Dear Alligator Harvest Permit Applicant: We regret to inform you that the alligator hunt application you submitted for Phase I may not have been recorded correctly. While preparing for the Phase I random drawing, FWC staff discovered a problem. Active Outdoors, the third party vendor that hosts the ...

I believe, that one on the top is for a oil viscocity valve (spring and plunger type check valve) below the spin on oil filter is the vernatherm. In either case they both have a copper crush washer as stated by the others and may need to be replaced and the housing checked for cracks.

I believe, that one on the top is for a oil viscocity valve (spring and plunger type check valve) below the spin on oil filter is the vernatherm. In either case they both have a copper crush washer as stated by the others and may need to be replaced and the housing checked for cracks.

I agree with Whitebear. My 200 angle valve runs just fine on pump gas, oil temp is 160 and head temp runs 400.

That's my little Hamant boat Jon C posted. I had a hell of a time with it hopping Wade came thru and got me running true "didn't mean to rhyme" but she is real sweet now! If the motor is level and it still wants to hope I would move the rigging forward appx 2 inches test run it and see where you are...

BigDaddy you have to click on the hunt choice to put it in your shopping cart before you try to pay for it. I did the same thing

I just went back to the FWC site and went to the link to pay for awarded permit even though I was not awarded any (came back as no app. found). When the payment page came up it showed I got my first pick I hit the accept button and put in my payment info it took two attempt but it went thru and I ha...

MYDIXIEWRECKED wrote:I GOT DRAWN BUT THE ONLY WAY I COULD TELL WAS TO GO IN AND START THE PAYMENT PROCESS AND THEN IT WILL TELL YOU TO PAY FOR THE ONE YOU DREW...

I tried the same. It showed I got my first pick, when I went to hit the payment send button it said it had timed out and is no longer available.

I just typed my info in and it came back as "not found"tried again and it said "application not found". go figure I printed the form out after I sent it plus I got an e-mail from them stating that they rec'd it.

mcleod0506 wrote:Fwc site says 6-22

If they don't change it again. It was 6/1 to 6/15 with the drawing on the 17th. and payments to made 6/18 to 6/29. Now there not going to release the results till the 22nd?

I don't know, but it seems as if they managed to mess it up again.

Indeed it was a beautiful day on the water, thanks again for the call. Gold, Continental Cracker thanks! I've been running the little A/C a lot

What's the water levels like down that way?

Thanks for the help. I'll give Classic a call

Does anyone know where I can get a electric tach take off for a 200hp lycoming? I currently have a cable operated tach and was thinking of changing it to a electric one (for ease of running the wires). What do yall think, are their any pro's or con's to going electric anad would a 4cyl auto take wor...

Plum
Was the boat still on the trailer? being towed or did you launch it and ride around

Happy "B" day!! Gold, enjoy your day.........

Grant Thanks for posting those pic's. maybe someday I'll remember how to do it. You guy's with your little AC boats have a big advantage over us big boats "15x8" when it comes to the little trails thru the cypress heads, but one things for sure "It WAS A GREAT DAY" and I can't wait to do it again......

I would be up for a ride, sounds like a good idea. How many people do you think would show? When I started my build I could not find anybody that was running a ford motor, I know that GTO was using them but nobody posted here. Anyway it's nice to see some more ford powered boats out their.

Sorry it took so long to post, but it's been awhile for me and....I forgot my password :evil: Here are some more photo's from the ride. I hope I did this right and they show up. http://i173.photobucket.com/albums/w50/raw445/111_1112.jpg http://i173.photobucket.com/albums/w50/raw445/111_1122.jpg http...

Thanks, I'll give'em a call

Looking for a Sensenich 3 blade hub. medium for a 80" prop. Who has the best prices? thanks in advance

Thanks,
Huntnfish87
I tried them, I only needed two bolts they had a minimum order of 10 which would have cost me 40.00 for two bolts. But I will keep it in mind.

I called Turner machine yesterday asking about the bolts, I was told that they had 31 in stock. I drove up their this morning only to find that they did not have the bolts I needed. I went over to Apple and they had no such animal either. I called over to March Performance and they had what I needed...

That's for the help guy's. I found some out of Naple's.