• If you log in, the ads disappear in the forum and gallery. If you need help logging in or getting registered, send request to: webmaster@southernairboat.com

TURD Talkin

kwanjangnihm

Moderator
added some new quotes to the old list I had going! :lol:

MAKEN BACON said:
So I think I bought a turd and got bigger problems then a prop ..

bruceharwell” said:
I ran a 150 on a palm beach hull at the same time and it was a TURD

billybob said:
My heavy turd runs the hill for more than just the motor Angle
DynaMarine” said:
After all it's just a little 4-banger and the nitrous is just a little spool shot to get that turd off the ramp

crowhater said:
All the power in the world is not worth a rat turd if you can't put it down

Junker said:
When asked by a restaurant manager "How is it?" ......."It will make a turd"
clark-kentski said:
That's going to go over like a turd in the punch bowl
highlife57 said:
How about an Eco Turd
strokin05ct said:
I'm excited to complete my build and ride with the "Ecoturd" group one day soon!
digginfool said:
That's all I need; another wore out turd
Tony480 said:
Hell yea if chucks could do 69 mph in 400'....yalls 600 horse eco turd should do 100...damn hawkzilla better watch out
swampfox said:
Just gonna b a turd with a gearbox
scottyroll said:
But when your choices are a giant douche and a turd sandwich - it's comical from my point of view.
Deano said:
that gearbox cam would be a real turd on a direct drive.
Oleboy87 said:
Sounds like you just need to get a good phone and get rid of the I Turd!!
gyrocopter582 said:
Yep, even on my old turd I bought the mackdaddy pump
Hog Guts said:
For some reason the turd tasting good statement just crossed my mind.
todd glover said:
Don Davis is king **** on turd mountain drive down and go for a ride on one and you'll never drive another
dougeey said:
I had one on my 14ft what a turd it moved it but that was about it .
Tony480 said:
Just keep putting more junk on it and polishing a turd. It's still a turd! :roll:
chasinbytes said:
smother em down with onions , mushrooms and celery over rice and they will make a pretty decent turd.
bigworm470 said:
Thanks agian Terry for taking the time to put the NGQ on my polished turd.
southernrican said:
Ok good cuz ya I wanna give my old turd a face lift lol
Tony480 said:
Well damn you act like you run that turd.
John Fenner said:
Looked like a cow turd with a wagonwheel track right up the middle!
dblj006 said:
What do you get when you polish a turd? ... Turd.
Tspot said:
Turd Polisher" or Polished Turd" just not decided on which one yet!!
ptr34 said:
he's scared to race :lol: that turd with 60 pounds of prop on it.
Bruce said:
Dude got raped on that turd and knows it thats why hes tryin to unload it because it wont get out of its own way
Oleboy87 said:
No that wasn't me Fl cracker, my turd is still in one piece!
big3country8 said:
Pretty sure ill sacrifice 40$ not to have to ride a frigging turd all day.
todd glover said:
I'd call him a turd but I don't want to insult any turds
Rich Andrews said:
I wouldnt deposit a turd in cash w anyone
Basin_Runner355 said:
It’s not like it’s a turd I can climb a. 20-30ft levee
Rich Andrews said:
Please, FWC does not manage a turd in a toilet nevertheless a deer
Slidin Gator said:
Perhaps I didn't ask the correct way originally, but I still don't know what this Turd weighs?
CarMotorBarge said:
I saw an Eco Turd pull an airboat back to the ramp one day. The Eco Turd got the boat being pulled on plane
Muckduck said:
It would be pretty devastating if after all the time (over a year) and money (way more than initially anticipated) it ends up running like a turd
CarMotorBarge said:
Your EcoTurd ran 2 straight miles of dry in the middle of Gardner's Marsh with 3 people on the boat. Not too bad for a turd.
huntridewrench said:
I didn't sink it, but it is a turd and a deathtrap
 
I knew Todd Glover would be in this, RIP buddy!

Here is a picture of a boat we built as a tribute to him, he was a FedEx truck driver, I had bought the metal and had it bent for him, sadly he passed before I got it out of the bend shop, my son actually built this under my direction to learn the trades involved in building the sleds.
 

Attachments

  • 51630100_2236508436400587_4407165315083927552_o.jpg
    51630100_2236508436400587_4407165315083927552_o.jpg
    179.4 KB · Views: 1,841
That's an old school palm beach style dogleg steering. Tightest I've ever driven. Can't beat a riveted hull.
 
SeatCover said:
That's an old school palm beach style dogleg steering. Tightest I've ever driven. Can't beat a riveted hull.
I have a riveted Hull also for right now I like it a lot. Not good for where I run though. I have mechanical steering as well and my new boat will be the same. Definently prefer mechanical over the cable.
 
Back
Top