Search found 870 matches

by mojoe
Sat Sep 22, 2018 8:26 am
Forum: Aircraft Power Only
Topic: O320 160hp over heating and running rough
Replies: 3
Views: 68

Re: O320 160hp over heating and running rough

is it the right carb with the right jet nozzle?...if its running rough it may just be a mag, plug or wire problem....try a mag drop test at 1800rpm and see if ya got an ign problem...might be a busted impulse spring or carbon track or etc. I recommend paying attention here to this guidance. You sai...
by mojoe
Tue Sep 18, 2018 7:29 am
Forum: Aircraft Power Only
Topic: 0470 overheating and running rough
Replies: 22
Views: 804

Re: 0470 overheating and running rough

One of the great things about this site is the wealth of knowledge available. The trick is identifying it when it is given. You should follow John Fenners advice. Running avgas and making sure timing is right is cheap and simple compared to the damage detonation causes. Avgas not only has higher oct...
by mojoe
Sun Sep 16, 2018 8:59 am
Forum: Mini-Airboats
Topic: Engine tune
Replies: 5
Views: 214

Re: Engine tune

Use a zip tie. Just wrap it around the cage wire so that it “points” toward the trailing edge of the prop. Adjust it so it just touches the trailing edge of one blade. Cut off any excess if necessary. You now have a point of reference. You can add pitch and remove pitch by looking at the trailing ed...
by mojoe
Fri Sep 14, 2018 1:57 pm
Forum: Airboat Tech
Topic: control issues
Replies: 10
Views: 443

Re: control issues

Just wondering if this is on the trailer or in the water? Tabs are usually a fine tuning thing so you can let go of the stick at cruise and she will ride straight. It takes the last little bit of pressure off the stick and makes riding les tiresome. If she is pulling that hard on the trailer, someth...
by mojoe
Thu Sep 13, 2018 1:34 pm
Forum: Airboat Talk
Topic: Warning to all airboats running in C40 upper basin area
Replies: 12
Views: 1012

Re: Warning to all airboats running in C40 upper basin area

I can’t believe it hasn’t happened yet! We have the same scenario up here between 50 and Hatbill.

I have said it over and over: there needs to be flags on EVERY vessel out there.
by mojoe
Thu Sep 13, 2018 12:45 pm
Forum: Airboat Talk
Topic: Warning to all airboats running in C40 upper basin area
Replies: 12
Views: 1012

Re: Warning to all airboats running in C40 upper basin area

I can think of no reason a boat of that description would be regularly running in that area if it weren’t Gator season. Every year it brings out the least common denominator in society to the water. Absolute morons!!

With any luck he wont get his tags filled and never comes back!!!
by mojoe
Sun Sep 09, 2018 8:54 pm
Forum: Airboat Talk
Topic: Aircraft are running out of time lol
Replies: 34
Views: 2405

Re: Aircraft are running out of time lol

Looks like a nice sunrise Turtle
by mojoe
Fri Aug 31, 2018 6:02 am
Forum: Airboat Talk
Topic: Talk to me About Sea Deck
Replies: 13
Views: 963

Re: Talk to me About Sea Deck

I have indoor/outdoor carpet glued down to the front deck. Been there 5+ years. No issues.
by mojoe
Sat Aug 25, 2018 8:29 am
Forum: Hunting & Fishing
Topic: lake monroe wma
Replies: 8
Views: 357

Re: lake monroe wma

The question is, what do you mean by “hunt the boat”? If you mean using the airboat as a way to access places to still hunt, then yes, Monroe and Upper St John’s are exactly what you are looking for. The rule against “herding” makes it illegal to beat the brush in an attempt to jump game, run them d...
by mojoe
Fri Aug 24, 2018 12:55 pm
Forum: Hunting & Fishing
Topic: lake monroe wma
Replies: 8
Views: 357

Re: lake monroe wma

General area regulations: 10. Taking or herding wildlife from any motorized vehicle, aircraft or boat, which is under power is prohibited until power, and movement from that power, has ceased. Dogs: 1. Hunting with dogs is prohibited except bird dogs and retrievers may be used during the general gun...
by mojoe
Fri Aug 03, 2018 4:30 pm
Forum: Automotive Power Only
Topic: dry ground with 350 dd with 300 hp is it possible
Replies: 27
Views: 2593

Re: dry ground with 350 dd with 300 hp is it possible

No but you will run forever on a tank of gas. In my first 350 DD i could run from hwy 50 to the oak head and back on 35 gallons Now it was turning a 7234 paddle to 2700. My old DD 350 turned a 72x40 stick 2850 and would run from Florence to the Oak Head on 7 gals. Never did it from 50 but that esti...
by mojoe
Fri Aug 03, 2018 12:36 pm
Forum: Airboat Tech
Topic: 5200 sealant
Replies: 13
Views: 592

Re: 5200 sealant

KoolSeal is water based elastomeric roof paint. If it works, a silicone roof paint would work even better. Water based elastomeric paints are for roofs that have good drainage. The silicone roof paints are used when there is insufficient pitch and ponding water. Makes sense, if it seals a metal roof...
by mojoe
Fri Aug 03, 2018 6:20 am
Forum: Airboat Tech
Topic: 5200 sealant
Replies: 13
Views: 592

Re: 5200 sealant

Read the MSDS. It will list the hazardous ingredients. If xylene is on the list, try that.

Why?
by mojoe
Sun Jul 29, 2018 7:17 am
Forum: Airboat Talk
Topic: spray mixture
Replies: 14
Views: 1012

Re: spray mixture

It doesn’t matter. A little dew on the ground really makes a big difference compared to long dry runs on a sunny day. Water in the sprayer does a fine job of making things wet (just like a little dew on the ground) and is all you (should) need. Yes, you can feel that soapy water is a little slipperi...
by mojoe
Thu Jul 26, 2018 11:17 pm
Forum: Airboat Talk
Topic: Front or rear driver ?
Replies: 10
Views: 949

Re: Front or rear driver ?

A front driver is great whe you are riding solo. Rear driver is great with passengers.

It’s about balancing the load.

I have owned both and I think I like my front driver better..... probably.
by mojoe
Fri Jul 20, 2018 11:31 am
Forum: Aircraft Power Only
Topic: IO-540 AV w/ electronic ignition plug gap
Replies: 3
Views: 373

Re: IO-540 AV w/ electronic ignition plug gap

If it’s a Pacemaker, the thinner insulator on the Autolite is easier to put on the boot.

X2 .040 gap
by mojoe
Thu Jul 19, 2018 9:51 am
Forum: Airboat Tech
Topic: Higher Cruise Speed! Need Help From The Pros....
Replies: 30
Views: 1467

Re: Higher Cruise Speed! Need Help From The Pros....

I am not a “professional” like those whom you say you have directed this toward. I am though, a person with good common sense and a ton of experience around every type of boat that is common in Florida. I have never met you, but I believe you are an experienced and safe driver. That is not the probl...
by mojoe
Wed Jul 18, 2018 5:33 pm
Forum: Airboat Talk
Topic: New Guy on the Forum
Replies: 4
Views: 362

Re: New Guy on the Forum

Welcome aboard! There are some nice little AC boats with similar power plants. Do some browsing and you will see ideas. As a (very gemeral) rule, you want 1/4hp per lb total weight to run good. If you can keep it small and simple with a total weight around 600lbs before people and gas you should end...
by mojoe
Mon Jul 16, 2018 12:26 pm
Forum: Airboat Tech
Topic: Higher Cruise Speed! Need Help From The Pros....
Replies: 30
Views: 1467

Re: Higher Cruise Speed! Need Help From The Pros....

60 mph is sure not a cruise for an airboat no matter how you look at it. I'm not saying it can't be done. I'm saying it isn't safe. Good luck in your adventure. X2 Anywhere shallow enough (in Florida) to lend itself to the operation of an airboat, it will have vegetation and/or turns that limit vis...
by mojoe
Sun Jul 15, 2018 6:46 am
Forum: Prop Talk
Topic: ISO Sensenich Q to try out
Replies: 92
Views: 2313

Re: ISO Sensenich Q to try out

1) ladyblackwater is 100% correct. A hull that will rock will ride dry better 2) I have never seen a prop change turn a boat that keeps getting stuck into a hill burner 3) As you said, less pitch gives you snap, but you are complaining about dry push. Deano is correct here that pitch = push... but y...
by mojoe
Fri Jun 29, 2018 2:26 pm
Forum: Aircraft Power Only
Topic: Gitsu 0520 Crankcase venting.
Replies: 6
Views: 490

Re: Gitsu 0520 Crankcase venting.

The steel wool is a decent idea to keep mud dobbers out.
by mojoe
Sun Jun 24, 2018 8:11 am
Forum: Texas Airboaters
Topic: Best Lights for Saltwater
Replies: 6
Views: 419

Re: Best Lights for Saltwater

I don’t bow Fish, but I have gigged a lot of flounder and sheepshead. In my experience, water quality has everything to do with it. In the typical murky water we have around here, nothing beats submersible lights and slowing down. I also make my lights adjustable on the move. That way I can push the...
by mojoe
Sun Jun 17, 2018 2:52 pm
Forum: Aircraft Power Only
Topic: 0320 Oil Change
Replies: 7
Views: 467

Re: 0320 Oil Change

Route your vent tube below the motor, not above it if parked outside. Condensation and rain run down hill. Run it hard each time you run it, especially if you idle for a long time. Make a point to run her good for a while before putting her on the trailer. Running the motor creates minute amounts of...
by mojoe
Tue Jun 12, 2018 6:32 pm
Forum: Other Important News
Topic: North Korea
Replies: 17
Views: 922

Re: North Korea

I am not a liberal, nor am I a conservative. I am a moderate. I do not lean toward extremists on either side. I use reason and logic, mixed with a healthy dose of perspective to base my political views. Every political candidate needs to earn my vote issue by issue, as I think too much to fit neatly...
by mojoe
Sun Jun 10, 2018 9:57 pm
Forum: Airboat Talk
Topic: slick bottom vs polly
Replies: 18
Views: 961

Re: slick bottom vs polly

In my opinion, if you run the St. John’s, especially at night or as the water is rising or dropping (lol) you need poly. I know the river well, and every now and again I hit something HARD! I like riding day time, and even more at night, and I like going where I want to go regardless of the water le...

Go to advanced search