• If you log in, the ads disappear in the forum and gallery. If you need help logging in or getting registered, send request to: webmaster@southernairboat.com

Wade's project

J

jim

Well-known member
I am posting these pictures for Wade, he will explain:

Picture_016.jpg

Picture_017.jpg

Picture_018.jpg


Jim
 
Thanks again for your help putting the pictures on the site Jim!!! Your the man!! This is my project guys, let me know what you think. 425 stainless locking nuts, 1'' flat head bolts, stainless neoprene bonded washers. 12hrs labor. The hammock was for when I got sleepy!
 
Good looking boat wade.

I had a hull about the same size with a 500 CAD about 12 years ago. I really enjoyed that boat. It was a $500.00 motor & I ran it about 3 years & sold it. Believe it or not it ran the hill extremely well & was fast in the water. Sunk it one time, but it wasn't the hull's fault.
 
Thanks alot, I'm real excited to get it out there. My old hull was an old narrow fiberglass hull that you had to watch what you did closely. The top of the transom was about 5" out of the water at rest. I believe I'll enjoy this one much better. What do you think, will I need a trim tab for it? I have a 472 caddy with 3 jacks on the rigging, 3 seater front steer. The old hull had a tab on it but it was 12ft. and narrow.
 
You must log in or register to reply here.
Back
Top