Search found 112 matches

by woods and water
Wed Mar 23, 2016 10:19 am
Forum: Aircraft Power Only
Topic: How about these plugs?
Replies: 22
Views: 3328

Re: How about these plugs?

Looks lean on the fuel end but looks to be burning oil the dry plugs the porcelain is a little white you want it like a moca color
by woods and water
Mon Aug 31, 2015 9:42 pm
Forum: Airboat Tech
Topic: Webbing
Replies: 12
Views: 2356

Re: Webbing

Heavy webbing in a 12ft will take about 1 qt
by woods and water
Fri Jul 24, 2015 9:18 am
Forum: Airboat Talk
Topic: Front or back seat driver
Replies: 14
Views: 1884

Re: Front or back seat driver

Do you ride more with or without passengers without will be better back seat with will be better front driver
by woods and water
Fri Jul 17, 2015 9:56 am
Forum: Aircraft Power Only
Topic: 0360 losing power at wot
Replies: 17
Views: 1970

Re: 0360 losing power at wot

Use denso 14 at a gap of 28
by woods and water
Thu Jul 16, 2015 7:53 pm
Forum: Aircraft Power Only
Topic: 0360 losing power at wot
Replies: 17
Views: 1970

Re: 0360 losing power at wot

Check the plugs mine was doing same and it was fouled plugs
by woods and water
Mon Jun 15, 2015 11:35 am
Forum: Airboat Tech
Topic: First Hull - rigging
Replies: 6
Views: 1523

Re: First Hull - rigging

I have built hundreds of set of metalwork for people over the years and i try to talk them out of pancakes for theirs safety the bars in a pancake to a 3/4 cage are about 8 inch longer so it ends up about 88 inches in all not much wieght for a whole lot of safety
by woods and water
Wed May 20, 2015 10:40 am
Forum: Airboat Talk
Topic: F***ING LITTERBUGS
Replies: 20
Views: 2628

F***ING LITTERBUGS

this is how I found the pavilion at the milk bus Saturday those pavilions belong to me and everyone else I don't know how you keep your house but I keep mine a whole lot cleaner than this if you can't respect that quit using our pavilionsit won't let me post the pictures so I'm going to put him in t...
by woods and water
Wed Jan 21, 2015 11:25 am
Forum: Airboat Talk
Topic: Freedom Ride 2015 / Saturday, Feb. 21 / Lake Kissimmee, FL
Replies: 143
Views: 23232

Re: Freedom Ride 2015 / Saturday, Feb. 21 / Lake Kissimmee,

I think the club may have booked the ride same weekend as TCR again may make rooms hard to get again
by woods and water
Mon Jan 05, 2015 11:55 am
Forum: Aircraft Power Only
Topic: Gauge selection feedback
Replies: 1
Views: 862

Re: Gauge selection feedback

I use all electric Murphy
by woods and water
Mon Jan 05, 2015 11:53 am
Forum: Airboat Tech
Topic: rigging question
Replies: 8
Views: 1781

Re: rigging question

Yes d o it all the time on many boats
by woods and water
Tue Dec 16, 2014 9:33 am
Forum: Airboat Talk
Topic: F***ING LITTERBUGS
Replies: 24
Views: 3078

Re: F***ING LITTERBUGS

The bad thing about this post is the jacka## that did it probably dont pay attention to this sight or care it is the ones that responded to it that it bugged and that care my hope it someone sees some one litter and say something and we can change someone's out look so my passion is not taken from m...
by woods and water
Mon Dec 15, 2014 10:08 am
Forum: Airboat Talk
Topic: F***ING LITTERBUGS
Replies: 24
Views: 3078

F***ING LITTERBUGS

To the sorry sob that had a party at the dead river pavilion with Coors light mt dew and paper plates dont worry I picked up your mess yesterday. I would like to say that is not just your place it is all of ours if you dont respect that then dont use it
by woods and water
Mon Oct 27, 2014 2:01 pm
Forum: Airboat Tech
Topic: qwikdiesel num
Replies: 2
Views: 728

Re: qwikdiesel num

Got it sending it to him tomorrow
by woods and water
Mon Oct 27, 2014 10:55 am
Forum: Airboat Tech
Topic: qwikdiesel num
Replies: 2
Views: 728

qwikdiesel num

Need qwikdiesel number
by woods and water
Mon Oct 27, 2014 10:00 am
Forum: Aircraft Power Only
Topic: Airflow Performance Injection
Replies: 16
Views: 2772

Re: Airflow Performance Injection

All injection is temperamental you have to get system clean then go from there
by woods and water
Wed Oct 08, 2014 9:54 am
Forum: Airboat Tech
Topic: Panther 10' Fiberglass hulls?
Replies: 25
Views: 3745

Re: Panther 10' Fiberglass hulls?

I build a 10'6" wide gore have some pics on here check them out
by woods and water
Wed Oct 08, 2014 8:37 am
Forum: Airboat Talk
Topic: Richard combee's contact info
Replies: 3
Views: 810

Re: Richard combee's contact info

Hes gone this week but shop num is 863-439-5258
by woods and water
Wed Jul 30, 2014 12:02 pm
Forum: Airboat Tech
Topic: who made glass hulls for Combee?
Replies: 9
Views: 1515

Re: who made glass hulls for Combee?

Richard combee built the hulls for them
by woods and water
Mon Jul 28, 2014 10:24 am
Forum: Aircraft Power Only
Topic: need help with lycoming h2ad
Replies: 19
Views: 1427

Re: need help with lycoming h2ad

Bad bearings and that is a wide deck
by woods and water
Mon Jul 21, 2014 9:24 am
Forum: Airboat Tech
Topic: ss rigging prices
Replies: 9
Views: 1671

Re: ss rigging prices

That 3200 is about right on I'm around 3500 for lycomings sets and alo title more for cont or car motors
by woods and water
Sun Jul 06, 2014 1:07 pm
Forum: Airboat Tech
Topic: Affordable Airboat Communication
Replies: 21
Views: 3007

Re: Affordable Airboat Communication

I agree Ricks your tree talking now are great I use boat to boat when hunting and ro listen to music just riding
by woods and water
Thu Jun 26, 2014 7:55 am
Forum: Prop Talk
Topic: 4 cyl props
Replies: 24
Views: 2963

Re: 4 cyl props

70" Q is best for me
by woods and water
Tue Jun 10, 2014 11:14 am
Forum: Airboat Talk
Topic: for all the vw haters and lovers
Replies: 9
Views: 1780

Re: for all the vw haters and lovers

A lot of people including my self ist pics of builds that has to be the best show of talent and skill I have seen on here yet totally bad a$$
by woods and water
Mon Jun 02, 2014 10:23 am
Forum: Airboat Tech
Topic: Something to think about if new metal work is in your plans.
Replies: 19
Views: 3469

Re: Something to think about if new metal work is in your pl

Brass is goog but steel is not wrong I have built100s of met mid welded and some are 15 yrs old has well weld it right and braces it right

Go to advanced search