Search found 319 matches

by Keeth1123
Thu Jun 19, 2008 10:29 pm
Forum: Automotive Power Only
Topic: Would This be a good combo? Carb/Manifold
Replies: 14
Views: 1143

Re: Would This be a good combo? Carb/Manifold

yes it will be a direct drive I am working on a 1990 5.7 chevy 350 for my airboat, I am wanting to start to get opinions on intake manifold and carb setup. I dont have a whole lot of money and I wanted an edelbrock carb but they are a ton of money unless Im just looking in the wrong places. Here is ...
by Keeth1123
Thu Jun 19, 2008 10:27 pm
Forum: Airboat Talk
Topic: poly installed
Replies: 9
Views: 977

Re: poly installed

I already know that I cant afford it but why not be able to know some more knowledge? I wasnt born with this knowledfe and the only wasy I see to get it is to ask the pros :mrgreen:
by Keeth1123
Thu Jun 19, 2008 3:28 pm
Forum: Automotive Power Only
Topic: Would This be a good combo? Carb/Manifold
Replies: 14
Views: 1143

Re: Would This be a good combo? Carb/Manifold

I hope so I got my engine stand out and have to go buy a chain hoist here shortly than I can continue break down, do you know anyother website besides ebay and summitracing that sells edelbrock carbs and list prices, Because edelbrock.com doesnt list the prices and thats never a good sign lol
by Keeth1123
Thu Jun 19, 2008 3:10 pm
Forum: Automotive Power Only
Topic: Would This be a good combo? Carb/Manifold
Replies: 14
Views: 1143

Re: Would This be a good combo? Carb/Manifold

located in good ole haines city, polk county FL


I am considering the airgap because the chepie is like 150 so why ot spend an extra 100 bucks and get what everyone says is the best :?
by Keeth1123
Thu Jun 19, 2008 2:34 pm
Forum: Automotive Power Only
Topic: Would This be a good combo? Carb/Manifold
Replies: 14
Views: 1143

Re: Would This be a good combo? Carb/Manifold

I really need some help on this one, I Found an edel brock peformer airgap with dual plane intake, It is pretty expensive but alot less than what I foudn on other sites, http://store.summitracing.com/partdetail.asp?part=EDL%2D2604&autoview=sku I se a couple of other intakes that are dual plane for a...
by Keeth1123
Thu Jun 19, 2008 12:54 pm
Forum: Airboat Talk
Topic: poly installed
Replies: 9
Views: 977

Re: poly installed

How long doespoly last and what does it cost. Is it something needed only if you run alot of dry ground?
by Keeth1123
Thu Jun 19, 2008 11:23 am
Forum: Airboat Talk
Topic: RAIN,RAIN
Replies: 5
Views: 702

Re: RAIN,RAIN

10-4
by Keeth1123
Thu Jun 19, 2008 11:14 am
Forum: Airboat Talk
Topic: RAIN,RAIN
Replies: 5
Views: 702

Re: RAIN,RAIN

I know we need rain and I wish it would keep on comin on but by the time I get my boat ready I wont be able to find any shallow water to practice in lol

Rained alot yesterday around me :bounce:
by Keeth1123
Thu Jun 19, 2008 10:54 am
Forum: Automotive Power Only
Topic: Would This be a good combo? Carb/Manifold
Replies: 14
Views: 1143

Would This be a good combo? Carb/Manifold

I am working on a 1990 5.7 chevy 350 for my airboat, I am wanting to start to get opinions on intake manifold and carb setup. I dont have a whole lot of money and I wanted an edelbrock carb but they are a ton of money unless Im just looking in the wrong places. Here is a combo I have on my list http...
by Keeth1123
Wed Jun 18, 2008 2:56 pm
Forum: Airboat Talk
Topic: heres another good deal!!!
Replies: 6
Views: 1105

Re: heres another good deal!!!

I learned My lesson about driving far to look for something but with a car, I drove 100 Miles to look at a Jeep because It was 1,200 Over Blue book and all the pictures were spotless and made the car look like a great deal ( being over priced made me think it was worth it too) When I arrived I found...
by Keeth1123
Tue Jun 17, 2008 2:04 pm
Forum: Airboat Talk
Topic: Warp Drive Props
Replies: 19
Views: 5160

Re: Warp Drive Props

would it work on a dd350?
by Keeth1123
Thu Jun 12, 2008 9:44 pm
Forum: Automotive Power Only
Topic: goin to look at a motor, any advice on what to look for?
Replies: 8
Views: 1008

Re: goin to look at a motor, any advice on what to look for?

Update: Went and bought the motor, Paid $150.00 She looks pretty rough but its jsut another project, Anyone chime in on parts that I will need to make the switch to a carb along with reccommended bands/models it would be nice. also can someone explain to me which would be better a 2bbl or 4bbl carb?...
by Keeth1123
Thu Jun 12, 2008 1:48 pm
Forum: Automotive Power Only
Topic: goin to look at a motor, any advice on what to look for?
Replies: 8
Views: 1008

Re: goin to look at a motor, any advice on what to look for?

Dont have anywood to make a crate but I do have a few 31x10x15 mudders layin around I mught strap it down and see how she rides
by Keeth1123
Thu Jun 12, 2008 10:54 am
Forum: Automotive Power Only
Topic: goin to look at a motor, any advice on what to look for?
Replies: 8
Views: 1008

goin to look at a motor, any advice on what to look for?

I am heading today to Look at a 1990 Chevy 350 that I tracked down, The add says it has everything except throttle body, which doesnt effect me. The owner said the motor has 75,000 miles on it and it came out of a truck he bought for parts, He said he drove the truck home and then started tkaing the...
by Keeth1123
Thu Jun 05, 2008 3:13 pm
Forum: Automotive Power Only
Topic: R N D props
Replies: 7
Views: 1043

Re: R N D props

Wow, Where are they located?
by Keeth1123
Fri May 30, 2008 10:55 am
Forum: Airboat Talk
Topic: Finally something that can make me quit drinking beer!
Replies: 45
Views: 2593

Re: Finally something that can make me quit drinking beer!

Bud LImes were so good too

o well
About to hop on the coors express and head for the rockies!



SILVER BULLET!
by Keeth1123
Fri May 30, 2008 9:09 am
Forum: Airboat Talk
Topic: Rudder questions/ Hull Work
Replies: 3
Views: 667

Re: Rudder questions/ Hull Work

These pics are not too good but they are the worst spots http://i179.photobucket.com/albums/w287/keeth1123/DSCN0017.jpg http://i179.photobucket.com/albums/w287/keeth1123/DSCN0018.jpg I looked under teh hull again last night and it looks like the factory fiberglass mold was coverd by a thin coat of s...
by Keeth1123
Thu May 29, 2008 8:40 pm
Forum: Airboat Talk
Topic: Where to buy Fiberglass
Replies: 9
Views: 819

Re: Where to buy Fiberglass

thanks for all the input

so basically what shape does a fiberglass hull have to be in to where it cant be repaired? Or does it all depend on how well you can glass?
by Keeth1123
Thu May 29, 2008 2:19 pm
Forum: Airboat Talk
Topic: Whats this worth
Replies: 9
Views: 902

Re: Whats this worth

******** wrote:Find somebody you dont like and give it to them

LOL
by Keeth1123
Thu May 29, 2008 1:44 pm
Forum: Airboat Talk
Topic: Where to buy Fiberglass
Replies: 9
Views: 819

Re: Where to buy Fiberglass

look online for Raka.com or UScomposites.com wow Ididnt know there was so many choices. What would be my best bet for re-doin the bottom of my airboat and repairing a couple cracks, The bottom is peeled back where the boat used to sit on unprotected wood (probably dry loaded this way to) The hull i...
by Keeth1123
Thu May 29, 2008 1:11 pm
Forum: Airboat Talk
Topic: Where to buy Fiberglass
Replies: 9
Views: 819

Where to buy Fiberglass

I have called several places around me and each one says that they dont sell the type i need, Or they say they wont sell the materials but will only reapair the boat for me. Im loookin for a place in either winterhaven or lakeland that will sell me everything I need to get my project done. if anyone...
by Keeth1123
Wed May 28, 2008 11:12 pm
Forum: Automotive Power Only
Topic: 350 And Direct Drive
Replies: 23
Views: 3573

Re: 350 And Direct Drive

Looks like a good deal. I run a 12.6 with a 350 dd with a 6 blade worpdrive, it is loud but it does what I want it to do and I can run dry but I going to put a sprayer on it to help it out alittle more. But I love my boat it takes me out and brings me home. those warp drives are bad wish I could ge...
by Keeth1123
Wed May 28, 2008 10:41 pm
Forum: Airboat Talk
Topic: Whats this worth
Replies: 9
Views: 902

Re: Whats this worth

Im not sure what its worth but i like the tires on the jeep where did you get those? Those tires were already on the jeep when we got it, We traded an Old truck for this Jeep that barley ran. All we had to do was connect to vacuum lines that were hanging everywhere and get new spark plugs and now t...
by Keeth1123
Wed May 28, 2008 10:36 pm
Forum: Airboat Talk
Topic: Whats this worth
Replies: 9
Views: 902

Re: Whats this worth

some of the welds are broken cause the guy was doing something I dont know I didnt understand what he was talkin about but it is set up for a big block and it got thrown in the deal so It dont offend me what ya think bud thats why I ask to get opinions
by Keeth1123
Wed May 28, 2008 9:03 pm
Forum: Airboat Talk
Topic: Whats this worth
Replies: 9
Views: 902

Whats this worth

Here is an extra set of square tubing metal works that came with my hull when I bought it. What is this worth I dont think Im selling it just was wonderin http://i179.photobucket.com/albums/w287/keeth1123/DSCN0028.jpg http://i179.photobucket.com/albums/w287/keeth1123/DSCN0027.jpg http://i179.photobu...

Go to advanced search