I've been using the industrial grade black plactic tie wraps. The ones on my boat have been on there for 2 years and haven't failed yet. The tree limbs rubbing against the cage have broken a few, but not many at all. I want use anything else. The Wal-Mart grade have plactic clips to lock the tie wra...

John Fenner wrote:18- 150/ 20 -180, been awhile, wide deck and narrow differ as well.

Narrow deck and Wide deck would be helpful. That way I'd have the info. Some other people might want it also.
Thaks

Measure the bottom of the flange where it meets the case and then to the top of cylinder where the bottom of the rocker cover meets the top of the cylinder. 160= 10 1/2" and a 180 = 10 3/4". Sorry lakerunner I don't know the fin count but a tape measure will also work. Yeah, I knew it was...

A Lycoming 180 (0-360) has more fins in the jugs than a 150 (0-320)...Will someone post the fin count of both types of jugs.
Thanks in advance
Robert

Prayers sent!!

I only live about 10 miles from them..They are really down to earth guys. Mitchell will surely be missed. RIP... I really feel for his brother, they were always together. They were mis-protrayed (spelling).. on TV. I guess TV is just trying to intertain the nation as a whole. They were a little diff...

HAPPY BIRTHDAY...Hope you have a wonderful day buddy.

If you going to ride on of the tour boats, this is one of the best. He is a friend of mine and he will treat you right.

http://www.airboattours.com/

Outlawaircraftengines wrote:O-540 Definitely.

X2, you want regret it!!

Lakerunner wrote:Well looks like we gonna attack the nutria again tomorrow...I'll post pictures later..

We did pretty good. We got 310 this trip. Its all over now til next year.

Well looks like we gonna attack the nutria again tomorrow...I'll post pictures later..

Does anyone have the layout for the bolt pattern for a 0-320 Lycoming (straight mount) I'm building a new motor stand for a 4 cyl and don't have the motor to take the measurements. Thanks in advance. ARE U BUILDING A MOTOR STAND FOR THE BOAT ? I ASSUME U MEAN A STAND TO HOLD THE MOTOR SO U CAN BUIL...

Does anyone have the layout for the bolt pattern for a 0-320 Lycoming (straight mount) I'm building a new motor stand for a 4 cyl and don't have the motor to take the measurements.
Thanks in advance.

Good friend of mine shooting nutria. Me and my buddy also use the Ruger 10/22..Thats a bad little rifle. Love it.


http://www.youtube.com/watch?v=8TU_IZzxNyQ

No, you don't have to own the land, but you do need premission. Also you have to be in the Nutria Control Program or you can't sell them. Here is the link.

http://nutria.com/site10.php

DAISYCUTTER85 wrote:Where does one turn the tails in to?

They have collection stations setup.

Had a good day yesterday. Me and my buddy got 240 nutria...Gonna go back next weekend. Took me awhile, but I finally found a honey hole.

I ran mine at 6 1/2 quarts my oil pressure was 60lbs after she warmed up idk about the cylinder head temps but my oil temp was normally 140 unless I was running really hard it would get up to 160 I'm sorry, i meant oil temp. i am in pilot mode sometimes. thanks for the numbers guys I worry way more...

pipedog wrote:

Lakerunner wrote:Lizard Lick drivers...Might remember us from "Killin N Grillin" a few months back. We were catching big snapping turtles.

Do you know if will there be any new episodes??

No, I really don't know what they are planning

Lizard Lick drivers...Might remember us from "Killin N Grillin" a few months back. We were catching big snapping turtles.

This is one of the producers on set...She is my neice..Beautiful girl



Filming Lizard Lick

were you really getting shot at? I hope that was all staged...if that was real somebody could have been killed you said it was fun so I am going to assume this was a Burt Reynolds "Smokey and the Bandit" except it was on an airboat. :happy1: Burt Reynolds "Smokey and the Bandit"...

emmitt Kelly wrote:Lizard Lick repo. company reposed an airboat in LA in the bayou...there was a lot of drama...
it is a hard show to watch though

Cajun Pawn Stars is a great show

I was driving the repo boat in Lizard Lick, it was fun making that little show..

We got a few this weekend...(1) 10 pt., (2) 8 pts and (5) does