Search found 916 matches

by skinny99
Thu Jun 27, 2013 11:06 pm
Forum: Airboat Tech
Topic: diamentions of a fatman seat
Replies: 1
Views: 377

Re: diamentions of a fatman seat

Seat shells are not standard but here is what Buttraxx does.

http://www.buttraxx.com/Shell_Information_page.html
by skinny99
Thu Jun 27, 2013 10:59 pm
Forum: Automotive Power Only
Topic: vibration ?
Replies: 19
Views: 1882

Re: vibration ?

can I just use a angle finder or do I need angle finder and track it with a stick on the transom. Start with the angle finder and then use the stick off the transom to get them perfect. Like others have mentioned sometimes you have to move them by just a smidge til you find perfect. I have had that...
by skinny99
Wed Jun 26, 2013 10:48 pm
Forum: Automotive Power Only
Topic: 350 dd
Replies: 4
Views: 475

Re: 350 dd

I don't think it will live long or perform very well if it does. High compression coupled with max load at low RPM's is a recipe for disaster.
by skinny99
Tue Jun 25, 2013 11:16 pm
Forum: Automotive Power Only
Topic: vibration ?
Replies: 19
Views: 1882

Re: vibration ?

I got the boat from skinny99 on here the engine was built for a airboat. I am pretty sure it was done right I have no complaints except the vibration at low to mid range rpms on the water not on the trailer. maybe I will just call him and ask if it has always done that. I know I would like to have ...
by skinny99
Mon Jun 24, 2013 6:36 pm
Forum: Airboat Talk
Topic: What's my boat worth roughly?
Replies: 25
Views: 2704

Re: What's my boat worth roughly?

budman6023 wrote:Dont like emt rigging last about 2 years and if its got a rotater gear box thats a nother bottom line product.other than that its a nice looking boat.
Really? How stupid are you?
by skinny99
Sun Jun 23, 2013 8:56 am
Forum: Airboat Tech
Topic: 3 blade "R" sweet spot
Replies: 12
Views: 1281

Re: 3 blade "R" sweet spot

What areas do you want to improve the performance of your boat? That is the real question. Somehow I will bet you don't care how fast your boat will go on top end but care a lot more about good cruise,smoothness and quietness. Sounds like a perfect 4 blade NGR to me. I bet you could upgrade pretty c...
by skinny99
Mon May 27, 2013 9:26 pm
Forum: Airboat Talk
Topic: drunk
Replies: 25
Views: 2878

Re: drunk

by skinny99
Fri May 24, 2013 10:23 pm
Forum: Automotive Power Only
Topic: 2.38 or 2.68
Replies: 12
Views: 1981

Re: 2.38 or 2.68

I don't think you have 550 horsepower. But a 2.68 will let what you have run dry ground better with what you have.
by skinny99
Mon May 20, 2013 11:11 pm
Forum: Prop Talk
Topic: Advice needed on 455 DD prop...What is it?
Replies: 11
Views: 957

Re: Advice needed on 455 DD prop...What is it?

Looks like a wall hanger to me!
by skinny99
Mon May 20, 2013 6:51 pm
Forum: Airboat Talk
Topic: First time in the drivers seat.
Replies: 12
Views: 1815

Re: First time in the drivers seat.

Everything you describes sounds normal. To help slow down when docking, set the idle as low as it will stay running. Also you can start and stop the engine as needed to help you come in slower. You can also learn to use the wind and/or current to help you ease into the docks. Remember to use some ex...
by skinny99
Sat May 18, 2013 10:04 am
Forum: Airboat Talk
Topic: whos stuck in area 2?
Replies: 12
Views: 1189

Re: whos stuck in area 2?

helms24 wrote:
Gary S wrote:So do they get charged for the helicopter and airboat showing up?
I would not think so....They pay taxes already...
The dad doesn't pay taxes. He receives them.
by skinny99
Sun May 05, 2013 10:25 pm
Forum: Airboat Tech
Topic: Mild 350 Prop Pitch
Replies: 11
Views: 958

Re: Mild 350 Prop Pitch

I read your post wrong. Sorry.
by skinny99
Sun May 05, 2013 8:49 am
Forum: Airboat Tech
Topic: Mild 350 Prop Pitch
Replies: 11
Views: 958

Re: Mild 350 Prop Pitch

I had this cam. http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=79&sb=2 It would work real good. Especially with your split rocker arm ratio. You really shouldn't have them split with the cam you have. It already has a larger exhaust lobe that "most" SBC seem to like. Also if you have...
by skinny99
Sat May 04, 2013 10:22 pm
Forum: Airboat Tech
Topic: Mild 350 Prop Pitch
Replies: 11
Views: 958

Re: Mild 350 Prop Pitch

With that little itty bitty cam you are prob well past your torque peak. Try putting just a little more pitch in it an setting it about 4600
RPM's on the trailer. I had a similar setup but with a bigger cam. 4800 seemed to be the best compromise between cruise and dry running ability.
by skinny99
Wed Apr 10, 2013 10:15 pm
Forum: Automotive Power Only
Topic: Heads for a sbc 400??
Replies: 41
Views: 3251

Re: Heads for a sbc 400??

Nice numbers. Would you post cam specs,comp ratio and carb size along with a dyno chart?
by skinny99
Wed Apr 10, 2013 7:14 pm
Forum: Gun Talk
Topic: Gun grab begins
Replies: 14
Views: 1871

Re: Gun grab begins

http://www.wivb.com/dpp/news/erie/gun-permit-suspended-over-medication Here is another article on it. This is from a news station. I keep beating this horse. But when LEO's and the military say they won't confiscate law abiding citizens weapons I look at situations like this. Do you think that if he...
by skinny99
Wed Apr 10, 2013 5:32 pm
Forum: Airboat Tech
Topic: Rotator Gearbox
Replies: 12
Views: 929

Re: Rotator Gearbox

flyinboomhesy wrote:How do you know if its a wide or narrow gear by looking at it. Is the housings diferent sizes or do I have to go by the serial # and call Classic
The wide gear ones have a W after the ratio.
by skinny99
Mon Apr 08, 2013 6:59 pm
Forum: Airboat Talk
Topic: Tree at Possum Bluff
Replies: 6
Views: 904

Re: Tree at Possum Bluff

by skinny99
Fri Apr 05, 2013 9:34 pm
Forum: Automotive Power Only
Topic: White's Preformance.com
Replies: 34
Views: 5115

Re: White's Preformance.com

running the AFR/#1100 ; 210cc intake 75cc combustion. same heads I had on 383. Just went with Dart 427 and bigger cam. Had some port match headers made from Innovactive , they look like they will let motor really breathe. Holley 850 Ultra HP carb and 5 inch rise, single plane intake. Set to fire to...
by skinny99
Tue Apr 02, 2013 8:41 am
Forum: Airboat Tech
Topic: Who can build new rigging
Replies: 39
Views: 3930

Re: Who can build new rigging

Please clarify the work done for $300. Was it just the prop cage? Did you bring the pre-bent hoops and all material?
by skinny99
Sat Mar 30, 2013 8:49 am
Forum: Airboat Talk
Topic: Any good sunset pics?
Replies: 75
Views: 10167

Re: Any good sunset pics?

The sun isn't quite setting yet, but a good pic.
by skinny99
Tue Mar 26, 2013 11:24 pm
Forum: Airboat Talk
Topic: DynaMarine Vapor - Thrash Test (NEW VIDEOS)
Replies: 183
Views: 14239

Re: DynaMarine Vapor - Thrash Test (NEW VIDEOS)

Helms you are the one walking right now! At least I have a running engine on my boat. :banghead: :angry5:

:old_glory:
by skinny99
Tue Mar 26, 2013 10:31 pm
Forum: Airboat Talk
Topic: DynaMarine Vapor - Thrash Test (NEW VIDEOS)
Replies: 183
Views: 14239

Re: DynaMarine Vapor - Thrash Test (NEW VIDEOS)

Helms I got an old beater boat. Not fast or especially nice. But I own it cheap and it runs good enough to follow all y'all's big money boats around. The use of a checkbook is not a sign of intelligence or experience.
by skinny99
Tue Mar 26, 2013 9:44 pm
Forum: Airboat Talk
Topic: DynaMarine Vapor - Thrash Test (NEW VIDEOS)
Replies: 183
Views: 14239

Re: DynaMarine Vapor - Thrash Test (NEW VIDEOS)

Well I'd like to think we'll have more than one!!! Sounds like a big old party to me... :thumbleft: A line up and get spanked party, and I ain't talkin' bout no birthday bash haha!!! Talking smack already! You very well may be an airboat racer. Never made a real pass yet and already king of the wor...
by skinny99
Tue Mar 26, 2013 9:40 pm
Forum: Hunting & Fishing
Topic: Heading to the lake for the first time ever this sat
Replies: 10
Views: 1041

Re: Heading to the lake for the first time ever this sat

lol this is gonna sound stupid but i actually practice taking off,coming in and loading my airboat without blasting anyone by placing my truck, trailer, and horse trailer in certain spot in the pasture Dont want to piss anyone off this weekend lol It don't sound stupid at all. You are way ahead of ...

Go to advanced search