Search found 130 matches

by gpu rick
Fri Mar 13, 2020 3:42 pm
Forum: Aircraft Power Only
Topic: Continental 220 GPU
Replies: 11
Views: 1087

Re: Continental 220 GPU

Which gasket do you need from fuel pump to drive. Number # 6.
by gpu rick
Thu Mar 12, 2020 1:28 pm
Forum: Aircraft Power Only
Topic: GPU cutdown oil pan/sump
Replies: 7
Views: 1204

Re: GPU cutdown oil pan/sump

A stock gpu 220 sump weights 22 lbs. I have modified sumps in stock and they weight 10 lbs
by gpu rick
Wed Feb 12, 2020 4:38 pm
Forum: Airboat Tech
Topic: Gpu220 losing power at full throttle
Replies: 7
Views: 446

Re: Gpu220 losing power at full throttle

It could be many things. I would check your magneto check to see If you have carbon tracking in your terminal block your mag could be shorting out. This is a common thing in aircraft engines that lose power at higher rpm. Had a lot of people bring there gpu's in to fix and they think its the carb an...
by gpu rick
Thu Jul 06, 2017 9:21 am
Forum: Aircraft Power Only
Topic: 220 rocker cover gaskets and exhaust gaskets
Replies: 4
Views: 774

Re: 220 rocker cover gaskets and exhaust gaskets

If your going to clean it up and you want it to stay clean I would advise you to make sure that you have copper washers on your spark plugs. I see it all the time on bottom plug hole if cylinders are just taped without welding new material because most are heil-coil and there are not many threads. T...
by gpu rick
Sun Dec 11, 2016 1:00 am
Forum: Aircraft Power Only
Topic: 520 runs rough after back fire. Lets take bets on what broke
Replies: 13
Views: 1902

Re: 520 runs rough after back fire. Lets take bets on what b

I my guess would be carbon tracking on your terminal block in one of your magneto's.
by gpu rick
Tue Jun 21, 2016 10:24 am
Forum: Aircraft Power Only
Topic: 220/047 conversion
Replies: 10
Views: 1450

Re: 220/047 conversion

it was in the late 80's early 90's P/N 648013 was replaced due to the piston skirt it was causing cylinder failures with leakage. Replacement P/N 648045 had the skirt contoured to reduce cylinder stress. 648013 was to be scrapped per FAA
by gpu rick
Tue Jun 21, 2016 9:30 am
Forum: Aircraft Power Only
Topic: 220/047 conversion
Replies: 10
Views: 1450

Re: 220/047 conversion

I can assure you P/N 648013 is for a O-520.
by gpu rick
Mon Jun 20, 2016 9:01 pm
Forum: Aircraft Power Only
Topic: 220/047 conversion
Replies: 10
Views: 1450

Re: 220/047 conversion

Piston 648013 is for an O-520 engine,not O-470.
by gpu rick
Sat Apr 09, 2016 12:26 pm
Forum: Aircraft Power Only
Topic: 220 gpu part numbers complete list?
Replies: 4
Views: 912

Re: 220 gpu part numbers complete list?

PM me I have manuals for pe 150 and im local.
by gpu rick
Tue Jul 08, 2014 7:05 pm
Forum: Aircraft Power Only
Topic: 220 gpu pistons
Replies: 6
Views: 897

Re: 220 gpu pistons

PM me i have factory new pistons in the box. And they are very reliable and you can rum pump gas i also have used piston different compression 3 and 4 ringed pistons in stock.

Rick
by gpu rick
Fri Jun 27, 2014 5:30 pm
Forum: Aircraft Power Only
Topic: 220 mag
Replies: 5
Views: 567

Re: 220 mag

i have new bendix magneto 20 series parts in stock. pm me for pricing
by gpu rick
Sun Sep 08, 2013 2:13 am
Forum: Aircraft Power Only
Topic: 220 gpu cylinders
Replies: 9
Views: 1182

Re: 220 gpu cylinders

You might be able to do it for $1000.00 if the barrels are in good shape and not pitted. but i would make sure they are true honed on a sunnen machine. but in most cases its over $1000.00 its hard to find good barrels.
by gpu rick
Wed Jul 31, 2013 5:40 am
Forum: Aircraft Power Only
Topic: 220 GPU Dipstick
Replies: 6
Views: 839

Re: 220 GPU Dipstick

I have dipsticks in stock PM me and i will quote you one.
by gpu rick
Wed Jul 03, 2013 8:17 pm
Forum: Aircraft Power Only
Topic: what kind of starter is this??
Replies: 7
Views: 794

Re: what kind of starter is this??

that appears to be a nippon denso starter used on many import's. and many airboat starter kits.
by gpu rick
Thu May 09, 2013 10:23 pm
Forum: Aircraft Power Only
Topic: Looking for a nice 4 barrel intake for a 220 GPU
Replies: 5
Views: 679

Re: Looking for a nice 4 barrel intake for a 220 GPU

I have 2 & 4 barrel intake's for your gpu's. PM me and i can send you pictures
by gpu rick
Wed Nov 07, 2012 6:31 pm
Forum: Aircraft Power Only
Topic: 220 gpu adding another sparkplug
Replies: 22
Views: 2991

Re: 220 gpu adding another sparkplug

John all i can tell you is that i have built so many gpu's with this kit & sold many kits that I personally never had a failure. Also i have never had anyone call about there magneto failing either, after installing the kit as well. I built my dual mag gpu on my boat in 1991 and its still working fi...
by gpu rick
Tue Nov 06, 2012 7:37 pm
Forum: Aircraft Power Only
Topic: 220 gpu adding another sparkplug
Replies: 22
Views: 2991

Re: 220 gpu adding another sparkplug

I have a kit for sale for installing magneto gear right to your magneto. Save you from having to install the dowel pin to your case for your mag gear. PM me for pricing
Rick
by gpu rick
Sat Nov 03, 2012 1:40 pm
Forum: Aircraft Power Only
Topic: continental 220 gpu
Replies: 17
Views: 5497

Re: continental 220 gpu

I have the manuals in stock ready to go. 30.00 each

Rick
by gpu rick
Wed Oct 03, 2012 7:56 pm
Forum: Aircraft Power Only
Topic: 220 gpu adding another sparkplug
Replies: 22
Views: 2991

Re: 220 gpu adding another sparkplug

Yes it can
by gpu rick
Wed Oct 03, 2012 7:23 pm
Forum: Aircraft Power Only
Topic: How to tell if my cylinders are stock .10 or .15 over
Replies: 5
Views: 820

Re: How to tell if my cylinders are stock .10 or .15 over

If they are 15 over the cylinders should be painted green at the base,also you can check the flat side of the cylinder at the base and it should be stamp P15 on oversized cylinders. But the only true way to find out is to measure the bore of your cylinder with a bore gauge. The dimensions for standa...
by gpu rick
Sun Jul 01, 2012 8:05 am
Forum: Aircraft Power Only
Topic: PE-150 Magneto help (1st aircraft engine)
Replies: 7
Views: 960

Re: PE-150 Magneto help (1st aircraft engine)

you want to run solid cooper core 7MM wires. I use Accel kit part number 3009.
by gpu rick
Wed May 30, 2012 5:45 pm
Forum: Automotive Power Only
Topic: Roller Rockers on 502??
Replies: 6
Views: 605

Re: Roller Rockers on 502??

They can make a difference i work a scorpion performance we mfg the best rocker built and they are built in the U.S.A. give your heads a 5 angle valve job and a set of 1.7 endurance series rockers & good set of springs and it will make a big difference.
by gpu rick
Sun Jul 24, 2011 12:02 pm
Forum: Aircraft Power Only
Topic: Where to find pistons for 220?
Replies: 2
Views: 478

Re: Where to find pistons for 220?

I have different dome pistons PM me


rick
by gpu rick
Wed Jul 13, 2011 8:37 pm
Forum: Aircraft Power Only
Topic: 220 GPU gaskets
Replies: 5
Views: 631

Re: 220 GPU gaskets

PM me i have overhaul kits in stock.

Go to advanced search