Search found 739 matches

by scottyroll
Mon Jun 03, 2019 8:32 am
Forum: Automotive Power Only
Topic: GM explores new ECU
Replies: 2
Views: 1438

Re: GM explores new ECU

I saw that John Deer started doing that a few years back. I have faith that hackers will always outmaneuver governments and big business though or at least make separate standalone units in this case.
by scottyroll
Wed Feb 20, 2019 2:04 pm
Forum: Automotive Power Only
Topic: Going to have new boat built soon
Replies: 8
Views: 787

Re: Going to have new boat built soon

X2 on the LS3. Especially if you are going to run any saltwater. My family's 502 has some some nasty rust areas for staying out around steinhatchee and pretty much only running salt water when we do take it out.
by scottyroll
Wed Feb 06, 2019 12:12 pm
Forum: Automotive Power Only
Topic: Anyone use a “marine” 350 for DD?
Replies: 11
Views: 2188

Re: Anyone use a “marine” 350 for DD?

I believe I've heard that some marine engines spin counter clockwise. Maybe someone else can confirm.

It would be imperative to know the rotation when selecting a prop.
by scottyroll
Thu Jan 10, 2019 8:44 am
Forum: Airboat Talk
Topic: p0087 silverado duramax
Replies: 16
Views: 1246

Re: p0087 silverado duramax

Google returned that the issue may be low fuel rail pressure (pump issue)?

https://autoservicecosts.com/obd2-codes/p0087/
by scottyroll
Wed Dec 19, 2018 11:46 am
Forum: Automotive Power Only
Topic: Noob engine choices, what makes a good motor
Replies: 7
Views: 896

Re: Noob engine choices, what makes a good motor

I had a 2002-4 6.0 LQ4 and it was a great air boat power plant! If I remember correctly: $1750 for complete engine and harness $175 for harness rework and fuse block $250 headers $200 for intake setup $75 for miscellaneous (delete emissions) Opted for a new starter for piece of mind and ran the Torq...
by scottyroll
Tue Aug 22, 2017 12:53 pm
Forum: Prop Talk
Topic: 5250 vs 5,000
Replies: 18
Views: 2809

Re: 5250 vs 5,000

I personally think that it makes no sense for the average guy with a 2/1 or 2.37/1 to go over the 5,250 number. I was happy running my setup there and would sometimes choke it down to 4,900 if I was just going to be cruising for the weekend. Just change it up when you some time and see if it's worth...
by scottyroll
Thu Jun 01, 2017 4:28 pm
Forum: Automotive Power Only
Topic: Ballistic gear box?
Replies: 2
Views: 964

Re: Ballistic gear box?

Did you call: 785.218.9449

They are usually pretty keen to quick replys
by scottyroll
Wed May 03, 2017 7:38 am
Forum: Automotive Power Only
Topic: Ever wonder why a Top Fuel dragster
Replies: 14
Views: 2534

Re: Ever wonder why a Top Fuel dragster

Great read, Mr. Reid!

Those numbers and the science behind them are just amazing to ponder 8)

Thanks for sharing
by scottyroll
Mon Apr 24, 2017 2:47 pm
Forum: Automotive Power Only
Topic: 350 sbc rebuild or build for more?
Replies: 3
Views: 1090

Re: 350 sbc rebuild or build for more?

I'd say it's a good excuse as ever to go ahead and put some performance parts in your rebuild.

Just do what you feel comfortable with cash wise.

Little things like a cam swap and cylinder head work can make quite a difference for not a lot of coin.

It's all up to you.
by scottyroll
Fri Apr 21, 2017 3:17 pm
Forum: Automotive Power Only
Topic: 4.3 DD Prop
Replies: 35
Views: 4998

Re: 4.3 DD Prop

Also, you may want to check and make sure that the engine is not a counter rotation setup. I've heard that it is sometimes found to be the case at least in dual engine boats where one engine spins clockwise and the other goes counterclockwise (not familiar with the particular one that was mentioned)...
by scottyroll
Fri Apr 07, 2017 11:43 am
Forum: Aircraft Power Only
Topic: Need to find a builder my motor is sitting in Flordia!
Replies: 6
Views: 1113

Re: Need to find a builder my motor is sitting in Flordia!

Tom is the guy for GPU and he is close to plant city. Would probably pick it up for you too.
by scottyroll
Thu Apr 06, 2017 12:01 pm
Forum: Aircraft Power Only
Topic: Gpu backfire and a little gray smoke
Replies: 4
Views: 931

Re: Gpu backfire and a little gray smoke

Are you running unleaded fuel?
by scottyroll
Thu Mar 30, 2017 12:21 pm
Forum: Aircraft Power Only
Topic: Salvage Engines
Replies: 6
Views: 1370

Re: Salvage Engines

digginfool wrote:would it be worth the effort to save a couple grand?
I'd say it would be for just about anybody but you, Diggin :wink:

But man, I can picture the new thread story if you did... :lol:
by scottyroll
Tue Mar 07, 2017 8:07 am
Forum: Airboat Talk
Topic: HAPPY BIRTHDAY COWBOY!!!!!
Replies: 11
Views: 1296

Re: HAPPY BIRTHDAY COWBOY!!!!!

Happy Birthday! Thank you for all that you have shared on this forum.
by scottyroll
Tue Feb 28, 2017 7:19 am
Forum: Automotive Power Only
Topic: LS repower!! Need help
Replies: 10
Views: 2183

Re: LS repower!! Need help

CarMotorBarge, thank you for clarifying for the OP. I mixed up my acronyms lol.
by scottyroll
Mon Feb 27, 2017 11:24 am
Forum: Automotive Power Only
Topic: LS repower!! Need help
Replies: 10
Views: 2183

Re: LS repower!! Need help

...I found a iron 6.0 cheap with low miles but it is a 2014 vct does that matter? From my research and personal experience, you do not want an engine that turns some of the cylinders off via VVT. I had a 5.3 in my GMC Envoy XL and it blew the top end and then the bottom end after the top was fixed....
by scottyroll
Wed Feb 22, 2017 7:15 am
Forum: Automotive Power Only
Topic: DD LQ4 6.0
Replies: 6
Views: 1533

Re: DD LQ4 6.0

I'd let her eat and find out how well she runs. 8) Shouldn't be any worse than the 350 DD. I would use the truck intake manifold. Might also make sense to do a cam change to get a little more torque below 3,000 RPMs. X2 They are good engines. I'm happy with my stock one but I've got a gearbox to su...
by scottyroll
Mon Feb 13, 2017 2:20 pm
Forum: Automotive Power Only
Topic: 11/7 gore 350 or 4.3
Replies: 2
Views: 640

Re: 11/7 gore 350 or 4.3

Probably not much difference in weight between the two so I'd say you are better off with the 350 since it will make more power than the 6 cylinder.
by scottyroll
Thu Feb 02, 2017 3:55 pm
Forum: Airboat Talk
Topic: headers for a small block chevy
Replies: 4
Views: 793

Re: headers for a small block chevy

Alumitech: (407) 423-3431
by scottyroll
Thu Jan 05, 2017 12:35 pm
Forum: Airboat Talk
Topic: Sacrilege?
Replies: 24
Views: 2938

Re: Sacrilege?

unless of course you went with an ecotec package which might come in around same weight as a 540 and possibly more thrust on pump gas. I may be mistaken but I believe there is a thread on here that documents an all Aluminum fully dressed LS weighing less than any fully dressed 6-Cyl AC engine. Howe...
by scottyroll
Thu Jan 05, 2017 7:19 am
Forum: Airboat Talk
Topic: Sacrilege?
Replies: 24
Views: 2938

Re: Sacrilege?

I think it would be cool to see a DD LS on the Don Davis and fitting for an AC to be on the Thurman.

Either way - I'm sure we are in for a bunch of stories regarding the builds and change ups lol
by scottyroll
Thu Dec 29, 2016 4:30 pm
Forum: Airboat Talk
Topic: who is still running a stock [or close to stock] gpu?
Replies: 21
Views: 2556

Re: who is still running a stock [or close to stock] gpu?

terrible ted wrote:You vinyl wraps that the girls have on there tucks. Or on the city bus.
Equally true :lol:
by scottyroll
Thu Dec 29, 2016 3:38 pm
Forum: Airboat Talk
Topic: who is still running a stock [or close to stock] gpu?
Replies: 21
Views: 2556

Re: who is still running a stock [or close to stock] gpu?

terrible ted wrote:Whats a wrap?
I believe he is referring to the "Vinyl Wraps" that you can commonly see on high end vehicles and sport fishing boats now-a-days.
by scottyroll
Thu Dec 15, 2016 7:39 am
Forum: Airboat Tech
Topic: NEW DynaMarine REVO Hull
Replies: 23
Views: 4929

Re: NEW DynaMarine REVO Hull

Hands down the most beautiful looking and modern looking hulls I've ever seen!

One day 8)
by scottyroll
Wed Dec 14, 2016 12:19 pm
Forum: Automotive Power Only
Topic: NEW Build LQ4 6.0L / 2.68 Box / 2 Blade SW
Replies: 49
Views: 14043

Re: NEW Build LQ4 6.0L / 2.68 Box / 2 Blade SW

Only thin is I wanna go the carb route we have no one around me that can mess with the wiring or even the ecm and I figure by the time I send all this off pay the money to convert I'll be cheaper just slapping a 650 double pump on it and calling it good Do what you want but you can probably get tha...

Go to advanced search