Don't think so

Not with mags they have to be grounded to shut off the engine that's why you turn the switches upside down so down is off and up is on

Call wade hamant they have a adaptor and k n air cleaner

Sorry to hear this is a tragic loss for you and family he will be missed greatly by a lot of people

If u put av gas in it it will shut off properly

Oddesey battery

Cheaper to fix gpu

If u got the money get a set of flowed s/v and getal a set of pistons from combustion technologys thier around 130 each just my opinion

Turn it into a 180 or 200 and be done with it

Jimmy white 352-481-5180 he is a honest guy to buy a hull from he in lochlossa fl

It probably broke the pick up tube

You know damn good and well you have seen the post because you were trying to race a direct drive in the pro mod class .........what a coincidence. .........

I use carbon dioxide I think it burns hotter and cheaper I like using it

If u like working on them and spending money get u one I would stick with a 540 better gas milage and a lot more reliable just my opinion

I hope who ever drives the donated boat gets stuck and gets eat up by mosquitos and who ever donated the boat I hope you overpaid for it

Bruce at circle s welds flanges on cranks ........hope you r not in a hurry maybe he has one done 352-236-3580

If u get another just get a rotator pretty sure u can't get a hold of dan the airboat man and good luck with stinger I ordered a stinger gearbox 3 plus years ago from stinger and never called so I went a different route

Be careful with the engine, they are very expensive to work on. Bearings could be upward of $3k for a m10 set. This is for any of the enignes with a - and a number and the e-165/185/225. Other than that....if built right....are pretty good running motors. They have the small lifters like the gpus a...

Ill keep my money in my pocket and put a cover over it

2.88 and 3 or 4 blade r depending on horsepower

There those who have sunk one and who will .....that's got to suck hope no body got hurt

Call summit racing tell them u want 7mm copper core they r around 35 $ a set I always get two v8 universal sets with 90 on them

I get all my sterring cable from millers in ocala I think I paid around 130

I would use all 4 of them engine stand takes a lot of abuse

I did not use the center carb just used the four 5/16 bolts to hold it down