Search found 124 matches
BAMA not many good Airboat ride places that far north in ALA or GA. If you don't mind traveling 3-4 hours you can be at Lake Seminole OR Lake Jackson in south GA and north FLA and they both have excellent Airboat riding. We usually have 2-4 good size 20-30 Airboats rides at different places every ye...
That's right OLF, our Registration gives me and you that right. The only 2 places that I have seen Airboat restricted in South GA are the OCKEEFONOKEE Swamp and a Impound at Darrin on the Brunswick coast, they have Signs stating NO AIRBOATS ALLOWED.
I know Lake Eufaula- Lake Walter F George, from Georgetown to the dam on the GA side like the back of my hand. I was their 3 yrs ago playing in the 1''- 6'' water flats around Georgetown when the lake was 4'-6' low on my 520 sled with 2 other Airboats, seen DNR that afternoon when heading back to pa...
- Sun Jan 24, 2016 12:32 pm
- Forum: Airboat Talk
- Topic: Neils Scorpion WaterThunder DD
- Replies: 69
- Views: 8714
I seen Neils boat in action yesterday on the Hill, it moves and runs on green dry ground easier than my 11x7 Scorpion with a SV0540 and my boat has Quickslick. I was at WT's ordering my 500hp LS3 carbed motor with a Gearbox +8 blade Saber, and when we were done Dave said let me show you something ou...
That's what I was hoping for HAMMER. Does B-WHITE sanction race with a Excalibur or anybody else you know of, I also wonder does SIDEJOBS still run his. Thanks LSX1
Will a 72'' 4 blade bowtie Excaliber be good for a all around woods prop for a IO550 going on a 10'6x6'8 Deckover sled. I already had a Q AND WARP DRIVES on other boats and not considering those,I'm looking for good mid range and top in speed. My buddy has a 6 blade SABER stagger 72'' on a pumped up...
Didn't SIMPLEMAN have a 550 CONT once before he went to the dark side, what about NITRO EXPRESS race boat is it a 550. Just looking for some more feed back. Thanks LSX1
- Tue Dec 22, 2015 10:54 am
- Forum: Airboat Talk
- Topic: The first place you ever ran an Airboat?
- Replies: 66
- Views: 6935
Lake Seminole GA. 1981 a 10'x6' aluminum homebuilt with a 22R Toyota Eng, that at the age of 16 I worked and paid for myself.
Full deck Gary. JCgator I ran a 10'x6' wide Davis with a 10'' transom with a SV 0360 and it had 2'' of transom above water line sitting still,how much does your hull weight.Goldhunter do you think it would bounce being only 10'. My 11' Thurman runs perfect with a 520. Has anybody else run a 10' with...
Would a IO550 Continetal be to much weight for a 10' x 7' sled 9'' transom with a 1 seat rigging, oh and I weight 240, I just don't want it to bounce or torque real bad. I've seen a 540 on KAMAKAZI race boat, I think it would be fine what you all think. Thanks LSX1
Are IO550's with GITSO cylinders good for 600 to 800 hours starting from a fresh rebuild, any pro's and con's. How's the starting from being fuel injected, And are they as strong as a AV IO540. Thanks LSX1
- Mon Jun 01, 2015 5:53 pm
- Forum: Aircraft Power Only
- Topic: 0320 miss at 3/4 to full throttle
- Replies: 50
- Views: 4477
Either has a fuel restriction to carb or the float in the carb does not have enough DROP.Because engine will go to WOT for 10 seconds or so then lean out of fuel and start popping. My 0520 did the same thing and it was the FLOAT DROP was set wrong after a so called Mechanic rebuilt it. Fixed it myse...
- Thu May 21, 2015 6:28 pm
- Forum: Hunting & Fishing
- Topic: Rechargeable Dry Cell Feeder Batteries
- Replies: 5
- Views: 980
Duece I had 2 of the wild Innovation feeders and got your same results, one went bad so replace both with the digital Moultrie feeder motors and now get 3 to 4 months of run time at 6 seconds twice a day feedin porkers, I get my dry cell batters at Tractor supply.LSX1