Search found 379 matches

by FISHSTICKER
Fri Sep 18, 2020 9:05 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Made a ride today. Only making about 14-16 psi boost. RPM'S right now top out at 4400-4500....then the ECU pulls it back to 4200 with the way it's currently pitched and tuned. It planes off in deep water in about the length of the boat with two people. Pulls very hard. It will break dry ground in ta...
by FISHSTICKER
Mon Aug 10, 2020 8:06 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Unowho thank you for getting me that number brother. I will call and see if I can talk to him tomorrow. I have not tried Trifecta.
by FISHSTICKER
Sun Aug 09, 2020 1:39 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Not giving up yet Chuck but I am making an alternate plan for about 500HP and 4 more cylinders :D . I'm not saying that if someone offered me a fair price for my motor, gearbox, and other junk that I would not be tempted to take it..........
by FISHSTICKER
Sat Aug 08, 2020 8:53 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Could not get Jerry to return my call or email. Mitch is looking at the E39A and 2014 regal.
by FISHSTICKER
Sat Aug 08, 2020 7:39 pm
Forum: Airboat Tech
Topic: Stossel Palm Beach Hull Riveted Rake Cap Replacement
Replies: 16
Views: 1499

Re: Stossel Palm Beach Hull Riveted Rake Cap Replacement

Damn looks like you had some 3rd graders working on your shit. Call me if you need some help.
by FISHSTICKER
Sat Aug 08, 2020 7:30 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Update. Tried several combinations from the Dakota Digital unit to get a speed signal to be read by the E80 to no avail. Mitch has been hanging in there with me trying a bunch of different tricks to try to get it to quite power limiting us. As of today the E80 is still winning. Not going to lie I ha...
by FISHSTICKER
Thu Jul 16, 2020 11:41 am
Forum: Automotive Power Only
Topic: Ecotec I4 engine identification
Replies: 41
Views: 4380

Re: Ecotec I4 engine identification

GM discontinued the standalone ECM and harness for the LTG. I tried to order one a few months ago. It was discontinued in December or last year. You may still see if listed for sale on a few sites but there are none out there. I tried for 3 weeks to find one.
by FISHSTICKER
Mon Jul 13, 2020 5:58 pm
Forum: Automotive Power Only
Topic: Ecotec I4 engine identification
Replies: 41
Views: 4380

Re: Ecotec I4 engine identification

I don't know if the E69 will work with the LNF or not but I think one of the proven ECM'S is the E39A with the appropriate harness. I would follow one of the proven recipes. I was smart and tried something a bit different on my LTG .....the E80...... and it still is not working right. My fall back p...
by FISHSTICKER
Thu Jun 11, 2020 12:51 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Damn! I did not think about the tac signal. Mitch has that wire in the harness labeled so its easy to find and get to. Will that be a 5v signal?
by FISHSTICKER
Thu Jun 11, 2020 12:48 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

br,lc,LA, when you recommended it I was still in denial about the pump I had not being able to suck thru 6 " of hose with its inlet only 4" above the fuel level in the tank. After Brent recommended it and told me how common of a problem he felt it was I said well hell that's a simple $60 solution an...
by FISHSTICKER
Thu Jun 11, 2020 12:33 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Gator its a 3 hose return style. A bit more progress made. Added a Carter high volume low pressure pump to feed what was my first stage pump. Now I can hold the rpm at 4000 with no fueling issues. The mechanical gauge on the fuel pressure regulator does still drop about 5 psi but stabilizes and hold...
by FISHSTICKER
Wed Jun 03, 2020 6:57 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

I did clean the fuel tank before I installed it. It was very clean as delivered. I have an external pump mounted so that the inlet (bottom of fuel pump) is about 3" above the top of the fuel tank. My tank is short. Only about 10" tall. I do not have a pre-filter on the pump. I have a filter immediat...
by FISHSTICKER
Tue Jun 02, 2020 9:44 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

I still think I have a problem before I get to the high pressure pump. I would not think the fuel pressure at the regulator would drop from 75 to 60 psi.....and thats when it starts to mis and I let off the throttle. Regulator is 6 inches from the high pressure pump.
by FISHSTICKER
Tue Jun 02, 2020 9:40 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Didn't think about the possibility of air in the high pressure fuel rail. I'll see if I can check that out.

There is a baffle across the tank. I told Diamond Back to plum the return to the bottom but did not verify it was. I'll do that too.

Thanks for the info.
by FISHSTICKER
Tue Jun 02, 2020 9:13 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Well........................my fuel rail pressure starts dropping like a rock at about 3800 rpm. Commanded is 2900 psi and actual is 2900 psi for a while and then starts falling off quickly. At the same time my pressure gauge at my fuel pressure regulator starts at 75 psi(where I currently have it s...
by FISHSTICKER
Sat May 16, 2020 9:22 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Not yet. I'm in research mode. Looking at a few different options. Once I get it working I'll give you guys the details.
by FISHSTICKER
Wed May 06, 2020 10:09 pm
Forum: Airboat Talk
Topic: Prop & Gear Box Ratio Recommendations
Replies: 12
Views: 1953

Re: Prop & Gear Box Ratio Recommendations

Fine boat for sure. PistolPete. I sent you a PM. If you have a few minutes I'd like to ask you a few questions.

Thanks
Eddie.
by FISHSTICKER
Mon Apr 27, 2020 10:34 pm
Forum: Automotive Power Only
Topic: Ecotec b207r build
Replies: 3
Views: 564

Re: Ecotec b207r build

One picture? What the hell! More details please.
by FISHSTICKER
Sat Apr 25, 2020 7:04 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

It did. I sent him the file back with some data I collected running it and the fault code list. I’m going to harass him Monday. We are drinking beer and riding this weekend😎
by FISHSTICKER
Sat Apr 25, 2020 9:31 am
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Dear Gatorlicker:

I can't wait to come ride with you Florida rednecks we are going to have some fun.
by FISHSTICKER
Fri Apr 24, 2020 6:26 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Image
by FISHSTICKER
Fri Apr 24, 2020 6:25 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

OBDII issue resolved. But she is in limp mode. Waiting on Mitch to get back to me. Still could not resist putting her in the water to see how she floats. No leaks. Sits about 1.5” deeper than i I predicted.Image
by FISHSTICKER
Thu Apr 23, 2020 9:36 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Image
by FISHSTICKER
Thu Apr 23, 2020 9:35 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Image
by FISHSTICKER
Thu Apr 23, 2020 9:34 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 514
Views: 54510

Re: ECOTEC 2.0 LTG SWAP

Still have a few odds and ends to do. Terminate wires for the flood lights, bilge, install number panels, running lights..... check tune and pitch the prop. She’s running. I have a OBDII communication issue which could be the $30 devise or a loose wire.
Image

Go to advanced search