Search found 337 matches

by hogdoggin
Sun May 03, 2009 11:01 am
Forum: Aircraft Power Only
Topic: Sorry guys i have another 0360?
Replies: 8
Views: 653

Sorry guys i have another 0360?

So the boats down im waiting on a new hull so figured i would just go over everthing. Looks like i need to replace the rubber between the sump and intake tube. Now can i just use radiator hose or is that a bad ideal with gas running throw it?
by hogdoggin
Sat May 02, 2009 8:58 am
Forum: Aircraft Power Only
Topic: 0360 help!!!!!!
Replies: 4
Views: 590

Re: 0360 help!!!!!!

Thanks for the help guys. I'll pull the rocker and check everthing out.
by hogdoggin
Fri May 01, 2009 10:21 pm
Forum: Aircraft Power Only
Topic: 0360 help!!!!!!
Replies: 4
Views: 590

0360 help!!!!!!

Ok guys i was replaceing the valve cover gaskets on my angle valve 0360. And when i tryed pulling one of them off i notice it didnt want to come off like something was holding it. So when i got it off first thing i noticed was the rocker shaft was slid down. Than i looked at the valve cover and the ...
by hogdoggin
Mon Apr 20, 2009 10:51 pm
Forum: Aircraft Power Only
Topic: Hull height?
Replies: 4
Views: 634

Re: Hull height?

15" SIDES ON AN ALUMITECH IS SHALLOW.THAT WOULD BE 12" SIDES THE WAY DIAMONDBACK MEASURES THEM.BUT THAT BOAT WOULD BE SHARP AS HELL.I WOULD DO IT BUT I LIKE SHALLOW SIDES. Yeah i told them i wanted 15'' from the ground to the top of the side. I messured 15'' up from the bottom of my poly and put a ...
by hogdoggin
Sun Apr 19, 2009 10:27 pm
Forum: Aircraft Power Only
Topic: Hull height?
Replies: 4
Views: 634

Hull height?

I have a alumitech with a 0360 on it. My hull now has 22'' sides im haven alumitech build me a new hull 12' by 7'6'' Im haven them build it with 15'' sides I have a few friends that are running 18'' sides with 6 cylinders. What i was woundering is what do you'll think? Will it float as well as my bu...
by hogdoggin
Tue Mar 24, 2009 9:27 pm
Forum: Airboat Tech
Topic: Unloading the boat , your way ?
Replies: 24
Views: 1929

Re: Unloading the boat , your way ?

The only down side to dropping your boat on the ground is that it bends the back lip and cause it to porpuse. Lately I have been dropping mine in where the kicker boat do. Takes a little longer but it is easier on the boat. Geoff I just unwind a few feet of the strap. Than back her up and hit the b...
by hogdoggin
Tue Mar 24, 2009 6:07 pm
Forum: Aircraft Power Only
Topic: Leaking Push Rod Tubes
Replies: 10
Views: 838

Re: Leaking Push Rod Tubes

If there not leaking real bad sometimes you can spin the push rod tube and it will help. But if they are leaking bad your going to have to change them.
by hogdoggin
Tue Mar 24, 2009 5:44 pm
Forum: Aircraft Power Only
Topic: MOTOR
Replies: 21
Views: 1365

Re: MOTOR

A 160 would push that boat good. My buddy has the same hull with a wide deck 160 on it and it goes about any where and its great on gas.
by hogdoggin
Tue Mar 24, 2009 4:45 pm
Forum: Airboat Tech
Topic: Foam grip
Replies: 9
Views: 1185

Re: Foam grip

A little tip when i put my Foam grip on i used some of that 3M spray glue just shoot a lil down in the grip and slid it on. Makes it super easy to slid on and in a few mins it isn't going any where.
by hogdoggin
Sat Mar 14, 2009 12:54 pm
Forum: Aircraft Power Only
Topic: need help with oil problem
Replies: 6
Views: 726

Re: need help with oil problem

Rich Andrews wrote:so you went 9 to 3 qts or you kept fillin it up?
My old runout would live around 7 all day long,put in 8 and it would go to 7,put in 9 and it would go to 7
Yea my 0360 holds 8 put anymore and it will just blow it out.
by hogdoggin
Thu Mar 12, 2009 5:57 pm
Forum: Aircraft Power Only
Topic: Lycoming 180
Replies: 24
Views: 1419

Re: Lycoming 180

Ok so i have a 0360 wide deck angle valve motor I know its not the 200hp because its not injected but what the heck is the power of it. One thing forsure is i couldn't be more happy with it. In the year and a half i have had it i only had to get off of it one time and push it. All my fault came to t...
by hogdoggin
Thu Mar 12, 2009 5:05 pm
Forum: Airboat Talk
Topic: What pays your bills?
Replies: 125
Views: 6249

Re: What pays your bills?

Union sheet metal worker. Local 15
by hogdoggin
Tue Mar 10, 2009 11:34 pm
Forum: Airboat Talk
Topic: Lake jessup?
Replies: 5
Views: 614

Re: Lake jessup?

Sounds good thanks again for all the info I usally ride from jolly gator south to 520 thats my stomping grounds :D But like you said about the lake is somewhere you have ran a million times and its nothing new...that's how 46 south all the way to 520 is to me...i've ran it out so i'm looking for som...
by hogdoggin
Tue Mar 10, 2009 10:32 pm
Forum: Airboat Talk
Topic: Lake jessup?
Replies: 5
Views: 614

Re: Lake jessup?

Thanks Mood for the tip. So sounds like the better riding is on the river and not the lake?
by hogdoggin
Tue Mar 10, 2009 6:53 pm
Forum: Airboat Talk
Topic: Lake jessup?
Replies: 5
Views: 614

Lake jessup?

Well I got the day off tomorrow and im thinking bout putting in over on the west bridge of 46. Never ran this side of the river before but been wanting to run up in jessup and check it out. Maybe run over and grab some lunch at Black hammock fish camp. Was hopeing some of my S.A. brothers could poin...
by hogdoggin
Sun Mar 08, 2009 10:41 am
Forum: Airboat Talk
Topic: HELLO My Name Is
Replies: 109
Views: 4351

Re: HELLO My Name Is

john and my better half sara
by hogdoggin
Sat Feb 28, 2009 7:40 am
Forum: Airboat Talk
Topic: Hey all a Question from a new Guy But Getting Older
Replies: 6
Views: 649

Re: Hey all a Question from a new Guy But Getting Older

My buddys Cadillac does the same thing just when you shut it down. Almost sounds like the prop is loss. Like to find out what it is too.
by hogdoggin
Mon Feb 23, 2009 6:17 pm
Forum: Aircraft Power Only
Topic: TRYING OUT A Q PROP
Replies: 7
Views: 883

Re: TRYING OUT A Q PROP

I have a 68" Q on my boat with a 200 it has the small hub thats why its only 68" I turn it 2950 best prop ive run.
by hogdoggin
Fri Feb 20, 2009 9:33 pm
Forum: Airboat Talk
Topic: Orange Airboat Flag
Replies: 10
Views: 1462

Re: Orange Airboat Flag

Got this off FWC web site. Airboats must be equipped with a mast or flagpole displaying a flag that is at least 10 feet above the lowest part of the boat. The flag must be square or rectangular, at least 10 inches by 12 inches in size, international orange in color, and displayed so it is visible fr...
by hogdoggin
Mon Jan 05, 2009 4:01 pm
Forum: Automotive Power Only
Topic: Think it's time for a rebuild
Replies: 17
Views: 1057

Re: Think it's time for a rebuild

Drew if it was me i would rebuild it back stock with the timing chain and a alum intake. And let it eat. Its your first Boat I wouldn't put a lot of money in the motor because in another year you will want something different. I would take the extra money you were going to throw in the motor and sta...
by hogdoggin
Mon Dec 22, 2008 2:58 pm
Forum: Redneck Cuisine
Topic: Frog recipes
Replies: 24
Views: 3728

Re: Frog recipes

Thanks everyone! They all sound great looks like im going to have 2 get some more frogs so i can try every thing :lol:
by hogdoggin
Sun Dec 21, 2008 8:07 pm
Forum: Redneck Cuisine
Topic: Frog recipes
Replies: 24
Views: 3728

Frog recipes

Ok got my first bunch of frogs. :D My girlfriend and I cleaned them up and got them in the freezer. Now I've heard just batter them up and throw them in a pan and fri them up. But im looking for some tips from the pros I want my first bunch of frogs to be tasty. So i need a little help from my south...
by hogdoggin
Wed Dec 17, 2008 9:52 pm
Forum: Airboat Talk
Topic: Newbie in Geneva
Replies: 18
Views: 908

Re: Newbie in Geneva

I'll be putting in saturday after noon at Loughmans probably around 3pm if you want to ride along.
by hogdoggin
Wed Dec 10, 2008 9:46 pm
Forum: Airboat Talk
Topic: Newbie in Geneva
Replies: 18
Views: 908

Re: Newbie in Geneva

I live in Chuluota about 5 mins from ya. Some friends and i will be putting in at Loughmans saturday afternoon around 3 come on out.

Go to advanced search