Recent Airboat Pictures
Active Airboat Topics
Recent Forum Topics
Borg- Warner gear box
Looks like a tank for the gear oil. Must have a circulating pump also.
June 17, 2019, 9:49 pm by swamper2
I'm Building 2 Stossel Boats with High Torque Motors
CMB, no doubt the AC market is used, but it is generally quality. Regardless, cost is not my primary driver, not even the cost of fuel. I'm 1 hour minimum from legal running, I want a boat that runs right when I get there and brings me …
June 17, 2019, 9:37 pm by Slidin Gator
New prop help
is it possible to have good air/fuel readings and still not get enough fuel to max the system out?? (not pressure, but volume) :scratch:
June 17, 2019, 7:31 pm by kwanjangnihm
Caddy 500, 4bbl carb or Holley Sniper?
Buddy did up the first new 650 on my motor with the stock intake and 1” riser. Great response and runs great on my 500!
June 17, 2019, 7:28 pm by Christie
you can add 360 rods to them to increase the compression or have the case bored out for the larger 320 jugs.
June 17, 2019, 1:26 pm by boostedigo540
Ma4 or ma4-5
Sometimes the ma 4-5 does a better job. Ive seen 100 rpm increase with them. I have a few overhauled
June 17, 2019, 1:25 pm by boostedigo540
Running in salt water
Yep, there's 2 then! Duece
June 17, 2019, 9:04 am by Duece
LOOKING FOR A WATER CHECK IN THE MICCOSUKEE RES
We went to the tower on 6-2-19 had water to the Indian land sign took trail toward tower and started hitting several spot with no water but we did get to the tower
June 16, 2019, 6:28 pm by richbag
June 16, 2019, 4:50 pm by Barbie
LOW TORQUE LS Engine Build
On occasion, people get bored and want to build a slug on purpose! Most of them would buy an Alum 500 cad block for 50 bucks if it was made. There is no science in making power or not, just budget and how reliable you want it? Thrust testers …
June 16, 2019, 4:20 pm by Prototype