Considering a new hull and am trying to decide between 18x8 and 20x8. I have an 18 currently with a rake and it runs ground well. I would like a little more room. Would I be giving anything up by adding 24” to the hull? What’s your opinion? 18x8.5 would be my choice and I have John built it locally...

I have Garmin echomap95sv with a local Alaska topo map card.


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

I used a pushpull cable with a Custom bracket.
Link below.


https://www.mooreparts.com/throttle-bod ... a90118.jpg[/IMG]


Sent from my iPhone using Tapatalk

For Ls go with Dave at water thunder. Money best spend. I have over 150 hours on my motor I bought this spring. Not one issue. I was that guy doing the same thing. So glad I went with his motor. pushes my Alaska airboat everywhere I point it and sips the fuel with 87octane https://uploads.tapatalk-c...

Best way to talk with Dave at water thunder is call him or Tex. He replies back quickly I have a 418 being built as we speak. His customer service has been excellent. I paid for my motor 4 weeks ago and motor is built were waiting on oxbox. Everything has be done on timeline we agreed on. Can’t be m...

What I have learned is only order directly from the supplier. Or with airboat builder that pumps out over 100 boats a year. No little shop using the next guys money to finish last months deal.

Alway order directly!






Sent from my iPhone using Tapatalk

JordanB wrote:What has worked best for you getting boat off trailer without water? Dry land and or with ice and snow covered ground all experiences would be great to hear?

Put your truck in reversing and slam on your brakes mine shoots right off the trailer.


Sent from my iPhone using Tapatalk

Basin_Runner355 wrote:What rpm with what reduction

5400rpm with ch3 2.3.1...


Sent from my iPhone using Tapatalk

Basin_Runner355 wrote:What pitch setting you onnwe judt put a 2 blade on my buddy’s boat and he only at like A15 pitch setting. And he has the regular wisper tip 2.0

I would have to look. The marks were so small I just used a smart level!


Sent from my iPhone using Tapatalk

I have ex wide 3 blade 80inch on my Alaska Airboat 330hp went everywhere I needed to.


Sent from my iPhone using Tapatalk

Not as narrow as your mind...it’s 4 ft wide at the rear and that’s the norm for MINI boats. If, coulda, woulda, possibly...blah, blah, blah. Helicopters, airplanes,cars and carnival rides all have the same problem when crashed. Still use all of those. I’m still waiting to see how it does too. Mainl...

So, does anyone have a real review based on their experience with a whites performance airboat 540? Or have ridden with somebody who runs one? Anything? Pull trigger most likely last you a long time. Plus a new set 4 blade super wide sensenich. You have a bank climber. Heck if they can get built by...

I know this subject is taboo but, I am looking for what people are experiencing in fuel burn rates. Everyone always talks about how many factors there are and how difficult it is to determine so... what is YOUR experience? If you were to take the boat out and cruise for 1 hour, how many gallons of ...

I know this subject is taboo but, I am looking for what people are experiencing in fuel burn rates. Everyone always talks about how many factors there are and how difficult it is to determine so... what is YOUR experience? If you were to take the boat out and cruise for 1 hour, how many gallons of ...

bkmail wrote:Finishing touches to wrap this one up and get to customer

2 more right behind it.
Bk


Sent from my iPhone using Tapatalk

Good looking sled Brian.


Sent from my iPhone using Tapatalk

Garmin inreach never leave home with out it.


Sent from my iPhone using Tapatalk

Rbode wrote:I am looking for any leads for an airboat transporter or guide for a Caribou hunt this August 2018. AK GMU 20 or alternative suggestion...

http://bearlywounded.com/



Sent from my iPhone using Tapatalk

Order a 502 from skip white performance and have no worries about nothing you’ll have all torc and power to spin 4 s blades. I spec out one there motors this winter about 800 in shipping to Alaska and little over 10k for drop in motor. https://uploads.tapatalk-cdn.com/20180511/eacf1a77c6d9a507dadb4f...

Talked to Dave a couple weeks ago. Priced out lsx 440 was just little over 20k with all goodies. Great guy to talk with.


Sent from my iPhone using Tapatalk

Here is one of a new air ranger.




Sent from my iPhone using Tapatalk

If this happened in Alaska we already had your boat back up and running.

Hey Bud. It took me 3 trips to fill our tags. There river is easy first 10 miles. Pretty much like the upper river. Then you have pick your way thru rocks/ boulders. Rocks start out small and end watermelon size. I only hit one rock bad and it launch us pretty good. I was really happy with my boat I...

Looks like a great trip. Next year ill be making that trip.

Hey guys any of you been down river from the maclaren river lodge. Me and the wife are heading out next wed. To fill our caribou tags. I've always done the hunt with my four wheeler but now that I have the airboat I'm going to use it. Thanks Mike