The 90 degree fitting on the oil drain back line is only on 235-290-435 cylinders.
So it is 290

Stock it should have 8 qts without the cooler. Most run 7 .

I will stick to my sky Tec starter , one made for a aircraft engine.

How can I get to my albums and pictures . Says none.

Did you get my reply?

I have not received any private messages , ask away !

Going to defer to Justin Ficken

Private message me if you need any more info on it!

I would rivet them and you won't have leaks ,also the button is easy on the feet!

o-540 panel

Had a A-65 continental that would start by itself if I forgot to turn the mags off.

Duccarra is the best place to get rings.
Otherwise known as DG Supply.
Twister69z

Snap on brand 1/4 12 point swivel socket . 7/16 hold your mouth just right!
Twister69z
Looking my pictures for 3 pictures of tools we use to install the tunes.

Still looking for a 10-4404?

Just a new diaphragm and we teat them on a flow bench to make sure they shut off clean.
Twister69z

See attached picture

60729,77034,lw10124 or 18d23140
Take 8 of any of the above numbers.
Twister69z

Yep dried out and has a pin hole in it . Not hard to fix just need a few special tools to fix it.

The diaphragm has a pin hole in it , needs replacing.
Twister69z

Leaking from where?

Is most going out the breather vent? My I suggest a air oil separator to " recycle " the oil going out the vent? They do cut the bleeding down considerably. Also when topping the cylinders make sure to switch to 4 ring Pistons you will then have a "dry" engine?
Twister69z

See those holes in the small cap on the mag? Those are where "p" leads with special terminals are inserted and threaded on to the cap. If the part number of your magnetos designates the left magneto as a shower of sparks mag it will need two leads , one for the "l p"lead the other for the shower of ...

barhopper wrote:I believe it's better to have a bigger one and not need it than have a smaller one when you need a bigger one.

Exactly what my wife says!

barhopper wrote:I believe it's better to have a bigger one and not need it than have a smaller one when you need a bigger one.

Exactly what my wife says!