Recent Airboat Pictures

Click here for the full Southern Airboat gallery

Active Airboat Topics

Recent Forum Topics
You can remove the FPCM from the tune all together, just make sure the fuel pressure sensor is wired to the ECM correctly and in the regulated supply line to the High Pressure Cam Driven Pump. LHU fuel systems are direct injected so there are some extra steps that …
March 18, 2019, 5:39 pm by br,lc,LA
No issues with fuel heating at all... been running a Bosch 044 @ 58psi and Aeromotive return regulator. Regulator is on the return side and the fuel rail is a flow thru not a dead end. There is enough volume in the tank to keep it cool most …
March 18, 2019, 5:32 pm by br,lc,LA
What manufacturers are still out there for glass hulls
Gilileo Predator Ricochet Woods & Water Jimmy White Marty Bray use the search function top right hand of screen to find contact info for each! :salute:
March 18, 2019, 5:02 pm by kwanjangnihm
Engine help on a 16X8
For a 4 blade JR, I would recommend a 2.68 ratio. I would also recommend getting an EFI aluminum LS from a builder near you. You don't have any crazy expectations. A stroked LS3 with the Holley HP EFI and a little cam is hard to beat.
March 18, 2019, 3:22 pm by CarMotorBarge
Where to put the braided coupler?
Right on the end of the collector? Then hard pipe ok to the X muffler and to the end mufflers still working ok? I don't care for flex tube personally. 496/600 torque, has 3 inch collectors, I can get 3 inch mufflers or 3 inch to 2.5 inch …
March 18, 2019, 1:46 pm by rost495
A.A.O.F. Corned Beef & Cabbage Poker Run
Always a great time at the AAOF , Tim you sure know how to make splash that's for sure lol
March 18, 2019, 11:13 am by lilly-Pad
408 Ford stroker build underway! Direct drive
The combo that worked for us on my Son's DD was we stroked his 350 to 385", but kept the stock Vortec roller cam and the stock Vortec iron heads, running a 70" Q. Never been on a dyno, but he has no problems running dry ground with 2 …
March 18, 2019, 10:40 am by flcracker9
Lycoming vs. Continental
Thanks for the info guys much appreciated! good meeting you at the airboat club saturday John, i was there with timmy buckhalt.
March 18, 2019, 8:49 am by agracia93
Maybe one day.....maybe one day!!!!!!!!!!!!!!
March 17, 2019, 4:06 pm by SWAMPHUNTER45
Jimmy White hulls
I will poly my next one. Really nice light hull but only concerns are dry loading with a winch from a dead stop. Not that the boat cannot power up but never hurts to listen to your hull being dry loaded on occasion with a hand crank winch.
March 16, 2019, 10:20 pm by Prototype