• If you log in, the ads disappear in the forum and gallery. If you need help logging in or getting registered, send request to: webmaster@southernairboat.com

two blade powershift hub

CONTINENTAL CRACKER

Well-known member
anyone have a older style powershift 2 blade outer hub?it has the threw bolts.found a small crack in the outer plate on one of the bolt holes. can the be wielded?or will that throw it off balence?
 
You can't mismatch hub halves,they are balanced.Call PowerShift they can make you a new one.
 
Tony480":31hsxilr said:
You can't mismatch hub halves,they are balanced.Call PowerShift they can make you a new one.
are you sure they are matched ,i am not questioning you; just curious.usually the tips of the blades are weight matched to take care of any out of ballance.in my thinking if they ballanced the hub they would have to balance all together as a set including the blades.inner rotating force is not as badf
as the outter circumfrence.
 
depending on age between the transaction from powershift to waterwalker hubs ordered from them bared no name i had one now goldhunter has it. :cry: one other thing sensenich used threaded hub halves or the nordlocks i think that is what they are called long before powershift did.and i think sensenich puts their serial numbers facing each other on the inside of the hub and powershift on the outside.(but this is just speculation i am not sure on the serial number placements.
 
hey yall i bought those blades and they are seating on my boat right now lots of push real good blades real happy with them!
 
hey captain chad,i guess i could have put your screen name together and figuered that out.glad those worked out good for you.lone cabbage is that in around the area or was i way off?
 
bondsman":2k6i0z7u said:
hey captain chad,i guess i could have put your screen name together and figuered that out.glad those worked out good for you.lone cabbage is that in around the area or was i way off?

Lone Cabbage is off of 520 and Jolly Gator is off of 46. But there not real far away from another.
 
yea your not to far off i do run that way from time to time. i'm still using that prop as a 2 blade but i am looking for a 3 blade hub. have put lots of hours on the prop and am very happy with it but i would like to throw that other blade in to see what will happen maybe lower cruise rpm i dont know but will see.
 
Back
Top