Search found 115 matches

by FISHSTICKER
Wed May 15, 2019 1:08 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

We work on the frogs so hard in Louisiana they close the season on us for April and May. And no shooting.

I actually saw a pic of one of those signs in a video about the park. I was wondering what the hell they were talking about.
by FISHSTICKER
Mon May 13, 2019 10:07 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Planning a week hiking trip to Olympic National Park with my son. That will slow progress a bit but we still moving along. Scored some 304 stainless tube, aluminum and 304 plate for a good price. As a side note I would imagine all that stainless rigging I see was not back purged when it was welded. ...
by FISHSTICKER
Fri May 10, 2019 5:16 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Yea I have seen that. If the adapter needed a tune I would pass for sure :D
by FISHSTICKER
Fri May 10, 2019 3:54 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Didn’t want to drop the coin on a Miller so I went cheap and ordered an AHP ALPHATIG 201XD. Should be here in a week or so. I’m sure it will TIG weld better than I can. :)
by FISHSTICKER
Fri May 10, 2019 3:48 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Image
by FISHSTICKER
Fri May 10, 2019 3:47 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Cool. I will check that out. I’ve been to their web site and did not see a LTG / SBC adapter.

Thanks.

Have not done much lately but gather some smal parts, metal stock and such. I did do a little miller maintenance. And ordered a TIG machine to play with.

Image
by FISHSTICKER
Thu May 02, 2019 10:34 am
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Well almost. I will end up adding a cut out for the starter.
by FISHSTICKER
Thu May 02, 2019 10:10 am
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Thanks kw. Got it.

Template is done

Image
by FISHSTICKER
Sat Apr 27, 2019 10:55 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

The camp life. It’s a struggle.......

Image
by FISHSTICKER
Thu Apr 25, 2019 9:23 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Ok..... now I know who Shane is. Thanks. So the template was near perfect. need to rotate the right dowel pin up along the radial distance from the center of crank maybe .010" and I think it will be as perfect as a man can measure with a 24" caliper. If anyone is interested in how to accurately meas...
by FISHSTICKER
Thu Apr 25, 2019 7:43 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Contact him to get a Ballistic Gear Box? He works for Ballistic?
by FISHSTICKER
Thu Apr 25, 2019 7:29 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

I have called 10 times, sent emails, smoke signals................I have never tried harder to give a company my money. I can't get a return call from Ballistic. I picked the LTG specifically because Ballistic makes a direct bolt on box. But I can't buy it if they refuse to sell it to me...............
by FISHSTICKER
Thu Apr 25, 2019 5:18 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Which bell housing bolt pattern is most common and/ or best supported by the gearbox manufacturers......or which one would be the simplest if there is such a comparison to be made. I should probably consider bolt pattern interference between the two also.
by FISHSTICKER
Thu Apr 25, 2019 5:10 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

I don’t know yet. I’m open to recommendations.
by FISHSTICKER
Thu Apr 25, 2019 11:21 am
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

I see some resemblance
Image
by FISHSTICKER
Thu Apr 25, 2019 11:19 am
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

First draft
Image
by FISHSTICKER
Tue Apr 23, 2019 8:49 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Image

Harness off. Will drop it in the mail tomorrow.
by FISHSTICKER
Tue Apr 23, 2019 8:48 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

On the stand
Image
by FISHSTICKER
Mon Apr 22, 2019 8:53 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

br,lc,la I would like to see those wiring diagrams. They wouldn't happen to be in pdf form? Let me know when you feel like coming ride with us. hogdoggin I looked at those guys also. I decided to give Mitch a shot. Let us know how that works out for your friend. If we Both end up satisfied that will...
by FISHSTICKER
Mon Apr 22, 2019 2:31 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Image

Me and my navigator :)
by FISHSTICKER
Mon Apr 22, 2019 2:28 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Image

Headed to the new stand. And yes more x bracing will be added before we attempt a startup.
by FISHSTICKER
Mon Apr 22, 2019 2:25 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Image
by FISHSTICKER
Mon Apr 22, 2019 2:24 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Image
by FISHSTICKER
Mon Apr 22, 2019 2:22 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Have not done much lately. Had to get ready for the Easter weekend. Spent a few days at the camp. Had a nice weekend riding and playing. I did get the motor off the engine stand. Moving it to a new stand so I can get the necessary bellhousing measurements for an adapter. Also made a deal with Mitch ...
by FISHSTICKER
Mon Apr 15, 2019 9:39 pm
Forum: Automotive Power Only
Topic: ECOTEC 2.0 LTG SWAP
Replies: 144
Views: 8053

Re: ECOTEC 2.0 LTG SWAP

Image

Got a little care package from the great state of Florida.

Thanks Mr. David.

Go to advanced search