Search found 8 matches

by Swampbuggy
Sun Nov 20, 2016 10:36 am
Forum: Aircraft Power Only
Topic: No Alternator Juice
Replies: 14
Views: 2314

Re: No Alternator Juice

All you need is a one wire chevy alternator
by Swampbuggy
Wed Jul 06, 2016 5:36 pm
Forum: Automotive Power Only
Topic: loss of power 454 need advice
Replies: 51
Views: 6502

Re: loss of power 454 need advice

If you have a water sep filter check it real good I have had the close up
by Swampbuggy
Wed Jul 06, 2016 5:34 pm
Forum: Automotive Power Only
Topic: loss of power 454 need advice
Replies: 51
Views: 6502

Re: loss of power 454 need advice

It still sound like a bad power valve
by Swampbuggy
Wed Jul 06, 2016 5:33 pm
Forum: Automotive Power Only
Topic: loss of power 454 need advice
Replies: 51
Views: 6502

Re: loss of power 454 need advice

I would check the power valve in the carb - Is it vac secondary then take all the plugs out and be careful the motoer well move take your compression gage end and put it in set you air at 15 to 20 psi and plug it up the propis going to move so be careful that should tell you if there is bad cyd or cam
by Swampbuggy
Mon Jun 27, 2016 6:22 pm
Forum: Prop Talk
Topic: 68 NGQ PITCH & RPMS
Replies: 7
Views: 3121

Re: 68 NGQ PITCH & RPMS

Well old school is 2800 on everything But to do it right take the S/N off the motor go to there web and look it up. My 520 is 2650 - my 470 is 2800 - and the 320 is 2750 and thats was where they run the best
by Swampbuggy
Fri Jun 24, 2016 6:23 am
Forum: Mini-Airboats
Topic: Weight of airboat please.
Replies: 11
Views: 3320

Re: Weight of airboat please.

gatorglide.com Sound to me weight and motor a just ment
by Swampbuggy
Wed Jun 22, 2016 7:16 pm
Forum: Aircraft Power Only
Topic: 520 Contential, no oil pressure
Replies: 16
Views: 2513

Re: 520 Contential, no oil pressure

With brake in oil mine run 60 psi cold hot idle was 30 - Now cold is 80 idle at 180 running temp Idle 30 running 65 to 70
by Swampbuggy
Sun Jun 12, 2016 7:34 pm
Forum: Automotive Power Only
Topic: Adapting sending units and gages on my new engine
Replies: 5
Views: 1474

Re: Adapting sending units and gages on my new engine

We use a short pipe and a 45 so that the sending unit at a angel

Go to advanced search