What I need is the distance from the edge of the transom to the prop not clearance height on a full deck

What is a good distance off the edge of the transom to the prop running 12 ft boat with a 180 thanks for the help

I am looking for some stacks with little mufflers welded in the centers so I don't get a ticket , I thought about the headers with mufflers on the ends but I herd they break at the flanges and that's no good , any help would be great thanks .

I have a three blade 72 inch saber and it is super nice best of both worlds snap biotin end top end and everything in between

Gary I love the three blade deal thought it was going to look stupid but not so much I just wish my scorpion road better I have to pull the poly off and flOat the bottom hey I forgot what to gap my plugs at

Sseater I have a 180 sv with cut angle valve pistons and a nice cam

I went with a 72 set it on 8 the first time turned it at 3000 and bumped it to about 10 turning it at 2800 performs like a dream I have it on a 180 with angle valve pistons on a sv with a cam ! I like the Cruse I got from the 72 if I had a 160 I would go with a 68 just because they like pitch more t...

I recently bought a three blade saber form southern enterprises ,(thanks glenn) but i cant say enough good about the prop performs from start to finnish , top to bottom , snappy responsive as hell and keeps pulling !!!

What size fishshooter

How does your 3 blade saber setup preform thanks for your input

who is running a three blade saber setup on there four cyclinder or four blade set up thanks for the input

Anyone running a 4 blade razer or 5 blade razer on there 4 cyclinder and what length! Mine is a 0360 built thinking about selling my 69 inch 5 blade

twister69z wrote:Used to be able to buy them , Haven't seen them for sale in over 20 years.
I have used serviceable pumps , high or low pressure, $25 plus shipping.

how do i get ahold of ya twister i would like to buy one from u i need a low pressure , and u said that they will work ?

on my 0360 the manual fuel pump doesnt work , the reason y is that the gasket on the fuel pump is bad not the one that goes between it and the block but the one that is between the top and bottom of the pump , is there any rebuild kits for my pump thanks for the help

I am looking for a mechanical fuel pump for my 0360 I herd that u can use a bb Chevy pump , but what year and is the 6-8 psi they put out to much thanks for the help

I think u should go with 12 x12 1/2 hand laid wire more for the buck

go to GKA 0540 and check out some of his motors he has built

anyone ever have a set of stacks built ,with collectors in the end of each pipe , for a little back pressure , i think i might tryit on my 0360 what do yall think good or bad

u should call gary armstrong , he will build u the best running 4 cylinder around , he is honest and isnt out to stick it to u on the price i have his number , he hooked my 0360 up
great guy to deal with real down to earth southern man

i have a 69 5 blade on my 0360 straight valve , thinking about a saber , is anyone running a 5 blade on there 4 cylinder , if so how long and what pitch is it on

i have a 12 ft scorpion with a 0360 widedeck , i want to put a straight valve small journal 540 , it has a 6 inch transom on it , will it float a 540 thanks all

what is the weight diff in a 360 widedeck vs a straight valve small journal 540 ?
i have only about two or three inches of free board when im sitting

i have a 12 foot scorpion with a 0360 on it , it has a 6 inch transom , its 7'5 wide and i was wounderning if i could put a straight valve 540 and get it to float that weight ?

Thanks for all the input , now my next question is how did cracker get 240 horse out of his 0360

i would like to find out how much fuel others 4 poppers are burning a hour or gallons a day with normal driving , i know fulldecks will differ from high sided boats , i am runing a scorpion with a 180 thanks for the input