My rods have been re-machined on the crankshaft end .010 the crankshaft is standard size which is the proper term for
the bearing ?? P-10 or M10
thanks very much

great price of 300 dollars

the center fins on top of installed if oversized should be color coded. all i remember for codes is red is chrome plated back to stock size.
blue is maybee .015 yellow maybee .020 find the chart for oversized cylinders and you can know what you have without removing cylinder.

seems the higher RPM geared motors uses the MA4-5 i have one ment for a continental O300 suprised me when i looked it up most the 145's run a ma3spa. i upgraded my O300 to a MA4 gained 200 rpm over the MA3SPA.

gap plugs to .030 to avoid fouling. its normal to foul during engine breakin. read the book on breaking in engine.

bad fuel will cause exact condition your refering to. it seems to easy. but most of us have pulled hair tried everything and fuel was last thing tried.

watch the meeting they addmit using the FEMA funds other places then fixing the park.
click on meetings then click on sept 12 , 2012
http://okeechobeecountyfl.iqm2.com/Citi ... px?ID=1458

oh you got the commisioneers involved to a point they have ordered the place closed. now no one will enjoy a peaceful place by the lake with their boat next to the camp sight. only place on lake okeechobee like that. all my neighboors from out of state will not stay anywhere else in okeechobee to di...

camp bait shop is closed this weekend and all weekends till the 15 of oct. i dought you can get in to camp after 6:pm tonight

if you have an a/c case facing the back of boat look on right rear of engine down on bottom their should be a pad there to mount your manual fuel pump on. if it is not capped off then it will need to be hollered out and tapped to the fuel pump base to bolt it to. it is run off the camm and twister c...

the tighter the gap the more chance for the plug to fowl out espicially if its burning oil go .030 or u will be regapping them at the ramp.

i would sell that motor you mentioned, use the money to purchase a decent lycoming O-290 or a O-320 then you are able to buy used airboat hull one all rigged out around $1000.00 or less . that motor you have will cause you lots of headaces and nuthing available in the used market to work with. plus ...

BANANA BOAT who run who off ?

spring inside the starter selonoid may be broke or stuck contacts i think it is built in the starter.not sure thou.

click on meetings then click on sept 12 video if you want to hear how they admit on video they wasted the FEMA funds on other projects that were paid to fix up Okee-Tantee campground figure out why some of um arn't going to jail its illegal to squander fema funds. just spend how they want to then cl...

you might try looking up the term aluminum extrusion after finding company that makes them ask for T extrusion and size needed say 1.250 x 1.00 .062 thick.

gladstone I cant wait to buy my condo there. no perminate structures is allowed to be built inside the lake flood zone. it gets a huge storm surge when a hurricane passes from the strong winds. they want to sell lots on a 99 year lease to revert back to the county. lots for campers motor homes ect. ...

the campground and park is owned by the county the commissioners and they decided it is to much money to keep it opened as it looses some 60 thousand dollars a year. drop in the bucket of their 88 million budget to work with. what county park in this country makes a profit. that place brings in allo...

Okee-Tantee campgrounds is closing as soon as it can be packed up.

anyone know what the mag model numbers for side mouted mags on gso540 ?

forgot bout rivets my hull even has em.

most use a antifreeze coolent jug setting on bottom of hull strapped to cage leg and a tube from overflow to a small hole cut in the jug from the antifreeze. on my boat it had a brass radiator so i soldered a plug where the radiator cap was. you can have it done at radiator shop. then on my burp tan...

sorry but their is no other way on an aluminum hull to fasten the poly to an aluminum hull.

i would go with a 4 cyl aircraft motor only for the resale value of the boat. if you go dd auto engine your very limited on resale value.
look in the classified section there are a few boats in there that are under the cost to build um .definatly a buyiers market now.

you need to do like JAMES said drill a small hole in thermistat that will keep water flowing all the time and let air out before it gets trapped and gets hot enough to blow by the radiator cap.then after you fill it up from your burp tank up top let it run uncapped 1/2 or so a turn till all the air ...