Search found 69 matches

by rm220
Thu Aug 04, 2011 6:39 pm
Forum: Airboat Talk
Topic: Dumb Question.
Replies: 17
Views: 2053

Re: Dumb Question.

You can put in at Orange lake. It's in Citra 10minutes north of ocala, you can run all night long just stay out of Lake Lochloosa after 7:00. I don't even think you can get into Lochloosa from orange via Cross Creek it's to low. But Orange Lake is some good running @ Night.
by rm220
Mon May 30, 2011 9:42 pm
Forum: Aircraft Power Only
Topic: 220 Parts
Replies: 3
Views: 601

Re: 220 Parts

I'm located in Ocala,Fl
by rm220
Mon May 30, 2011 7:38 pm
Forum: Aircraft Power Only
Topic: 220 Parts
Replies: 3
Views: 601

220 Parts

I need some parts for a 220, rocker cover gaskets (6),exhaust header gaskets(6),intake tube orings(6), cone bushings(6). and (6) silicone intake tube to intake connectors.Thanks
by rm220
Wed May 11, 2011 10:12 pm
Forum: Aircraft Power Only
Topic: Correct Plugs ?
Replies: 3
Views: 626

Correct Plugs ?

Can somebody tell me what the correct sparkplugs to use on a stock ground power. Are they like d-16 ? And do u have to use the brass washer under the plug. Thanks
by rm220
Thu May 05, 2011 10:09 pm
Forum: Aircraft Power Only
Topic: Tac for GPU
Replies: 2
Views: 422

Tac for GPU

I need to know where to get a tac for a gpu 220 Thanks
by rm220
Fri Apr 29, 2011 6:31 pm
Forum: Airboat Talk
Topic: Engine Delivery
Replies: 3
Views: 947

Re: Engine Delivery

Thanks Dominator but i think Junior 480 is going to do it. I appreciate it.
by rm220
Thu Apr 28, 2011 9:29 pm
Forum: Airboat Talk
Topic: Engine Delivery
Replies: 3
Views: 947

Engine Delivery

Is there anybody down in Davie that is comming up north toward Ocala, Fl that would be instrested in picking up a small 4 cyl motor in Davie and dropping it off in ocala 4 some cash. Thanks
by rm220
Wed Apr 06, 2011 8:27 pm
Forum: Airboat Tech
Topic: Step hull Question
Replies: 2
Views: 575

Step hull Question

I am in the process of buying a aluminum step hull and i need to know how they ride? I have never owned one,and i would like to get some input before i buy. Have always owned open fiberglass hulls. Do they slide,are they pretty free riden hulls? Thanks for any input. It is a 12'7'' x 8 Plan on putti...
by rm220
Sun Apr 03, 2011 7:07 pm
Forum: Airboat Tech
Topic: help!
Replies: 3
Views: 748

Re: help!

It is the through bolt that goes from one side of the block to the other.You have to hold the other side to get it off. Most of the time the whole stud will come out with the nut still on one side.
by rm220
Wed Feb 09, 2011 8:15 pm
Forum: Airboat Tech
Topic: quick slick sold near Gainesville?
Replies: 11
Views: 1300

Re: quick slick sold near Gainesville?

Gto on 326 right by the interstate 20m from you.
by rm220
Wed Feb 02, 2011 6:34 pm
Forum: Airboat Tech
Topic: Hull ?
Replies: 3
Views: 668

Hull ?

Can anybody tell me what kind of hull that is on the pics on top of this page The pic is called 0000. And can u get it in a 12' Thanks
by rm220
Tue Jan 25, 2011 5:01 pm
Forum: Airboat Tech
Topic: Warp drive blades
Replies: 4
Views: 888

Warp drive blades

What is the best way to cut down warp drive blades? And how do you correctly set the pitch. Thanks in advance.
by rm220
Fri Dec 31, 2010 5:56 pm
Forum: Airboat Talk
Topic: POS Ford excursion powerstroke
Replies: 29
Views: 2053

Re: POS Ford excursion powerstroke

I don't know but i have had nothing but fords. They have all had there bads just like any other makes. I now have a 2002 powerstroke 4 door 4x4 it just turned 300,000 and still has original tranny and turbo.Runs like it was brand new. I run nothing but synthetic oils and do the work myself. now my g...
by rm220
Tue Dec 28, 2010 6:38 pm
Forum: Aircraft Power Only
Topic: 0290 $$$$
Replies: 6
Views: 879

0290 $$$$

I have a 0290 and i was just curious if any body could tell me what its worth ballpark. Its pretty clean has starter,alt,flywheel,mags,headers.It has everything to bolt up and go. It run when it was taken off boat. I need to know so i can put it in the classifieds
by rm220
Wed Dec 15, 2010 8:30 pm
Forum: Aircraft Power Only
Topic: lycoming 160
Replies: 6
Views: 1016

Re: lycoming 160

I to am wanting to put a turbo on my 0320. I have seen new turbos on ebay for a 4 or 6 cyl with external wastegate for around 200.00 How could it possibly go over around $500.00 to make it work, if you fabricate every thing yourself. and what do you have to do to the updraft carb m4-5 for forced air...
by rm220
Mon Dec 06, 2010 6:41 pm
Forum: Aircraft Power Only
Topic: still have a little bounce in deep water..(help)
Replies: 22
Views: 1643

Re: still have a little bounce in deep water..(help)

Talkin about Quick slick man that stuff is every bit of what it says. I put it on about 2 months ago and was comming back in wasn't use to the new bottom and slammed into a dock it was like it was on skates it just wouldn't stop totaled the one side which i just rebuilt but man that stuff is slick 1...
by rm220
Sat Sep 11, 2010 10:09 am
Forum: Airboat Tech
Topic: Got a ticket on the water, need some feedback
Replies: 46
Views: 6581

Re: Got a ticket on the water, need some feedback

Well it's like this the Economy is extremly week right now and they need the funds. You can try to take it to court, and if the officer shows up you would have wished you paid the ticket because you will have to pay all the court cost as well. I hate to say it but just suck it up and pay the ticket....
by rm220
Mon Sep 06, 2010 9:48 pm
Forum: Site Related
Topic: Uploading pics
Replies: 6
Views: 1086

Uploading pics

Why cant i upload any pics? It keeps saying the max i can upload is 215 KIB its only some text and i picture. Do u have to be a sight supporter to upload pics on the Forum? I was trying to upload a pic of the boat i just built. Thanks.
by rm220
Thu Aug 12, 2010 9:45 pm
Forum: Aircraft Power Only
Topic: Up Draft Carb
Replies: 9
Views: 1108

Up Draft Carb

I have an 0320 angle vave and a 4-5 updraft carb. First of all i think it's two big for that motor, because it loads up and blows pure black smoke when u jump on it. And how do u know where to adjust the lean out screw on the carb. If carb is 2 big would anybody be willing 2 trade me out for a 3. Th...
by rm220
Mon Jul 26, 2010 1:24 pm
Forum: Aircraft Power Only
Topic: DID I ASK TOO MUCH????
Replies: 33
Views: 2773

Re: DID I ASK TOO MUCH????

I do Air conditioning & Refrigeration If u do somebody a favor and give them to much of a break on price they will be the first ones to bi**h about everything. If it's an average everyday price you will probably never hear from them, I give people breaks all the time because i know its a tough econo...
by rm220
Sun Jul 18, 2010 10:09 pm
Forum: Airboat Talk
Topic: Frog spit
Replies: 1
Views: 367

Frog spit

Where can i buy some Frog spit or Quick slick and how much is it a gallon? Thanks i'm out of ocala
by rm220
Sat Jul 17, 2010 10:39 pm
Forum: Airboat Talk
Topic: Bad Day
Replies: 23
Views: 1854

Re: Bad Day

How did the boat go under water unloading on a steep ramp did u still have the back transom straps still attached? What ramp was it? U want to see a steep ramp go to orange lake public ramp when its wet. Glad nobody was hurt. Never mind about the straps i should have read the post a little closer my...
by rm220
Sat Jul 17, 2010 6:03 pm
Forum: Airboat Talk
Topic: Home Electric Help Needed
Replies: 15
Views: 1413

Re: Home Electric Help Needed

If you have an open neutral in the bedroom circuit alone it's the feed check the bedroom cicuit fom the main panel and do a continuity test on the bedroom cicuit neutral. Say one recept is bad with a bad neutral The rest down the line will show bad they will read an open neutral as well. If they all...
by rm220
Sat Jul 10, 2010 10:02 pm
Forum: Aircraft Power Only
Topic: Stainless mufflers
Replies: 6
Views: 884

Stainless mufflers

Can somebody tell me who was selling those little stainless mufflers on here a little while back. Thanks
by rm220
Mon Jul 05, 2010 8:42 pm
Forum: Aircraft Power Only
Topic: welder any body have a small one for sale thanks
Replies: 3
Views: 654

Re: welder any body have a small one for sale thanks

Goatwing2 I would like 2 purchase the Miller 140 mig or the 120 Hobart How much? Pm me Thanks

Go to advanced search