Recent Airboat Pictures

Click here for the full Southern Airboat gallery

Active Airboat Topics

Recent Forum Topics
  • I offer a rework service to your existing LS harness. DBW and DBC. Each harness is completely torn down and gone through. I will remove and de-pin all un needed wires and sensors. I also add a data cable that runs inside the cab that contains all the wires for …
    August 18, 2018, 6:51 pm by LukeBurns
  • What RPMs are you going to run at WOT? Do you want a smooth idle? I would stroke it while you have it open. It will be cheaper in the long run. You could also get the heads you have now CNC ported. i …
    August 18, 2018, 2:09 pm by Acowart1
  • I moved the winch post thanks for the recommendation. All that's left is replacing the bow roller and painting everything. In all, it was about $150 in parts plus my own time and labor. Here's a pic of the 'semi' final product.
    August 18, 2018, 3:08 am by AlaskanOutdoorsman
  • FYI, If anyone is looking for (or never heard of) adjustable push rods for aviation engines, you can get them (or any other push rods) from Smith Brothers out of Oregon. http://www.pushrods.net . I got a set for my Lycoming O-540 Straight Valve, Narrow deck. Smith Bro's P/N …
    August 18, 2018, 1:22 am by Slidin Gator
  • Moryak, You should have used "Borat" as a screen name! Can you explain, or better yet post some video, of the areas you are looking to run? You say your waterways have sharp turns, but the whole concept of operating an airboat is to stay out of the river …
    August 17, 2018, 8:18 pm by Slidin Gator
  • Sent you a PM. :salute:
    August 17, 2018, 7:13 pm by kwanjangnihm
  • Yup! Got a 10' and a 8'-6" last night. Nice what are we’re your tags for. Anyone using airboats
    August 17, 2018, 6:18 pm by Keeth1123
  • Anytime you do anything to the bottom of a boat it should be blocked up and leveled.
    August 17, 2018, 7:31 am by Gary S
  • Let's make this big everybody come to miles point 10/6 win some prizes and help a good cause hope to see you there
    August 16, 2018, 11:42 am by mbwilsonjr
  • I have a o470-13 does anyone know where the oil temp sender should be installed mine is installed in the oil pump housing where a pipe plug came out of is this correct? Thanks in advance
    August 16, 2018, 10:35 am by dimotta