good job man, can't wait to hear it at the tower. Hopefully playin some Hank, Haggard and Jones.

Vaughn 407-365-9376

Let me first send my condolances for the loss of a loved one.
If you want to get to area 3 in the glades then feel free to PM me, I will be happy to have a cabin available for you at Mack's Fish Camp.
There is close access to area's 2, 3A and 3B.

Prayer sent.

I was only a few months old, when my grandpa the original "OL' MAN JONES" Put me on his lap and took me out giggin at Mack's Fish Camp and we used to go to Andy town, area2 and Thompsons Park area and south of the loop. Those days growing up out here were priceless and it is a real shame t...

*BBC - 1965-66 396 c.i. models have an oiling groove in the rear journal. The listed part numbered cams will not fit these models, so if you require a camshaft with the oiling groove, please call us at 1-800-999-0853 or click here to contact us, and we will assist you with placing an order. Descript...

May God be with you and all involved in this and may He keep us all safe from this threat in the Florida heat. Prayers sent

I have used, Comp Cams 12236-3 marine xtreme K-kits in the past on my 355's and loved the all out performance. throttle response thru all rpm is really snappy and makes good torque. With proper complimenting heads and pistons, I would say you could easily make 400 hp and 415 tq. Although, I will agr...

Ya can call Dan at Stinger.... or Sam at Panther, they both usually have 2nd hand boxes for sale with "as-new" warranties. :cheers: Unfortunately, most gearboxes for sale in the private market are someone elses problem and allways worth as much as the factory reconditioned ones. If you get...

VAUGN .....( owner of company ) Precision Gear Drive in Oviedo, Fl Real knowledgable guy and a straight shooter. Be prepared to spend a nice chunk of change, if your spurr gears show any wear. Vaugn will not warranty repair w/o replacement. Some rebuilds can be as expensive as a second hand/ re-buil...

I also would agree with the guys about 75 - 41 and coming across Tmiami trail. However I would recommend making a right at 1)Monroe station and cutting across LOOP RD ., 1 of only 5 T C P's (traditional cultural properties) You can stop in at 2 )Everglades Sportsmans Club while there. After finishin...

I also would agree with the guys about 75 - 41 and coming across Tmiami trail. However I would recommend making a right at 1)Monroe station and cutting across LOOP RD ., 1 of only 5 T C P's (traditional cultural properties) You can stop in at 2 )Everglades Sportsmans Club while there. After finishin...

Hey,
let me know about your combo and what yo think of its differiences (pros and cons).

thanks.

That's alot of tracking differience! The 10 grams is livable, but 3/4" is gonna destroy the bearings, possibly crank of whatever it is attached to and mabey even wipe out the prop all together. Try to afford a good used Whirlwind or Seinsenich. JMHO

Adapter to crank should be 50-60 ft. lbs
Prop bolts should never exceed 35 ft. lbs on a wood prop.
Start with 30 at prop run on trailer a couple minutes re-torque to 35 run and recheck torque agian.
Allways use Never Sieze on hub-crank bolts.
PM me if you need more advise.

T O R Q U E I love em'

Thank you Big Daddy, We need more red blooded americans like you to get the word out there for a rallied wilderness revival (on our terms). Keep this thread alive and let's all contribute our individual part, in due dilligence to see this heavy issue blown to the brink :violent1: :angel4: . Let all ...

This looks like JIMMY SWAIT's work to me. his son john still builds them just like it. I had a 13' 3/4 deck and loved it.

I would like to get together some time and go over your knowledge of the Glades and it's surrounding areas. I am a native and consider myself lucky to have grown up in the everglades. I am impressed with your knowledge of the water cycle and the effects of man on/in our prescious everglades. Please ...

Depending on H.P., cam and rigging clearance, a 74-78" paddle prop & 38-48* of pitch ( a 78LR44 is standard for a 2:1 and a 350) so with your ratio and a well built 4.3 that's close to the right prop for you. If you don't have clearance then go to a 72 or 74 48 or 50 pitch. JMO Hope this he...

My 12 blade was @ 11* & produced 5300r's at motor.

HAVE A GREAT BIRTHDAY KEITH!! Call me net time you're down south, I got a cabin with your name on it and some real good riding area to boot.

Don't look for a good price in Cocoa

3 Blade Master Blaster 2.3 from Whirl Wind ( customer service 2nd to none )
Stinger 2.37 reduction
Probably set at 23-25 degreesom the hub ( depends on torque and cam really)

JMHO

I'll be going with my family. where y'all put in at? 40 mile bend? hope to see everyone this weekend.

lookin like Sunday is gonna be the day