I am running a 455 Buick with a edlebrock 600cfm and swinging a 72 super snapper pretty well and I have timing set to 32* and an idle 11* and it’s more responsive and better on fuel than my 650cfm Holley vacuum secondary I had on it and I tuned it to maintain 480* exhaust temperature at wide open th...

Only thing is you will have to pull the shaft out of the distributor to clearance the advance slot on the top of the shaft in order to get the 19 degrees of mechanical advance or take it to a race shop and let them know what your trying to achieve and most speed shops can customize the distributor f...

I generally set base @ 13 degrees on my Buick and it hits 32 degrees before 1500 rpm and I don’t care if it’s at 90 outside or 220 the engine fires right up


Sent from my iPhone using Southern Airboat

All this hoopla about what works best all depends on trailer design and height and driver comfort along with enough power to climb the trailer that is


Sent from my iPhone using Southern Airboat

At least 8 years on my steel trailer with drop axle and no broken welds or bent axle and all I have is 2 2X6 bunks and a piece of 2” pvc on the rear of the trailer around a piece of pipe and she goes on with ease even for a direct drive


Sent from my iPhone using Southern Airboat

Never seen anyone properly rebuild the filter housing with success. The filter housing from GM isn’t that expensive depending on year model. I would install a FASS fuel system on the truck and never look back. And a P0087 code is low rail pressure caused by lack of fuel to the injection pump or pump...

Wouldn’t mind having that box on my Buick let me know if you decide to go a different route


Sent from my iPhone using Southern Airboat

Uhairball that is definitely way far out. I'll be to old to drive or dead before that happens. Also there will ALWAYS be older vehicles around no matter what. I won't even by the new diesel trucks because of the regeneration crap. Anything newer than 06 is crap in my opinion. That’s why there is gu...

If the oil lines are after the sensor in the oil plumbing of the engine then you are only restricting cooling effectiveness of the cooler with smaller lines and increasing the flow to the cooler with larger lines but not gonna effect the engine oil pressure if I am wrong please correct me but if you...

https://www.time-sert.com/


Sent from my iPhone using Southern Airboat

Look up time sert for the correct thread pitch and diameter and put one in don’t use helicoils they’re made from spring steel timeserts are a solid one piece design and don’t fail


Sent from my iPhone using Southern Airboat

Merry Christmas to all my friends and family here on the site and stay safe on this crazy time of year


Sent from my iPhone using Southern Airboat

Well 2 guys from the kids softball team supposed to ride out with me Sunday morning so if they make it I will see if we can get the platform stationary again


Sent from my iPhone using Southern Airboat

Instead of flat side towards river their is point towards river


Sent from my iPhone using Southern Airboat

Looks like she was turned 90 degrees like a clock


Sent from my iPhone using Southern Airboat

Damn high waters have turned the tent platform 90 degrees and has it of its rockers and she is a little weeble wobble now have to get a few boys out there to put it back in place.


Sent from my iPhone using Southern Airboat

Definitely up this was at 1 pm today at the cabbage


Sent from my iPhone using Southern Airboat mobile app powered by Tapatalk

That's Monday at the cabbage


Sent from my iPhone using Southern Airboat

Sent from my iPhone using Southern Airboat mobile app powered by Tapatalk

Drove down 95 today and all you can see is the grass on both sides of where the road is supposed to be and water everywhere else definitely lake coming at least 30 foot street side of the fence most of the way down to Rockledge by 95


Sent from my iPhone using Southern Airboat

At least I tried but it wasn't an option so had to vote no


Sent from my iPhone using Southern Airboat

Voted hell no


Sent from my iPhone using Southern Airboat

Lost power for about 20 hours but no big deal worst thing is roof on my shed blew off and landed right behind shed so a little wood work to fix it tomorrow


Sent from my iPhone using Southern Airboat

Get the idle mixture set right and set the idle rpm and go from there but also once that is done check to make sure your throttle plate is closing completely or it can cause this also. Which is the reason they started putting idle solenoids on carbs in cars in the 70's so when you had engine loaded ...

Thanks bud. Hunkered down here in brevard looking to get much less than the Bay Area stay safe


Sent from my iPhone using Southern Airboat