send me a price and info i prob be interested in a gearbox

yes I am looking for a used belt drive for my sbc does anybody know where I might be able to find one I have a 16ft aluminum hull I currently run direct drive just bow fish with this boat don't have to run dry I looking at finding out what would be a good reduction and also where I can find a decent...

I use markel and I have to look at my statement I cant remember what it is bc it is auto draft but it is supper cheap

if I was gonna build a stoker I would stroke a 400 more ci if you are set on running a sbc

there is no replacement for displacement is the way I always look at it

haha I don't need to run dry plus my boat is a barge is why it will never run dry direct drive I knew it when I built it but all I do is bowfish with it and kill just as many fish if not more then the ones with a reduction haha fish are in water not land we live in Arkansas not much here to run dry ...

I run a 72 whisper tip and like it due to it is quiet but pushes well I run a big boat a lot of people told me it wouldn't work when building it but now that it is done and will run beside their gear boxes down the river they don't mouth much now we bowfish a lot it will not run total dry ground but...

yes it will be a belt drive it is the wide 72 I got not narrow but if I ran this prop it would just have to work a short time until I could get a bigger one
also know any good places that sell refurbished belt drives ?

hey guys I am new somewhat to airboats I have a direct drive right now with a 72 whisper tip and was thinking about buying a 2:1 belt drive would this prop work with the belt drive for a little while until I get a bigger prop
thanks
Jonathon

i run a 72 whisper tip on a direct drive 350 and it pushes real good I hear the 74 ngq would do better what is yalls thought on this would it help to upgrade or stay where I am at

there is a few of these boats here in Arkansas and I have to say they are very well built and nicely set up

thanks

looing for contact info for the guy that sells frog spit slck bottom I need some for a 16x9 aluminum boat thanks for any info or If there something that would be better for my application

I run a 72 wisper tip wide blade I would check you tack with another one an see if they compare and like I was told set your rpms around 2800 bc when you get on plane you will gain rpm wot

a stock starter should start that motor with ease mine works just fine with that compression ratio if you think it is timing them unhook the wire to ur distributor and try that see if it turns over any better I am gonna say you prop have bad connection somewhere or a bad starter maybe

i fish with 3 and gear every weekend it jumps right up on plane and run 30 mph loaded this is in deep water on river and that was not wide open at 30 idk if it bc it so wide it helps jump on plane but it does good for a direct drive I think anyways and yes I in Arkansas

so with the right cooler they will idle for several hrs bowfishing with no problems ? that my only prob also would it be enough motor for a 16x9 airboat aluminum

I run a sbc on a airboat but can get a fresh rebuilt o540 I was wondering if they anygood for bowfishing or if they get hot too easy from the idling around also was told didn't have to run aviation fuel could run pump is this correct I was thinking you had to run aviation for the octane but may be w...

well I messed around with motor re adjusted carb and gaped plugs and then re pitched prop to turn 2900 and it seems to run good I got prop at the 11 mark with B settings it a 16x9 aluminum direct drive 350 and as of now I can hit 38 mph so is this pretty good for this size of boat?

it is a 72 regular it is wider one it a strong built motor i know it jist a direct drive it wont run dry but it will run mid an anywhere a sign of water is haha i havent ever seen any fish on banks anyways lol

I have a 350 direct drive with a 72 whisper tip prop I have it set to where my max rpm is 2500 will I gain anything to take pitch out and up rpms or leave pitch where I am at an turn less rpms I ask in regards to hope somebody has played around with this and would know before I go to adjusting a lot...

i willing to travel as well keep me updated i will talk to the guys around here

any bowfishers from arkansas on here lookn for new people to hunt with sometimes i in northwest part of arkansas right om arkansas river bank

i am from northwest part of arkansas idk where u at bit if close count me in on a ride there some boats here in my area

yes bowfishing is my only way of life haha i thinking aboit building a light weight sound box to force sound out back am see if that helps