YouTube polishing aluminum.

I ran the rpm air gap but my boat never spent much time under 1500 rpms

I Ran a air gap on my 383

Shane also helped me out with questions I had about my stinger gearbox. If I ever need a new box I will be giving him a call

I'm going from a pretty strong 383 to a ls1 with waterthunder cam kit. Do you remember what pitch you were running on the two blade s? I'll be going to a 3 blade R when the funds recover from the engine swap.Thanks for the help.

Hello did you every run your boat with the 2.68:1 and 2 blade super wide prop? If so do you remember the pitch setting and max rpm? Thanks

Fuel pressure shouldn't drop that much at wot. Your engine will run lean and mess stuff up pretty quick

I'm no pro but check your float level. What kind of fuel pump you running?

What size fuel line? How much power is it making? how long are you holding it wot before it drops?

Thanks for the update swamp hunter

Thanks machinestles
I have looked at shark hide. Just couldn't find anyone that had said they used it. I'm up in the air between shark hide and por15 clear cost made for polished metal.

Hello how has your hull held up against the salt water?

Hello. How has your polish job held up? I'm in the middle of doing mine right now. I mostly run salt water. Have you found anything that helps keep it shining after saltwater use? Thanks Josh

Stock roller push rods are 7.200 comp says use 7.300 with retrofit lifters. Most aftermarket heads are +.100 so this should be the one you need to check it
http://m.summitracing.com/parts/cca-7702-1

Went out of yankeetown today from 10am-3pm caught 16 red fish only two under slot size.

http://www.dirtydingo.com/shop/mobile_c ... ?cPath=360
Gear box stays in same place

from what I have read you need the ones the will work for a sbc/bbc to ls engine. eBay has the best prices.

I got two more weekends of hunting then I'll be back to fishing

barhopper wrote:More info please. Coordinates? Pin on google zoomed out some?

Barhopper it's north west of the dump road boat ramp out of yankeetown

This hole is 20' deep back in a creek. Always loaded with reds in the winter http://i263.photobucket.com/albums/ii128/josh_2562/Mobile%20Uploads/C570AC67-CD53-4133-85CF-69FABB93A7A6.png Caught these in about 20 mins out of it a few years ago http://i263.photobucket.com/albums/ii128/josh_2562/Mobile%...

What is the price of the engine????

What does a gto cost over there? You sure the hull is not alum?

If your going to come to Florida or any where else to buy a boat you need to add that expense in to your budget. If you got 10k look for a 8k boat. I don't see a seller lowering his price because your in another state.

You would be doing good getting 40-50mph out of a 15' carmotor/gearbox boat. I built a few mini airboats in the past. By the time your done you will spend almost as much as a normal airboat. What is your budget? Why do you say you need a alum hull? I run a 16' freedom craft in the gulf with out any ...

vanaman machine is also who I used. His prices were better then everyone else I called. He also answered a lot of questions for me while I was building my engine. Very nice guy.