Short hub.. I think 68" might have been 70".. Can't remember

I had the NGH on my old 12' full deck & ran dry no problem and it was nice and quiet. Boat ran in the low 70's. All around great prop.

Has anyone ever else ever seen them this thick?

http://www.fishcrack.com/video-divers-s ... of-mexico/

I'll bet he had a license to operate that thing too!

id definitely go with a 2 blade carbon fiber over the warp! You will be able to get a good push & the ease of pitch in the woods will make a world of difference when your adjusting it trying to find that sweet spot.

all depends on what you want performance wise,if your running the grass or the hill, how much you want to spend, how many people you want to haul around, how close you are to a supply of av gas..

Pickup truck driver saves kids from punk joyrider..
I know everyone here would do the same for their kids!
(second video down)

http://fox13now.com/2014/05/31/video-ca ... -children/

Blast off did my rigging and i was really pleased with his work (very reasonable priced). If you end up coming to orlando, place called powdertec (just west of DT) did my all powder coating for $400.

The "Omaha" cage styling is definately unique to say the least

Hey guys, just wanted to let everyone know that I found a shop in Orlando just east of downtown that does blasting and is very reasonable on price an does great work. I had the guy Dave soda blast my rigging for powder coat and it came out great! Check them out.they do anything & everything ALL BARE...

"you cannot shoot a python with a gun or a bow on or from any levee" http://www.pythonchallenge.org/registration.aspx If only they would allow the "hunters" in the python "challenge" to shoot them on the levees/roads and not just drive around in the water...(Wintertime snake hunt annnnd they are col...

Sign and click on dont send me emails..easy as that

Does anyone know the steps necessary to file a request to have cameras installed at the boat ramps in issue?

He definitely builds a nice boat! Keep us updated on the build!

JB, for only 6500 it could be yours!
http://miami.craigslist.org/mdc/boa/4164871786.html

the obama model wouldn't work- for display purposes only.

Recommended fuel pressure should be set at 7-1/2 psi maximum; 5 psi minimum. Fuel pressures above 7-1/2 psi can create severe fuel control problems and are not recommended. I pulled this off of the Holley website on the 1st page under general information. Hope you get her runnin good! http://www.hol...

Lookin forward to it!

Thanks! See you out there on the 6th

FTD 13x8 "Family Cruiser" 350sbc

What time is everyone meeting out there tomorrow for our "test & tune"( as the northerners say)?

I have one that is 3'' long. i sent you a pm

This is how alot of us do them down in the glades... Give yourself a few inches for the drop on the crows foot and it makes a nice stop so your rudders dont fold over themselves. Play with the placement of the crowfoot on the rudder it self moving it forward/backward so you can get maximum range of ...

I've got a 13x8 hundred thousands sled that I built with my buddy. We had Don Davis set the bottom and over 500hp pushin it. It runs like a bat out of hell and I couldn't imagine what a step hull with the same dimensions would be like. All I know is bigger is better to help with the torque roll!

If they opened the hunt area to southern glades and the aero jet area then they would actually have people workin areas where they are pretty thick...aka dry ground!!