Search found 351 matches

by lanny haff
Mon Jan 28, 2019 6:22 pm
Forum: Airboat Talk
Topic: Dan the airboat man
Replies: 6
Views: 1075

Dan the airboat man

What ever happened to him? He was a good dude!
by lanny haff
Sun Jan 27, 2019 11:17 am
Forum: Airboat Talk
Topic: Lets hear about your first boat
Replies: 39
Views: 4759

Re: Lets hear about your first boat

11 ft fiberglas hull with a 305 pontiac. It got up on a plane but wasn't very fast. I wound up keeping the rigging cage rudder and engine stand. Got a new hull and sbc and had a fairly decent boat which I totally enjoyed. That was back in the early 80s about 5or6 boats ago. But I made a lot of friie...
by lanny haff
Sun Jan 06, 2019 10:55 am
Forum: Airboat Tech
Topic: How do you bend the hoop for your cage?
Replies: 33
Views: 6879

Re: How do you bend the hoop for your cage?

I heard there were airboat shops that sell hoops all ready bent for reasonable prices. Does anybody know of one in W.palm beach area?
by lanny haff
Fri Dec 16, 2016 11:52 am
Forum: Buggy Talk
Topic: Console and towers
Replies: 2
Views: 1705

Re: Console and towers

If your still looking a guy randy makes some nice stuff in wpb
by lanny haff
Sun Jul 03, 2016 1:47 pm
Forum: Aircraft Power Only
Topic: broke exhaust stud
Replies: 13
Views: 1613

Re: broke exhaust stud

No water in my gas tank i drained and cleaned it out. Before i left but did not replace the water separator thats why i bye past it out in the swamp n drained the carb bowl and when i started it up after sitting the fuel line straight from fuel pump was put in a gallon can to prevent trash pickup
by lanny haff
Sun Jul 03, 2016 1:45 pm
Forum: Aircraft Power Only
Topic: broke exhaust stud
Replies: 13
Views: 1613

Re: broke exhaust stud

No water in my gas tank i drained and cleaned it out. Before i left but did not replace the water separator thats why i bye past it out in the swamp n drained the carb bowl
by lanny haff
Sun Jul 03, 2016 11:46 am
Forum: Aircraft Power Only
Topic: broke exhaust stud
Replies: 13
Views: 1613

Re: broke exhaust stud

Boat sat a year n half prior but started right up n ran fine on trailer
by lanny haff
Sun Jul 03, 2016 11:43 am
Forum: Aircraft Power Only
Topic: broke exhaust stud
Replies: 13
Views: 1613

Re: broke exhaust stud

Well i had billy kline fix my broken exhaust stud and a new rear seal great guy all I can say so last night I took the boat out it had a problem ideling so i took it out to see if it would clear up no luck ran fine at regular speed well i shut it off disconnected the water seperator n it cleared up ...
by lanny haff
Thu Jun 09, 2016 8:19 pm
Forum: Aircraft Power Only
Topic: broke exhaust stud
Replies: 13
Views: 1613

broke exhaust stud

Can anyone give me any pointers on getting a broken exhaust stud out i tried heat n vise grips no luck thanks lanny
by lanny haff
Sun Apr 10, 2016 10:01 am
Forum: Aircraft Power Only
Topic: Question about how to price a airboat for sale
Replies: 25
Views: 3108

Re: Question about how to price a airboat for sale

Check out his photo gallery he goes way back here on S.A long before most not a dumb !!! By far
by lanny haff
Tue Nov 17, 2015 10:04 pm
Forum: Aircraft Power Only
Topic: Headers
Replies: 4
Views: 904

Headers

Can anyone tell me the easy way to get header bolts loose.I already broke one off its a 4cylinder lycoming and is there a special socket for inside bolt.
by lanny haff
Thu Nov 12, 2015 11:44 am
Forum: Airboat Talk
Topic: AV Gas around Loxahatchee
Replies: 2
Views: 356

Re: AV Gas around Loxahatchee

Okeechobee rd. and skees rd. Theres a fuel station on the left side of skees rd.
by lanny haff
Sun Sep 20, 2015 3:57 pm
Forum: Airboat Talk
Topic: Custom Table for acution all proceeds will go to Dusty
Replies: 10
Views: 2119

Re: Custom Table for acution all proceeds will go to Dusty

The table was raffled off yesterday at dustys and raised a $1000 dollars and I believe was given to nikki by the winner Thanks everybody and ben is gonna build something else for bryson to be be auctioned off at the kissimee event all proceeds to bryson
by lanny haff
Thu Sep 17, 2015 9:19 pm
Forum: Airboat Talk
Topic: Custom Table for acution all proceeds will go to Dusty
Replies: 10
Views: 2119

Re: Custom Table for acution all proceeds will go to Dusty

The table will be at Dusty's house this Saturday. We're trying to get enough for it to help Bryson's family also. My boy Dustin Haff is going to bring it out. Hopefully I'll see some of there'. Thanks Lanny
by lanny haff
Tue Sep 15, 2015 10:22 pm
Forum: Airboat Talk
Topic: Custom Table for acution all proceeds will go to Dusty
Replies: 10
Views: 2119

Re: Custom Table for acution all proceeds will go to Dusty

Thanks everyone on your bids. The table is very nice and is made from lighter pine and very well built. Thanks again
by lanny haff
Sun Sep 13, 2015 7:08 pm
Forum: Airboat Talk
Topic: Go FUnd me to help Brewster Family
Replies: 19
Views: 2609

Re: Go FUnd me to help Brewster Family

And the Reyes family has a nice table there willing to donate to raise money for the go fund me acct very nice hand made lighter pine table
by lanny haff
Sun Sep 13, 2015 5:40 pm
Forum: Airboat Talk
Topic: Custom Table for acution all proceeds will go to Dusty
Replies: 10
Views: 2119

Custom Table for acution all proceeds will go to Dusty

Hey guys a good friend of Dustys Ben Reyes made this table and is wanting to try n raise some money for dusty. I figured try and auction it or raffle it any suggestions or ideas on making something happen please lend a hand or suggestions
by lanny haff
Sun Sep 13, 2015 12:30 am
Forum: Airboat Talk
Topic: dusty brewsters celibration of life to be held at his house
Replies: 27
Views: 3684

Re: dusty brewsters celibration of life to be held at his ho

RIP DUSTY GONNA MISS YOU BUDDY WITH LOVE FROM YOUR BOYS IN GREENACRES CITY
by lanny haff
Sun Sep 13, 2015 12:17 am
Forum: Airboat Talk
Topic: Tribute to The last Florida Cracker
Replies: 16
Views: 2130

Re: Tribute to The last Florida Cracker

Very Very nice indeed RIP and hats off to steve
by lanny haff
Mon Sep 07, 2015 2:32 pm
Forum: Airboat Talk
Topic: with a broken heart we say goodbye to Florida Cracker
Replies: 64
Views: 5879

Re: with a broken heart we say goodbye to Florida Cracker

This is sad indeed. He was a good un. He]ll be missed
by lanny haff
Tue Jun 09, 2015 9:28 am
Forum: Airboat Talk
Topic: Caught a good one last night off the airboat!
Replies: 9
Views: 2107

Re: Caught a good one last night off the airboat!

Dam good hog bubba did it have its top wetters
by lanny haff
Sat Apr 11, 2015 1:44 am
Forum: Buggy Talk
Topic: JW Corbett 21st annual cleanup.
Replies: 9
Views: 4567

Re: JW Corbett 21st annual cleanup.

Are you aloud to bring a buggy in there for the clean up I was told no unlicensed vehicles. We hunt and trail ride so I'll be out to give a hand
by lanny haff
Thu Jul 17, 2014 2:49 pm
Forum: Aircraft Power Only
Topic: LYCOMING 0320
Replies: 4
Views: 1015

Re: LYCOMING 0320

THANKS lANNY
by lanny haff
Thu Jul 17, 2014 2:17 pm
Forum: Aircraft Power Only
Topic: LYCOMING 0320
Replies: 4
Views: 1015

LYCOMING 0320

How do you tell the difference between a wide deck + a narrow deck 0320 Lycoming? Lanny
by lanny haff
Wed Jul 16, 2014 10:03 am
Forum: Airboat Tech
Topic: 14x7 cottonmouth cant get boat on plane need help please
Replies: 31
Views: 2634

Re: 14x7 cottonmouth cant get boat on plane need help please

IMHO I had a DD boat + I heard all the stories about SBCs, mainly that they don't work very well. The more people told me that the more I got into making my boat run good. TO make a good running motor you need high compression [around 10-1] an RV cam 500rpm-3000rpm + a 70- 34 prop, a trim tab helps,...

Go to advanced search