I'm finally getting around to replacing my poly on my old bear deck over once I get all the holes welded up . I had one of the first sheets of 5/16 gatorback on it. Whats everyone's opinion on replacing it ,is gatorback worth the extra money or should I use something else thanks

Not sure what it is but it's had its holes welded in the past and hull is welded not riveted.

I am needing to put new poly on my ole bear deck over. Should I weld up all the holes or try to use the same holes and use nuts this time. Or find someone to rivet it on forme. Any thoughts would be helpful. Thanks

Not sure what river you are talking about. Zero no wake zones on withlacoochee

good ride is to put in on 44 or outlet in lake pan on 470 head south to the flats go into flying eagle and cross over to hot dog island, flag island and head to sleepy hollow for lunch usually a good $5 meal they have you get the best of the nice river with water up and also the fun of skinny water....

Gotta climb a big hill on outfall canal if u head north to hernando from 44. Big hill. Only option if you make it up is to continue the loop or gotta come down a BIG hill into DEEP water Putting in at 44 and head south to the flats and flying eagle. Safer for all boats. Plenty of water now so everyo...

Lower can help but can also make it worse. It can push nose down and water push it back up witch will cause it to porpoise worse. May need jacks in hull. Bottom could be flexing against water pressure. I would deff start with bottom of hull. Just my 2 cents

Start with level. Check bottom
With straight edge make sure back lip isn't rounded off

Back edge will cause it to hop like said above check with flat edge. Sharp edge will def help. Boat can rock on a rounded edge

Was a nice day for sure. Thanks to all for the hospitality. Will have to come back when water is up

See y'all boys in the am. Looking forward to it. North or south don't really matter to me

Awesome sounds great. Ready to empty my tank gonna bring some extra just incase. See y'all sat morning

Glad someone has figured out the ride to sit ratio. Haha. Looking forward to a great day Saturday.

Round 10 am

Heading over sat to meet up with rusty aka Buttraxx looking forward to a day of ridding and not sitting. this will be my first time in the area and am looking forward to new adventures. He promises we will ride and not just sit. seems like a lot of guys just wanna hang out and listen to their music ...

Planning on heading over. I'm a first timer. Never rode there before. Looking forward to some new sights

Use a set of 6 blade plates

2 of us. Looking forward to it

I'm running a 6 blade 72 and a bow tie 6 blade think I wanna try a 5 blade Also think it's what I need if I switch from warp blades to new style. Anybody got a set of plates to get they wanna get rid of

just built a new boat jw square nose with a 540 runs awesome fast fun and free yes it slides in tight trails but runs ground amazing have bout 3 gallons of quick slick tell jimmy its for a 4 cylinder the back edge is prepped diiferent and def let brian do youre bottom

GTO in ocala only 1 hour drive up 75 . or mail order from classic in cocoa always had what i needed and fast shiping

putting in at camp mack see yall out there looking forward to it second weekend on new boat Lovin it

Camp Mack. Ill be putting in bout 10 am Good ramp and parking

Polluted waters and maybe get permission to drive to it for race boats. Krvsa found a way to drive to it. Maybe they can give done input

Still running the ole original aircraft starter time for a new one. See a few different kits and brackets. What one seems to be the best. Thanks guys