Recent Airboat Pictures
Active Airboat Topics
Recent Forum Topics
Balistic gear box
Are your attempts to contact them through or at Dyna Marine ? If not, maybe these numbers will afford you better results ?
May 23, 2019, 12:46 pm by Deano
Twin water props on some airboats
wouldnt it just be a DC motor to a prop with a simple throttle? thinking golf cart motor... nice thing about electric: 100% tq @ 1 rpm.
May 23, 2019, 10:32 am by ryansmoneypit
twin water props on some airboats
Thanks to you all who replied. I see there's a system with water jets used as bow thrusters on yachts. That could do it. We'll see ... !
May 23, 2019, 4:53 am by kitthackeray
Name this Motor.... No Nameplate
I guess “a few days” has turned into a month. I’ve been busy going through this boat with stringer and glass work. Pulled the prop and found out the prop hub bolts are indeed 1/2”.... It seems the motor is dimensionally correct for a 0360.
May 23, 2019, 3:27 am by Cm3gator
I'm Building 2 Stossel Boats with High Torque Motors
I will be well under the $70K bogey with 2 great running boats. It just takes 5 years total. It is helpful that my youngest just Graduated college. Now I can focus on important stuff!
May 22, 2019, 11:17 pm by Slidin Gator
Building a 70k airboat
:cheers: :cheers: :cheers: :cheers: :cheers:
May 22, 2019, 9:17 pm by krazymatt
180 engine mount question
First off, was the straight mount engine a wide deck case with the 5 hole saddle at prop end, if so you need that mount if yours is a wide deck as well. Next you need 2 steel counter sunk weldment cones, and 4 cone mount insulators to bolt to …
May 22, 2019, 12:37 pm by John Fenner
Frog Gig info needed
Oh, and I loved the way those Floridians were throwing those monkeys on those hogs.LOL These damn Rednecks down here know all the tricks.
May 21, 2019, 8:41 pm by Lwells
History of Lake O
Now I like this and Thank you for the post for it was very interesting
May 21, 2019, 8:19 pm by Lwells
Prop VS Motor: Airgator, LS2 6.0, Sensenich NEED ADVICE
Sarros, Adding the lower bung is a good choice for sure, a flooded suction is the only way an HP pump like that Turbine (Rolling Cell) Bosch pump will survive on it's own. Those things cavitate bad without positive pressure on the inlet (note that they label them In/Out, …
May 21, 2019, 6:39 pm by Slidin Gator