Recent Airboat Pictures

Click here for the full Southern Airboat gallery

Active Airboat Topics

Recent Forum Topics
  • KIMG0459.JPG KIMG0459.JPG KIMG0460.JPG
    October 18, 2018, 8:46 pm by terrible ted
  • https://youtu.be/Y8GGpYFmkYI
    October 18, 2018, 8:46 pm by cowboy
  • According to 1 builder, the considerable weight difference alone between the cast stock pistons and forged Ross pistons, should give it a lot more snap. The add a point and a half in compression and hopefully it will be magic. Bearings and gasket kit came in today, I'm gonna spend …
    October 18, 2018, 8:20 pm by rowdy1
  • I had mine painted and then the guy clear coated it with some automotive stuff and its going strong 6 years now,,,,
    October 18, 2018, 8:02 pm by pontoon outlaw
  • No major advances due to my wife and I’s anniversary but I did finish welding the ruddr end caps and I’m really happy how they turned out. I am going to try and pick up some metal tomorrow for rudder mounts on the cage and I also need to track …
    October 18, 2018, 7:59 pm by Muckduck
  • if and only if the carb is a MA-6AA helicopter carb and has not been converted or modified.....I had a very similar problem with an 0-540 and a 6AA carb last week and what had happened was the AMC unit had failed and was dumping unjetted fuel into the main …
    October 18, 2018, 3:21 pm by GMAC 76
  • Dave if you have any S blade data I would be interested in hearing about your testing.
    October 18, 2018, 8:39 am by SWAMPHUNTER45
  • Yep, not an H, that’s good. Wide deck means easier availability of cylinders. It is a straight valve for sure, I don’t think they made an angle valve 320. Hp depends on the pistons. Dished are 7:1 and make 150 hp at 2,700. Flat are 8.5:1 …
    October 17, 2018, 10:27 pm by Slidin Gator
  • Dud! I can't make heads or tails if you sold something or bought something? That's my 20 seconds reading it!
    October 17, 2018, 9:21 pm by Prototype
  • cool. best of luck with that new motor!!!! sounds like u are on the right track!! I used to have a 15' porier hull with a 454 and a 2:1 and always wondered what it would do with more reduction. them deer peas are hard …
    October 17, 2018, 8:06 pm by jopete