 727 483-3838. They usually have the bushings and flywheel in stock for LS's.

I called them they don’t have it for my motor gearbox

 

[fanboat_mike]

You need an adapter bushing to make up the .400" different in Crank length and use the regular brass pilot bushing to center the drive plate.

Depends of the transmission 4L80 has a spacer and flexplate but you will still have to drill 3 of the torque converter hole out or get a LS to TH400 swap flexplate,

Where can I get the LS to TH400?

 

[JLP3314]

Where can I get the LS to TH400?

Have you tried TransDapt?

https://www.hedman.com/Trans-Dapt-Performance

 

[One Eyed Gator]

Sent you a private message

There are several different options