• If you log in, the ads disappear in the forum and gallery. If you need help logging in or getting registered, send request to: webmaster@southernairboat.com

Warp Drive 4 or 6 blade?

ricmey1

Well-known member
I have a 4 blade warp drive prop now, what would I lose or gain with a 6 blade? I have a fresh rebuilt 220 gpu on a glass navigator hull. Thanks,
 
My buddy has a 5 blade on his 220 and if he had a 6 blade hub he would put it on you can pitch it to spin up so it should work
 
I currently run an Jr Jernnigan 0540 with a 5 blade .I am looking for a six .But I am working on exhaust first
I would run the six and stager the prop and the pitch. I have heard and seen a setup like that run and it was a lot more, should we say hear frendly than my 5 blade.Took that bite out of the sound.and made it quiet.
I would also bet it would keep the snap in it that a warp drive has.

But I would also look into some of these props these guys talk about on this site that are alot quieter than a warp WE MUST work together to quite our boats before the pen does.

Just another penny
Pat
 
Back
Top